• 제목/요약/키워드: 폴리우레탄 인공판막

검색결과 4건 처리시간 0.016초

응력 및 변위를 최소화하기 위한 단엽식 고분자 판막의 유한 요소 해석 (Finite Element Analysis of the Monoleaflet Polymer to Minimize Stress and Displacement)

  • 한근조;안성찬
    • 대한의용생체공학회:의공학회지
    • /
    • 제17권1호
    • /
    • pp.85-92
    • /
    • 1996
  • 병변이 있는 판막을 대체하기 위하여 사용되는 인공판막으로는 기계식 판막, 고분자 판막 등이 있는데 고분자 판막이 기계식보다 항혈전성이 우수하므로 폴리우레탄을 이용하여 많이 연구되고 있다. 고분자 판막에는 단엽식, 삼엽식, 젤리피쉬식 등으로 제작되어 연구되고 있는데 이중 단엽식 판막은 제작이 가장 간편하고 심실내 씻김현상이 실제와 유사하며 혈류의 소용돌이 현상을 감소시킨다고 보고되고 있다. 혈압 강하를 감소시키기 위하여 고분자 판막의 두께를 얇게 할때 판막이 프레임 위 정상접촉 위치로 부터 탈구현상이 발생한다. 이것을 방지하기 위하여 2개의 지지대를 설치하여 판막의 수직변위를 최소로 하는 지지대 최적위치를 구하고, 그때 판막 끝의 수평 변위 및 판막에서의 응력분포상태를 구한 결과 최적위치는 지지대에 의해 나눠지는 3영역의 폭이 각각 6.2mm, 4.7mm, 5.1mm 일때 이고, 그때 최대 처짐이 0.19mm, 수평 최대변위가 0.047mm 이고 최대 주응력이나 등가응력의 최대치는 판막이 지지대가 접착되는 부위와 비접착 부위의 불연속점에서 발생하여 이 값들은 판막 각 영역의 폭이 커지면 증가함을 알았다.

  • PDF

PIV를 이용한 인공심장용 폴리우레탄 인공판막 하류의 유동 측정 : 맥동유동실험 (PIV Measurements of Flow Downstream of Polyurethane Heart Valve Prosthesis for Artificial Heart: Pulsatile Flow Experiment)

  • 유정열;김중경;성재용;장준근;민병구
    • 대한기계학회논문집B
    • /
    • 제26권5호
    • /
    • pp.629-639
    • /
    • 2002
  • In-vitro flow characteristics downstream of a polyurethane artificial heart valve and a Bjork-Shiley Monostrut mechanical valve have been comparatively investigated in pulsatile flow using particle image velocimetry (PIV). With a triggering system and a time-delayed circuit the velocity distributions on the two perpendicular measurement planes downstream of the valves are evaluated at any given instant in conjunction with the opening behaviors of valve leaflets during a cardiac cycle. The regions of stasis and high shear stress can be found simultaneously by examining the entire view of the instantaneous velocity and Reynolds shear stress fields. It is known that high shear stress regions exist at the interface between strong axial jet flows along the wall and vortical flows in the central area distal to the valves. In addition. there are large stagnation or recirculation regions in the vicinity of the valve leaflet, where thrombus formation can be induced by accumulation of blood elements damaged in the high shear stress zones. A correlation between the unsteady flow patterns downstream of the valve and the corresponding opening postures of the polyurethane valve membrane gives useful data necessary for improved design of the frame structure and leaflet geometry of the polyurethane valve.

열림판이 지지대에 고정되지 않은 폴리우레탄 인공판막 하류의 유동장 측정 (Measurement of Flow Field Downstream of Polyurethane Artificial Heart Valve with Floating Valve Leaflet)

  • 김중경;성재용;장준근;민병구;유정열
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1998년도 추계학술대회
    • /
    • pp.247-248
    • /
    • 1998
  • The effect of unattached valve leaflet on flow field downstream of a floating and flapping polyurethane heart valve prosthesis was investigated. With a triggering system and a time-delay circuit the instantaneous velocity field downstream of the valve was measured by particle image velocimetry (PIV) in conjunction with the opening posture of a flexible valve leaflet during a cardiac cycle. Reynolds shear stress distribution was calculated from the velocity fields and wall shear stress was directly measured by hot-film anemometry (HFA). The floating motion of the valve leaflet resulted in the reduction of pressure drop and recirculating flow region downstream of the valve.

  • PDF

금속기질에 앓은 마이크로 다공질 스케폴드 코팅에 관한 연구 (Thin Micro-Porous Scaffold Layer on Metallic Substrate)

  • 신동춘;자이젱 미아오;김원철
    • 동력기계공학회지
    • /
    • 제14권5호
    • /
    • pp.41-47
    • /
    • 2010
  • 티타늄과 티타늄 합금은 재료적 특이성 때문에 심장 혈관 임플란트에서 일반적으로 사용되어 왔다. 일찍이 적용된 예로는 인공심장판막, 심박조율기의 보호케이스, 혈액 순환 장치 등이 있다. 하지만 물질유도혈전증(Material-induced thrombosis)은 혈전폐색에 의해 기인한 기능 손실로 심장혈관 임플란트 장치의 주된 합병증으로 존재하고 있으며, 심장혈관 임플란트의 혈전유전자는 심장혈관장치의 발달에 주된 난관 중 하나로 남아있다. 그리고 텍스처 혈액 접합 물질(Textured blood-contacting material)은 1960년대 초반 이후부터 혈액순환 보조 장치의 임상실험에 사용되고 있다. 접합 물질에 내장된 텍스처 섬유조직 표면은 형성, 성장, 안정적 부착, 생물학적 내벽(neointimal layer) 등 유도 혈액(entrapping blood) 성분에 의해 형성된다. 공동(cavity) 형상의 용해 가능한 미립자를 사용하는 SCPL법(Solvent casting/particulate leaching method)은 티타늄 기질 이전에 형성된 폴리우레탄 위에 텍스처(texture)를 생성하기 위해 사용되었다. 또한 콜라겐의 부동화(不動化)에 의한 공동(cavity)은 혈액 접합면에 잔존하기 위한 내피세포를 고정할 수 있는 효과가 있다. cpTi로 층화된 PU 기소공성(microporous)은 구조적 특성과 혈전증 감소를 위한 생물학적 내벽 사용의 잠재성을 평가하기 위한 세포 공동체 실험을 통해서 평가되었다.