• Title/Summary/Keyword: 표류선

Search Result 25, Processing Time 0.031 seconds

A Study on the Slowly Varying Wave Drift Force Acting on a Semi-Submersible Platform in Waves (반잠수식 시추선에 작용하는 장주기 표류력에 관한 연구)

  • S.Y.,Hong;P.M.,Lee;D.C.,Hong
    • Bulletin of the Society of Naval Architects of Korea
    • /
    • v.26 no.2
    • /
    • pp.49-63
    • /
    • 1989
  • Wave drift forces which are small in magnitudes compared to the first order wave exciting forces can cause very large motion of a vessel in waves. In this paper a theoretical and experimental analysis is made of the mean and slowly varying wave dirft forces on the semi-submersible platform. Theoretical calculations are performed by using near field method with three dimensional diffraction theory and model tests are carried out in regular and irregular waves with a 1/60 semi model. Test results are compared with theoretical calculations and the mooring spring effects in the test are discussed.

  • PDF

Drift Motion Analyses for a FPSO with Spread Mooring Systems (다점 계류된 원유 저장선에 대한 표류 운동 해석)

  • 이호영;임춘규;신현경
    • Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
    • /
    • 2001.05a
    • /
    • pp.222-227
    • /
    • 2001
  • The time simulation of slow drift motions of moored FPSO in waves is presented. The equation of motion based on Cummin's theory of impulse responses are employed, and are consisted of horizonal plane -surge, sway and yaw. The added mass coefficients, wave damping coefficients, first order wave exciting forces and the second order wave drift forces involved in the equations are obtained from a three-dimensional panel method in the frequency domain. The mooring lines are modeled quasistatically as catenary for chains and touchdown. As for numerical example, time domain analyses are carried out for a box-type FPSO in long crest irregular wave condition.

  • PDF

Study on Hydrodynamic Forces Acting on a Very Large Container Vessel at Lower Depths in Both Still Water and Waves (정수중 및 파랑중 저수심에서의 초대형 컨테이너선에 작용하는 유체력 특성에 관한 연구)

  • Lee, Sangmin
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.23 no.6
    • /
    • pp.613-619
    • /
    • 2017
  • Recently, the size of container ships has been progressively increasing, and much attention is required for safe navigation in shallow areas such as coastal waters and ports due to increases in draft. It is necessary to understand the characteristics of ship motion not only in still waters but also with waves. Especially in shallow regions, squat due to the vertical movement of the ship can be an important evaluation factor for the safe navigation, and wave drift force acting in the horizontal direction can have a great influence on the maneuverability of a ship. In this study, a numerical simulation using computational fluid dynamics has been performed for the wave exciting force acting in the vertical direction and the wave drift force acting in the horizontal direction for a very large container vessel sailing in shallow zone. As a result, it was found that total resistance in still waters greatly increased in shallow water. Wave drift force was shown to decrease given longer wavelengths regardless of water depth. It was observed that the wave exciting force in shallow water was considerably larger than at other water depths. As wave height against the central part of the ship lowered, the aft side rose.

Characteristic of Micro-Scale Semiconductor Bridge(SCB) Plasma (마이크로 규모의 반도체브리지 플라스마 특성)

  • 김종욱;김선환;이정복;박종욱
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.02a
    • /
    • pp.280-281
    • /
    • 2003
  • 본 연구는 전자파, 표류전압, 정전기 등 위험한 환경에서 충분한 안전성과 우수한 성능을 보이며 금속발열선(HBW)에 비해 빠른 작동시간을 가지는 반도체브리지 착화장치를 개발하여 로켓 추진기관 및 자동차 에어백 (Air-Bag)에 적용하는데 그 목적이 있다. 로켓 추진기관 착화장치 및 안전장치에는 고도의 안전성 및 신뢰성이 요구되어 기존의 금속발열선 착화장치보다 전자파, 표류전압, 정전기 등 위험한 환경에서 충분한 안정성과 제품의 신뢰도를 향상시킬 수 있는 신기술 착화장치 설계사양이 요구되며 자동차 에어백용 인플레이터(inflater)는 에어백에 공급하는 가스를 발생시키기 위한 초기 구성품으로 자동차의 특성상 높은 작동신뢰성 유지와 주변 환경으로부터의 안전성이 요구되어 현존하는 금속발열선형 착화장치를 대체하는 반도체브리지 착화장치 개발이 필수적인 상황이다. (중략)

  • PDF

The Naval Architectural Examination on "Pyomindaehwa" (Presumption of the Type of Drifting Ship) (표민대화(漂民對話)의 조선학적 고찰(표류선박(漂流船舶)의 선형(船型) 추정(推定)))

  • Park, Gen-Ong
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.48 no.1
    • /
    • pp.67-75
    • /
    • 2011
  • Pyomindaehwa is a study book written in Korean and it takes a form of an investigation document made up of a conversation between Chosen's castaways and an interpreter taking place in Naesirogawa and Satsuma on the south end of Kyushu, Japan in the 19th century. This book is in three volumes. Many terminologies such as timber parts, sail, rigging and equipment have been shown in the last volume, which is mainly about a repairing process of drifting ship. Especially, timber parts' terminologies including hull's term were schematized in Kumamoto Text(1854b). This study have attempted to find out Naval architectural clues helping estimate actual drifting ship's type and bulk on the evidence of the contents. Based on the studies, it is possible to presume the type of Korean boats and ships, which are similar with the ones from database of 21 traditional fishing boats in the report on Investigation of Korean fishing boats studied previously. This paper has shown the logical process of presumption of types of boats.

A Study on the Effect of Wind Force and Moment Acting on T/S HANNARA (실습선 한나라호에 작용하는 풍압력 및 풍압모우멘트 영향에 관한 연구)

  • Lee, Yun-Sok
    • Journal of Navigation and Port Research
    • /
    • v.31 no.3 s.119
    • /
    • pp.223-228
    • /
    • 2007
  • In recent trends of the enlargement and specialization, container ship, LNCG, PCC and passenger ship which have relatively large hull and superstructure above the water line, are already being operated in the world It is very important information for the safety operation of these vessels to estimate the ship's performance under the specific wind condition while berthing, unberthing or low-speed sailing. In this paper, the effect of wind force and moment acting on the training ship HANNARA is investigated by using the numerical calculations. The results of drift angle and counter rudder angle with the relative wind direction and force, the critical wind velocity with the ratio of wind velocity and ship's speed and maximum heeling angle with the wind velocity are shown The presented results can be applied directly to T/S HANNARA in berthing maneuver and avoiding typhoons, and utilized as an educational materials.

A Study on the Motion Responses and the Drift Forces of Semi-Submersible Drilling Rigs in the Damaged Condition (손상 상태에서의 반잠수식 해양구조물의 운동 응답 및 표류력에 관한 연구)

  • Park, Rho-Sik;Kim, Seong-Keun;Kim, Jong-Hyeon
    • Journal of Ocean Engineering and Technology
    • /
    • v.2 no.2
    • /
    • pp.27-36
    • /
    • 1988
  • For the purposes of drilling oil field and extracting oil deep water in more rough weather, the size of drilling rigs must be estimated. In this paper, the three dimensional source distribution method is used and we assume 10 deg. heeling and trimming condition of the drilling rig(SR-192). Also, the effects of the hydrodynamic forces which include the drift forces for field method, and the motion responses are studied with changing the incident wave direction in the assumed inclining condition. The theory and numerical codes used in this thesis appeared to be very useful for the preliminary design of drilling rigs.

  • PDF

Ship's Maneuverability & Required Number of Tug Boat in Strong Winds for the T.S. HANBADA (실습선 한바다호의 강풍시 항내 어프로칭 조선 및 예인선 사용 기준에 관한 연구)

  • Jung, Chang-Hyun;Kong, Gil-Young;Lee, Yun-Sok
    • Journal of Navigation and Port Research
    • /
    • v.32 no.8
    • /
    • pp.597-602
    • /
    • 2008
  • T.S. HANBADA has a relatively large hull and superstructures above the water line, so she has much of leeway or turning of bow with the effect of winds. Especially on berthing, unberthing and/or sailing on low speed, these effects take place more significant. Therefore, it was carried out the numerical calculation of the wind force and moments acting on the T.S. HANBADA, and then calculated the leeway angle and counter rudder angle with the relative wind direction and velocity. Also, it was suggested the maximum wind velocity which could be berthed or unberthed used by bow thruster and the tugboat operations in strong winds. These results will be great helpful to the vessels with large superstructures on ship's handling in harbour or tugboat operations.

Study on a Waypoint Tracking Algorithm for Unmanned Surface Vehicle (USV) (무인수상선을 위한 경유점 추적 제어 알고리즘에 관한 연구)

  • Son, Nam-Sun;Yoon, Hyeon-Kyu
    • Journal of Navigation and Port Research
    • /
    • v.33 no.1
    • /
    • pp.35-41
    • /
    • 2009
  • A waypoint tracking algorithm(WTA) is designed for Unmanned Surface Vehicle(USV) in which water-jet system is installed for propulsion To control the heading of USV for waypoint tracking, the steering nozzle of water-jet need, to be controlled. Firstly, target heading is calculated by using the position information of waypoints input from the land control center. Secondly, the command for the steering nozzle of water-jet is calculated in real time by using the heading and the rate-of-turn( ROT) from magnetic compass, In this study, in order to consider the drift angle due to external disturbance such as wind and wave, the course of ground( COG) can be used instead of heading at higher speed than a certain value, To test the performance of newly-designed WTA, the tests were carried out in actual sea area near Gwang-an bridge of Busan. In this paper, the sea trial test results from WTA are analyzed and compared with those from manual control and those from commercial controller.

A Study for The X-ray Image Acquisition Experiment Using by Gas Electron Multipliers (기체전자증폭기를 이용한 X-선 영상획득실험에 관한 연구)

  • 강상묵;한상효;조효성;남상희
    • Journal of Biomedical Engineering Research
    • /
    • v.24 no.2
    • /
    • pp.83-89
    • /
    • 2003
  • The gas electron multiplier placed in the drift volume of conventional gas detectors, is a conceptually simple device for producing a large gas gain by concentrating the drift electric field over a very short distance to the point that electron avalanching occurs(〉 10$^4$ V/cm), greatly increasing the number of drifting electrons. This device consists of a thin insulating foil of several tens of urn in thickness. covered on each side with a thin metal layer(Cu), with tiny holes, usually 100 ${\mu}{\textrm}{m}$ or less in diameter. and with a spacing of 100-200 ${\mu}{\textrm}{m}$ through the entire foil. perforated by using chemical etching or high-powered laser beam technique In this study, we have investigated its operating properties with various experimental conditions, and demonstrated the possibility of using this device as a digital X-ray imaging sensor, by acquiring X-ray images based on the scintillation properties of the gas electron multiplier with standard CCD camera.