• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.152-159
• /
• 2013

Experiments of emulsion particles state of using polyglycerol ester emulsifier and the stability in accordance with the change of time were conducted using several oil. Experimental results confirmed that there is little difference in the stability and particle size depending on the type of oil. Most stable oil with polyglycerol ester is polar oil of silicon series and fatty acid ester oil, hydrocarbon oil of the nonpolar oil (Mineral oil, squalane, polydecene) was the most unstable state. And vegetable oils showed the stable form of particles with polyglycerol ester emulsifier.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1443-1459
• /
• 2019

Polyglycerol fatty acid ester nonionic surfactants have been used for a long time in foods and have been suggested as an alternative to the safety problems of PEG based nonionic surfactants. The polyglycerol fatty acid ester surfactants are synthesized by combining a hydrophilic polyglycerin and a lipophilic fatty acid. The hydrophilic polyglycerin is polymerized using glycerin, glycidol, epichlorohydrin, etc. The main issues of the polyglycerol polymerization reaction are to increase the content of the polyglycerol in the form of linear rather than branched or cyclic forms and to narrow the distribution of the degree of polymerization. The method of binding a lipophilic fatty acid group to a hydrophilic polyglycerin includes chemical synthesis such as esterification reaction and enzyme synthesis using lipase enzyme. The main issues of polyglycerin fatty acid ester synthesis are to increase the yield and to control the degree of esterification while reducing side reactions.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.2
• /
• pp.113-119
• /
• 2015

The measurement of hydration level in the surface layer of the skin, stratum corneum (SC), gives important information on the biophysical properties and function of the skin barrier such as softness, flexibility, and healthiness of the skin. But it is difficult to measure a consistent hydration level from a sample to another sample due to individual variations and environmental changes. The aim of this study was to evaluate objective hydration after using various products in the SC. The SC Hydration was measured by capacitance (Corneometer$^{(R)}$, C+K, Germany) on the ventral site of forearm from 40 healthy volunteers. The skin surface was chronologically measured immediately after application of the test products and 3 and 6 hours later. We analyzed the averages of five measurements of each site and used the hydration increase rate for correction on untreated site variation. We found that most polyols including glycerol and butylenes glycol influenced directly the hydration increase rate in the SC previously. In this study, glycerol was used to prepare the standard products from 0 to 20 percents and applied to the same volunteers. The individual standard curve showed linear relation to glycerol concentrations. Based on the the standard curve, hydration of SC was converted into hydration increase rate to glycerol concentrations. The converted glycerol concentrations of products were repetitive and reproducible. In addition, the individual standard curve was used to relate the skin type of each individual. These results suggest that the hydration of the SC standardized regardless of external variation and individual skin condition can explain detailed skin state variation. Further studies will be conducted with other ingredients such as surfactants, lipids and aqueous materials, and with other methods for noninvasive measurement.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.2
• /
• pp.165-174
• /
• 2017

This study reports a synthesis of an amphiphilic linear block copolymer consisting of a hydrophobic poly (lactide) (PLA) block and a hydrophilic hyperbranched polyglycerol (hbPG) block, PLA-b-hbPG. Simple chemical modification of the hbPG block with 4-hydroxycinnamic acid (CA) led to a photo-crosslinkable block copolymer, PLA-b-hbPG-CA. Nanosized micelles of the block copolyemrs were used as drug carriers for sustainable release. The hbPG shell made of a small molecular weight hbPG block showed excellent hydrophilicity, which can minimize in vivo toxicity. The UV-crosslinked PLA-b-hbPG-CA micelles loaded with drugs colud be served as a drug delivery carrier for its biocompatibility and self-assembled structures.

• Clean Technology
• /
• v.24 no.2
• /
• pp.112-118
• /
• 2018

Thermo-responsive polymers that exhibit phase transition in response to temperature change can be used as materials for smart windows because they can control solar light transmission depending on the outside temperature. The development of thermo-responsive polymers for smart windows that can be used over a wide temperature range is desirable. To obtain high performance smart windows materials, three-dimensional thermo-responsive poly(N-isopropylacrylamide) (PNIPAm) gels were prepared by free radical polymerization from monomer N-isopropylacrylamide, N, N'-methylenebis acrylamide (MBAm) as a crosslinking agent, ammonium persulfate (APS) as a strong oxidizing agent/tetramethylene diamine as a catalyst, and a mixture of two solvents (water/glycerol). This study examined the effect of glycerol content on the lower critical solution temperature (LCST), freezing temperature and the solar light transmittance of crosslinked PNIPAm gel films. The LCST and freezing temperature of PNIPAm gel films were found to be significantly decreased from 34.3 and $6.3^{\circ}C$ to 28.2 and $-6.5^{\circ}C$ with increasing glycerol content from 0 wt% to 10 wt%, respectively. It was found that the transparent PNIPAm gel films at $25^{\circ}C$ (temperature < LCST) were converted to translucent gels at higher temperature ($45^{\circ}C$) (temperature > LCST). These results suggested that the crosslinked PNIPAm gel materials prepared in this study could have high potential for application in smart glass materials.

• Clinical and Experimental Pediatrics
• /
• v.48 no.4
• /
• pp.425-432
• /
• 2005

Purpose : Polyglutamine diseases are a group of diseases caused by the expansion of a polyglutamine tract in the protein. The present study was performed to verify if polyglutamine disease transgenic Drosophila models show similar dysfunctions as are seen in human patients. Methods : Polyglutamine disease transgenic Drosophila were tested for their climbing ability. And using genetic methods, the effects of anti-apoptotic gene bcl-2 and chemical chaperones on neurodegeneration were observed. Also, spinocerebellar ataxia 2 (SCA2) transgenic Drosophila lines were generated for future studies. Results : Expanded forms of spinocerebellar ataxia 3 (SCA3) transgenic protein causes characteristic locomotor dysfunction when expressed in the nervous system of Drosophila but the anti-apoptotic gene bcl-2 shows no evidence of ameliorating the deleterious effect of the expanded protein. However, Glycerol, a chemical chaperone, seemed to reduce the toxicity, at least in the eyes of the transgenic flies. The level SCA2 expression is too weak in the transgenic SCA2 Drosophila for evaluation. Conclusion : SCA3 transgenic Drosophila show ataxic behavior as observed in human patients. Chemical chaperones such as glycerol may prove beneficial in this class of genetic disease, which has no current method of cure.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.434-447
• /
• 2019

Polyethylene glycol (PEG) is widely used in cosmetics as a surfactant, detergent and emulsifier. During the manufacturing process, 1,4-dioxane, which is toxic to humans, can be produced as a by-product by dimerization of ethylene oxide. As consumers' interest in cosmetic ingredients has increased, the need for safe emulsion research without PEG ingredients in the personal care market has increased. With increasing consumer interest in cosmetic ingredients, the need for safer emulsion research without the PEG ingredient in the personal care market has increased. In this study, we aimed to develop and stabilize nanoemulsion formulation without PEG. Response Surface Methodology (RSM) was used to develop optimized nanoemulsion formulations. Surfactant content (2~4%), oil content (4~8%) and polyol content (12~24%) were set as independent variables as a result of preliminary experiments for determining independent variables and ranges. The particle size, zeta potential, turbidity, and polydispersity index of the formulation were measured as response variables. As a result of measurement of the prepared nanoemulsion by FIB (Focused ion beam), spherical particles were found to have a size distribution of 100 to 200 nm. The stability of each formulation was evaluated for 30 days at each temperature ($4^{\circ}C$, $25^{\circ}C$, and $45^{\circ}C$). The optimal formulation considering the optimum particle size, turbidity, polydispersity index and zeta potential was found to be surfactant (2%), oil (8%) and polyol (24%).

• Journal of the Korean Applied Science and Technology
• /
• v.9 no.2
• /
• pp.107-117
• /
• 1992

The synthesis and solution properties of polyglycerol alkyl ether($R_{12}Gn$) are described. The phase behavior, surface tension, cloud point and HLB value of polyglycerol dodecyl ether in aqueous solution and in mixed solution of surfactant /water /oil have been investigated and compared with values of polyoxyethylene dodecyl ether. The surface tension showed that $R_{12}Gn$ have sufficiently low values of surface tension and cmc to serve as useful polyoxyethylene alkyl ether. The mesophases appearing in the $R_{12}Gn$ systems were more stable in a high temperature range than the mesophases of polyoxyethylene alkyl ether systems. The cloud point and HLB data indicated that addition of one glycerol group was equivalent to the addition of three oxyethylene group units, as far as the hydrophilic property was concerned. The phase diagrams of the polyglycerol alkyl ether /dodecane /water systems showed that the solubilizing and emulsifying powers of $R_{12}Gn$ were greater than those of polyoxyethylene alkyl ether. It is concluded that the polyglycerol chain can be even more useful as hydrophilic group of nonionic surfactants than the polyoxyethylene chain.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.100-107
• /
• 2015

Prepared polyurethane resin for vegetable leather coating on surface was synthesized with glycerol which had different mole ratio. Mechanical properties of the synthesized polyurethane resin were measured by the SEM, FT-IR, UTM. Growing concerns in the evnironment-friendly polymer resin, we have synthesized low late obtained solvent water dispersion resin to be coating on vegetable leather. The increase of aliphatic trihydric alcohol glycerol mole %, abrasion resistance and tensile strength had highly stronger in intensity and longer durability. On the contrary, demonstrated reduce properties of elongation and flexibility. In the result of toluene solvent resistance, there was no effect of increased or decreased by the ratio of glycerol mole %.

• Clean Technology
• /
• v.29 no.1
• /
• pp.10-21
• /
• 2023

Hydrogels that are made of natural polymer-based double networks have excellent biocompatibility, low cytotoxicity, and high water content, assuring that the material has the properties required for a variety of biomedical applications. However, hydrogels also have limitations due to their relatively weak mechanical properties. In this study, hydrogels based on an alginate di-aldehyde (ADA) and gelatin (Gel) double network that is reinforced with additional hydrogen bonds formed between the hydroxyl (-OH) groups of the hyperbranched polymer (HPG) and the functional groups present inside of the hydrogels were successfully synthesized. The enhanced mechanical properties of these synthesized hydrogels were evaluated by varying the amount of HPG added during the hydrogel synthesis from 0 to 25%. In addition, magnetite nanoparticles (Fe₃O₄ NPs) were synthesized within the hydrogels and the structures and the magnetic properties of the hydrogels were also characterized. The hydrogels that contained 15% HPG and Fe₃O₄ NPs exhibited superparamagnetic behaviors with a saturation magnetization value of 3.8 emu g^-1. These particular hydrogels also had strengthened mechanical properties with a maximum compressive stress of 1.1 MPa at a strain of 67.4%. Magnetic hydrogels made with natural polymer-based double networks provide improved mechanical properties and have a significant potential for drug delivery and biomaterial application.