• Applied Chemistry for Engineering
• /
• v.25 no.5
• /
• pp.526-530
• /
• 2014

Polystyrene-poly(etheramic acid) core-shell particles were prepared by dispersion polymerization of styrene using poly(etheramic acid) obtained by the reaction of 2,2'-bis[4-(3,4-dicarboxyphenoxy) phenyl]propane dianhydride and 3,5-diamniobenzoic acid as a stabilizer. 4-Vinylbenzyltrimethylammonium chloride was used as a comonomer to increase the binding efficiency of poly(etheramic acid). When the ethanol-water mixture (7 : 3) was used as a reaction medium, particles were stabilized well and the size distribution of particles was fairly narrow. The particle size increased with the amount of styrene. The particles polymerized in the dimethylformamide-water mixture had a broad size range. Polystyrene-poly(etheramic acid) core-shell particles were transformed to polystyrene-polyetherimide core-shell particles by the chemical imidization of shells.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.171-175
• /
• 1996

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.176-179
• /
• 1996

• Proceedings of the Korean Fiber Society Conference
• /
• 1991.06a
• /
• pp.27-28
• /
• 1991

• Journal of the Korean Chemical Society
• /
• v.38 no.7
• /
• pp.509-515
• /
• 1994

The interactions of 11 kinds of primary and secondary alkylammonium ions with cyclic (12C4, 15C5, 18C6, DT18C6 and DA18C6) and acyclic$(Q_2O_5)$ polyethers were investigated by NMR titration and conductometry. All of the alkylammonium ions under investigation form the relatively stable 1 : 1 complexes with crown ethers and acyclic polyether by H-bond. The interactions of alkylammonium ions with analogeous hosts having different size were in the order of 18C6 > 15C5 > 12C4, and the strengthes of donor atoms toward the alkylammonium ions were in the order of N > O > S. 18C6 forms more favorable interactions with primary alkylammonium ions than secondary alkylammonium ions, otherwise DA18C6 shows the opposite behaviors. The stability constants for complexations of 18C6 with the alkylammonium ions were determined conductometrically in methanol at 25$^{\circ}C$. The major factors affecting the stability of complexes were the type of alkylammonium ions, the length of alkyl-chain and the steric hindrance due to the structure of alkyl groups on complexation.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.772-779
• /
• 2000

The friction and wear behavior of short carbon fiber reinforced polyetheretherketone was studied experimentally under dry sliding conditions against SCM440(AISI 4140) disks with a different surface roughness and hardness at the low sliding speeds and the high pressures on a pin-on-disk apparatus. Under the low disk surface roughness value the earsplitting noise and stick-slip were occurred. The increased adhesion friction and wear factor with stick-slip made the friction and wear behavior worse. Under the high disk surface hardness the break and falling-off of carbon fibers were accelerated. The carbon fibers fallen off from the matrix were ground into powder between two wear surfaces and this phenomenon caused a abrasive friction and wear factor to increase. So the friction and wear behavior became worse. With the transfer film made of wear particles formed on a disk, the carbon powder film formed on a pin lowered a friction coefficient.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.1
• /
• pp.17-23
• /
• 2017

Polyether ether ketone (PEEK) composite including tungstophosphoric acid(TPA) membranes have been intensively investigated for polymer electrolyte membrane water electrolysis (PEMWE) and thus covalently linked sulfonated polyether ether ketone (CL-SPEEK) with captured TPA composite membranes were prepared and characterized. Sulfonated polyether ether ketone (SPEEK) was prepared in sulfonation of PEEK and was cross-linked with 1,4 diiodobutane. The carbonyl group of SPEEK was reduced with $NaBH_4$ and 3-isocyanatepropyltriethoxysilane (ICPTES) was added. The TPA captured composite was prepared in reaction of TPA with 3-mercaptopropyltrime thoxysilane (MPTMS). The polymer composite membranes showed better thermostability and electrochemical properties than SPEEK. The membranes were prepared by sol-gel casting method. The polymer composite membrane featured 0.1285 S/cm of proton conductivity at $80^{\circ}C$ and outstanding durability.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.4
• /
• pp.338-344
• /
• 2017

Polyoxometal molybdophosphoric acid (MoPA) bonded polyether ether ketone (PEEK) composite membrane for water electrolysis has been investigated. The composited membrane, covalently cross linked (CL) sulfonated polyether ether ketone (SPEEK) with a bonded MoPA, was prepared in sulfonation of PEEK, cross linkage reaction with 1,4-diiodobutane, and addition with MoPA. PEEK was covalently cross-linked with 1,4-diiodobutane to improve mechanical strength and was added with MoPA to increase proton conductivity. MoPA should be fixed to back bone of SPEEK to prevent bleeding out. Therefore, the carbonyl group of SPEEK was reduced with NaBH4 and 3-isocyanatepropyltriethoxysilane (ICPTES) was added. The MoPA bonded composite was produced in the reaction of MoPA with 3-mercaptopropyltrimethoxvsilane (MPTMS). In conclusion, MoPA bonded CL-SPEEK composite membrane featured 0.129 S/cm of proton conductivity at $80^{\circ}C$, and 2,156 hours of chemical stability in Fenton test. These properties are better than those of membranes of other SPEEK system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.5
• /
• pp.478-484
• /
• 2016

Polyether ether ketone (PEEK) composite membranes have been intensively investigated for polymer electrolyte membrane water electrolysis (PEMWE). Covalently linked (CL) sulfonated polyether ether ketone (SPEEK) and cellulose polymer composite membranes were prepared and characterized. Polyether ether ketone (PEEK) and cellulose were sulfonated and then were covalently linked by 1,4-diiodobutane to produce covalently linked SPEEK and cellulose polymer composite membranes. The composite membranes showed better thermostability and electrochemical properties than SPEEK. The membranes were prepared by sol-gel casting method. CL-SPEEK/Cellulose composite membrane featured 0.2453 S/cm of proton conductivity at $80^{\circ}C$ which was better than that of Nafion.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.45-51
• /
• 2015

PBDEs (polybrominated diphenyl ehters) are rarely dissolved in water due to their strong hydrophobicity and large molecular mass so not many researches were done in aqueous environment compared to other environmental compartments. However, the mass loading from wastewater treatment plant into aquatic environment, re-suspension from bottom sediment and partitioning from floating particles and colloids may not be negligible. It is, therefore, important but also difficult to investigate PBDEs in water environment. Recent overcoming resolution towards this barrier to monitor hydrophobic organic compounds in aquatic environment is using passive sampling technique like semipermeable membrane device. By using passive sampling, it might be possible to obtain long-term reproducible monitoring result and detect the trace amounts of PBDEs, with controlling fluctuation of surrounding environmental factors during the sampling event. So therefore, this study is purposed to confirm the possibility of using SPMD (semi-permeable membrane device) as water monitoring tool. Grab samples, composite samples and SPMDs were applied in river bank to evaluate the concentration difference and temporal fluctuation by various water sampling method, and to assess the water concentration prediction capability of SPMD for the PBDEs.