• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.283-291
• /
• 2009

Methyl Bromide that was used as fumigation gas turned out to be the substance of destroying the ozone layer. For that reason, at the Montreal Protocol in 1987 the use of methyl bromide was forbidden starting 2005 in the advanced country. Also according to the 2007 Bali Protocolly methyl bromide is expected to be forbidden and therefore the purpose of this study is to find out the effects of substitution fumigation gas (Ethylene Oxide+HFC 134a, Methyl Iodide, Cyanogen and Argon) on the metal(silver, copper and iron), wood(oregon pine), pigment(yellow, red, blue, white and black), textile(hemp, ramie, jute, silk1 and silk2 / indigo, safflower and cork) and paper. After the fumigation test, ethylene oxide+HFC 134a did not have changes in the weight and color of the material itself before and after the experiment. On exterior alteration, color change occurred partly on paper and metal. Also, in most materials color change extent was 0.5 to 1.5 on the average and showed scanty difference. The materials after the fumigation test with methyl iodide did not show weight changes after the test. However, color changes more than 1.0 was shown in most of the materials especially in dyed textile material. In blue pigment, the discoloration on the surface could be seen by naked eyes. Fumigation test with cyanogen gas did not show weight changes and discoloration is more than 1.5 before and after the test. The weight changes of test materials with the argon gas was decreased about 3 to 6%. It can be observed that discoloration on paper was generated. Color changes can be seen on jute dyed with safflower and cork for two weeks with argon gas and the extent was 6.3 and 6.0.

• Journal of Conservation Science
• /
• v.19
• /
• pp.57-66
• /
• 2006

The rock consisting the Naju-Dongmunoi-Seogdanggan (Stone Stele)(Treasure number 49) is biotite granite of medium to coarse grains which might be taken from nearby area. The rock is mainly composed of quartz, plagioclase, alkali feldspar and biotite. Due to strong weathering grail peel-off and surface exfoliation are well developed. The rock surface is changed into pale brown or pale black colors according to weathering, organism and weathering product of iron band. Major deterioration phenomena are grain peel-off, surface exfoliation, cracks and damage which may be originally classified into weathering, effect of weathering product of iron band, organisms, structural unstabilities and impact.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.511-516
• /
• 2009

Photodegradation characteristics of polyolefin composites were studied. Thermogravimetric analysis results suggest that the polyolefin blends used in this study have different amounts of talc. The mechanical behaviors of polyolefin blends, which experienced UV-irradiation in accordance with SAE J1960, are investigated using tensile and Izod impact tests. These results show that as the UV-exposure time increases, a significant drop in the elongation at break and impact strength at a low temperature are observed. This may be explained by the decreases in elastic energy derived from the scission of polymer molecular chains and the low density of entanglement after UV- photodegradation. Scanning electron microscopy observations indicate that no crack and surface damage are observed, while the additional talc particles are exposed, on the UV-exposed surfaces. The exposure of talc particles may be responsible for the discoloration of UV-exposed polyolefin blend surface. Observation using Fourier transform infrared spectroscopy (FT-IR) confirms the presence of photodegradation on the surface of UV-exposed polyolefin blend.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.95-101
• /
• 2014

Silver objects tarnish with black from reaction with sulfurous acid or hydrogen sulfide of atmospheric. Blackening of silver objects results from formation of silver sulfide($Ag_2O$) on the surface. Silver sulfide usually is usually removed by conservation treatment. There are several cleaning methods such as chemical, electrochemical and micro-abrasion cleaning, but all of them consume silver. This study investigated the safe and effective parameter of laser cleaning by test on silver coupons. Laser cleaning is a selective process for the removal of specific substances. At first, laser cleaning applied to plain silver coupons, which were not corroded, to find out the safe range of laser energy density. From results, plain silver coupons were not changed at 1064nm below $4.00J/cm^2$ and at 532nm below $2.39J/cm^2$. The corrosion layer(silver sulfide) of artifical corroded silver coupons was removed at 1064nm with $2.39J/cm^2$ by 5~10 pulses and at 532nm with $1.19J/cm^2$ by 5~10 pulses. The removal thickness of corrosion layer was about 13-25nm per a laser pulse using AES analysis. In addition, laser cleaning tested the tarnish silver rings based on the results of silver coupons. As a result of test, the black surface were clean successfully and gave luster of silver, which showed the application possibility of laser cleaning for silver objects.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.196-201
• /
• 2020

In order to increase the durability of the pipe framed greenhouse, galvanized steel pipes with four corrosion protection treatments were installed in the greenhouse. After 20 years, experiments on surface corrosion and strength change were conducted. Control (untreated) pipes exposed in the atmosphere showed a 1.3% reduction in strength, but little difference from other treatments. The strength of heavy protective coating pipes buried in the ground decreased by 0.6%, showing little change, but untreated pipes decreased by 15.7%. And antirust paint and asphalt coating pipes decreased by 4.2~4.4%. Pipes exposed in the atmosphere did not show severe corrosion in all samples. There was no change in heavy protective coating pipes, and no rust was found in antirust painting pipes either and there was only slight discoloration. Asphalt coating pipes discolored black and some rust was found, and untreated pipes were rusted by 20~30% of the surface. However, untreated pipes buried in the ground were completely rusted, and asphalt coating pipes were rusted by 80~90% of the surface. Antirust painting pipes were rusted by 20~30%, and heavy protective coating pipes did not change almost. The heavy protective coating treatment showed a clear corrosion protection effect even in the parts buried in the ground, and the antirust painting treatment also showed some corrosion protection effect. Therefore, it is judged to be applicable to the field of pipe framed greenhouses.

• Journal of Conservation Science
• /
• v.35 no.2
• /
• pp.159-168
• /
• 2019

Plasticizers, which are added to plastics, can cause exudation, which means that the plasticizer comes out from surface of the plastics. This causes the surface of plastic artworks to become sticky, and this allows dust and pollutants to become attached to the surface. Therefore, in this study, the degradation characteristics and chemical cleaning methods of each type of plasticizer are evaluated using PVC specimens. To evaluate the degradation characteristics and chemical cleaning methods, microscopic observation, chromaticity and weight measurement, and FT-IR spectroscopy were performed. The results showed that PVCs containing different plasticizers have different degradation patterns. Especially, the PVC containing TOTM showed discoloration and exudation. In the evaluation of the chemical cleaning methods, ethyl alcohol and KOH solution showed good effects, but their stability was not good. Surfactant was found to have a good cleaning effect and stability as a cleaner for exudated plasticizers.

• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.675-687
• /
• 2005

The rocks of the five storied stone pagoda in the Jeongrimsaji temple site are 149 materials in total with porphyritic biotite granodiorite. They include pegmatite veinlet, basic xenolith and evenly developed plagioclase porphyry. This stone pagoda has comparably small fracture and cracks which are farmed in the times of rock properties, but surface exfoliation and granular decomposition are in process actively since the rocks are generally weakened from the influence of air contaminants and acid rain. Structural instability of constituting rocks in the 4th roof materials are observed to occur from distortion and tilt. Such instability is judged to threat stability of the upper part of the stone pagoda. Also, chemical weathering is operating even more as the contaminants, ferro-manganese hydroxides eluted from water-rock interaction on the rock surface. Most of the rock surface is covered with yellowish brown, dark black and light gray contaminants, and especially occur in the lower part of the roof rocks on each floor. The roof underpinning rocks are severe in surface pigmentation from manganese hydroxides and light gray contaminants. The surface of rocks lives bacteria. algae, lichen, or moss and diverse productions in colors of light gray, dark Bray and dark green. Grayish white crustose lichen grows thick on the surface with darkly discolored by fungi and algae in the first stage on basement rocks, and weeds grows wild on the upper part of each roof rocks. This stone pagoda must closely observe the movements of the upper part rock materials through minute safety diagnosis and long term monitoring for structural stability. Especially since the surface discoloration of rocks and pigmentation of secondary contaminants are severe, establishment of general restoration and scientific conservation treatment are necessary through more detailed study for this stone pagoda.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.115.1-115.1
• /
• 2016

Electrochemical anodization has been interested due to its useful way for the nano-scale architecture of metal oxides obtained from a metal substrate. By using this method, it is easy to control the morphology of the oxide materials by controlling electrochemical conditions. Among oxide materials obtained from the transition metals such as Ti, V, W, etc., in this paper, the morphological study of anodized $TiO_2$ was employed at various voltage conditions in fluoric based electrolyte, and the effects of applied voltage (sweep rate and retention time) on the tube morphologies were investigated. Furthermore, by using anodization of tungsten substrate (W), we fabricated the porous structure of $WO_3$ and provided merits of tailored structure for the hybridization of inorganic and organic materials as electrochromic (EC) applications. The hybrid porous $WO_3$ shows multi-chromic properties during the EC reactions at specific voltage conditions. From these results, the anodization process with tailoring nano-structure is one of the promising methods for EC applications.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.138-138
• /
• 2016

의료용 공구로 사용되는 합금은 마르텐사이트계 스테인리스강의 대표 강종인 420스테인리스강이 사용되며, 이 합금은 고온의 오스테나이트 상태에서 ?칭하면 마르텐사이트 조직으로 변태하여 현저하게 경화하는 특징을 가지고 있으며, 오스테나이트화 후 템퍼링시 우수한 기계적 성질이 얻어진다. 그러나 템퍼링 온도의 영향으로 석출탄화물이 형성되어 기계적 성질이나 내식성이 저하되는 단점이 있다. 본 연구에서는 STS 420스테인리스강의 템퍼링 온도에 의한 내식성 문제점을 개선시키기 위해 STS630 합금을 사용하여 다양한 석출 열처리 조건 및 플라즈마 질화공정을 연구하였다. 구입한 소재의 균일한 성분 조정을 통한 미세 편석 및 물성부여를 위한 균질화 조건 도출 열처리를 실시하였으며, STS630의 고용화열처리는 오스테나이트 균일조직이 되는 온도영역으로 가열하여 급냉하는 것으로 마르텐사이트 변태시키는 열처리를 진행하였으며, 열처리온도는 $1020{\sim}1060^{\circ}C$로 설정하였다. 석출경화 열처리는 $460{\sim}480^{\circ}C$와 $500{\sim}520^{\circ}C$의 온도에서 실시, 제품에 따른 인성을 부여하였으며, 질화공정은 플라즈마 장비를 이용하여 플라즈마 가열 ${\rightarrow}$플라즈마 이온질화를 통하여 가장 최적의 공정을 도출하였다.- 질화가 마무리 된 시료는 내식성 및 물성 평가를 통해 제품으로서의 특성을 평가하였다. 석출경화 열처리에 의해 STS420합금에 버금가는 인장강도 및 경도값이 나타났으며, 플라즈마 질화에 따라 물성 값의 향상이 나타났다. 용출실험결과 STS420합금의 경우 Fe, Cr원소의 용출이 나타나며 변색이 형성되었으나 STS630합금의 경우 그 현상이 미미하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.147-147
• /
• 2016

In general, organic electrochromic (EC) materials have been known to be electrochemically unstable during the ionic exchange process. One effective method to realize stable EC materials is incorporating graphene derivatives in the polymer matrix, by using the strong interaction between graphene derivatives and polymer. However, previous studies are limited graphene derivatives. In this study, we developed a polymer-graphene derivative complex with the chemical assistance of a surfactant (octadecylamine, ODA). Surfactant-assisted graphene oxide (GO-ODA) was introduced as a protective layer on the electrochromic poly (3-hexyl thiophene) (P3HT) films by the Langmuir-Schaefer method. The deposition of GO-ODA protective layer with high coverage was confirmed by atomic force microscopy. The strong interactions between GO-ODA and P3HT were examined with UV-Vis spectrophotometry and X-ray photoelectron spectroscopy. Electrochemical and electrochromic investigations revealed that the GO-ODA layer greatly improved the long-term cyclability of the P3HT film. These findings imply that the GO-ODA complex has a significant role in creating stable EC cycling, due to its strong interaction with the P3HT film.