• Clean Technology
• /
• v.11 no.3
• /
• pp.141-146
• /
• 2005

The composite membranes were made by grafting using supercritical carbon dioxide (scCO2) impregnation and polymerization procedures. The membranes were synthesized by changing amount of monomer. The polypropylene grafted polystyrene sulfonic acid (PP-g-pssa) membranes were characterized with various methods. The morphology and structure of PP-g-pssa membranes were analyzed with scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). As amount of monomer was increased, ion conductivity, cell performance was increased and methanol permeability was decreased. However PP-g-pssa membranes with 1.5g monomer and over had similar values of methanol permeability, ion conductivity and cell performance.

• The Korean Journal of Rheology
• /
• v.3 no.1
• /
• pp.38-46
• /
• 1991

저분자량(분자량: 1.04$\times$104 g/mole)과 고분자량(3.84$\times$106) 폴리스타이렌 브렌드를 제조하고 무접촉 무마찰을 이용한 비틀림 크립장치를 사용하여 점도, 크립 캄플라이언스들 을 측정하고 또 지연 스펙트라도 계산해 내었다. 고분자량의 농도는 0, 2, 10, 20, 50, 70, 100 중량 퍼센트였다. 점도는 블렌드의 중량평균 분자량이 임계분자량이상이면 중량평균의 3.5승에 비례했다. 중량평균 분자량>임계분자량 인블렌드의 경우 정상상태 회복 캄플라이언 스는 중량평균의 3.5승에 비례했다. 중량평균 분자량>임계분자량 인 블렌드의 경우 정상상 태 회복 캄플라이언스는 중량평균의 -2.3승에 비례했다. 지연스펙트라를 검토한 결과 폴리 스타이렌의 임계분자량은 38000 g/mole 쯤으로 추정되었다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.6
• /
• pp.305-311
• /
• 2004

Charge transport phenomena of polyaniline-DBSA/High Impact Polystyrene (PAM-DBSA/HIPS) blends have been studied through an examination of electrical conduction. HIPS used host polymer in the blends and PANI-DBSA obey a space charge limited conduction mechanism and a ohmic conduction mechanism respectively. However, PANI-DBSA/HIPS blends do not obey any classical conduction mechanism. Analysis of conduction mechanism revealed that the charging current of PANI-DBSA/HIPS blends increased with the increase of PANI-DBSA content. This result migrlt be explained by the reduction in the distance between PANI-DBSA particles enabling the charge carriers to migrate from a chain to a neighboring chain via hopping or micro tunneling. It was also found that the charging current of PANI-DBSA/HIPS blends decreased as the temperature was elevated, which is of typical phenomena in metals. It is speculated that the charge transport in PANI-DBSA particle was somewhat constrained due to strong phonon scattering.

• Clean Technology
• /
• v.16 no.1
• /
• pp.26-32
• /
• 2010

The low temperature pyrolysis of polypropylene (PP), polystyrene (PS) and polypropylene-polystyrene (PP-PS) mixture in a batch reactor at the atmospheric pressure and $450^{\circ}C$ was conducted to investigate the synergy effect of PP-PS mixture on the yield of pyrolytic oil. The pyrolysis time was varied from 20 to 80 mins. The products formed during pyrolysis were classified into gas, gasoline, kerosene, gas oil and heavy oil according to the petroleum product quality standard of Ministry of Knowledge Economy. The analysis of the product oils by GC/MS(Gas chromatography/Mass spectrometry) showed that new components were not detected by mixing of PP and PS. There was no synergy effect according to the mixing of PP and PS. Conversions and yields of PP-PS mixtures were linearly dependent on the mixing ratio of samples except for heavy oil yields. Heavy oil yields showed almost constant regardless of the mixing ratio.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.2
• /
• pp.16-24
• /
• 1990

아세틸화(化) 고분자(高分子) 축합(縮合)탄닌의 젤침투 크로마토그래피 분석(分析)을 위해 일반적(一般的)으로 사용(使用)되고 있는 폴리스타이렌 표준물질(標準物質)은 부정확(不正確)한 교정(矯正)값을 준다. 한편 유도체화 하지않은 축합탄닌의 젤침투 크로마토그래피는 폴리스타이렌 디비닐벤젠 코폴리머 컬럼과 디메틸 포름아미드를 용매(溶媒)로 사용(使用)하여 매우 만족스럽게 분석(分析)될 수 있었다. 그 컬럼의 교정은 유도처리 되지않은 고분자(高分子) 축합(縮合)탄닌을 이용(利用)하여 수행되었으며 고분자 탄닌을 유도처리 할 필요가 없으므로 탄닌의 신속한 분자량(分子量) 결정(決定)이 가능하고 컬럼 크로마토그래피로 분리(分離)되어지는 탄닌을 연속적으로 분석(分析)할 수 있는 장점(長點)을 가진다.

• Polymer Science and Technology
• /
• v.8 no.1
• /
• pp.4-11
• /
• 1997

• Polymer Science and Technology
• /
• v.13 no.3
• /
• pp.384-392
• /
• 2002

• Proceedings of the Membrane Society of Korea Conference
• /
• 2001.11a
• /
• pp.93-95
• /
• 2001

• Elastomers and Composites
• /
• v.44 no.1
• /
• pp.34-40
• /
• 2009

New coupling agent or surface modified agent (9-decenoic acid) was used to enhance the compatibility between silica and polystyrene in silica/polystyrene hybrid nanocomposite, synthesized by in situ miniemulsion polymerization. Composites contain well dispersed nanosize silica particles. Related tests and analyses confirmed the success of synthesis. Functionalization of silica by 9-decenoic acid and silica on the polystyrene was confirmed by FTIR. TGA showed presence and amount of silica in final latex. The glass transition temperature of the hybrid nanocomposite was increased with the silica amount. SEM and TEM analysis showed the spherical morphology of PS and composite with an average diameter of 55 nm. The presence of silica within composite was confirmed by EDS attached to the existing TEM.

• Clean Technology
• /
• v.14 no.1
• /
• pp.35-39
• /
• 2008

In this study, we successfully fabricated a super-hydrophobic polymer layer on the surface of slide glass using the solubility difference of a polymer at two different solvents. After dissolving polystyrene (PS) resins in tetrahydrofuran (THF) as a good solvent and then adding ethanol(EtOH) as a poor solvent, we were able to fabricate super-hydrophobic surface. We also investigated the effect of EtOH addition, coating methods, solution mixing time and speed, and other alcohols on the surface hydrophobicity. The water contact angle (WCA) of the fabricated surface revealed $WCA>150^{\circ}$ and the microporous surface structure composed of microparticles with the size less than $5\;{\mu}m$.