• The korean journal of orthodontics
• /
• v.37 no.1 s.120
• /
• pp.65-72
• /
• 2007

Objective: This study was performed to investigate the influences of extraction and nonextraction treatment on smile esthetics by measuring dental arch width changes. Methods: Pretreatment and posttreatment study models of 30 first premolar extraction cases and 30 nonextraction cases were randomly selected to determine whether extraction treatment results in narrow dental arches, and a consequent unaesthetic smile. Arch widths were measured from the cusp tips of the canines and the first molars. Posterior arch widths were also measured at a constant arch depth derived by averaging randomly chosen nonextraction models. Results: The intercanine widths increased significantly in the extraction sample, whereas the intermolar widths decreased significantly. The arch width at a standardized arch depth was significantly wider in the extraction subjects. Conclusion: These results elucidate that constriction in arch width is not a materialized consequence of extraction treatment. It leads to postulate that an esthetically compromising effect from narrow dental arches on smile is hardly anticipated with extraction treatment.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.717-729
• /
• 1998

This study was done to estimate arch forms and dimensions at the bracket level where archwire was placed in Angle's Class I first premolars extraction cases. 60 post-treatment dental casts which had attained good orthodontic treatment results were used in this study Many landmarks and linear measurement items to describe arch forms and dimensions were determined and measured. With a computer system and digitizer, arch forms were described and linear measurement items were statistically analysed. The following results were obtained. 1. The average labial and lingual arch forms at the bracket level were obtained. 2. Arch forms were expressed by parabolic equations and coefficients of determination. 3. Arch widths were larger in male than in female. 4. There were statistical significances in upper intercanine width, upper interfirst molar width, upper intersecond molar height, lower intercanine width and lower interfirst molar width between both sexes (p<0.05, p<0.01). 5. Interfirst molar width differences between maxilla and mandible were 6.43mm in male and 6.05mm in female.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.2
• /
• pp.139-144
• /
• 2012

The purpose of this study was to evaluate the accuracy and reproducibility of measuring the size of unerupted permanent tooth via cone beam computed tomography(CBCT). Ten children were scanned with dental CBCT, and 3-dimensional reconstruction of the dentitions were generated CBCT. Mesio-distal dimension and buccolingual dimension of the teeth were made directly on the model with a high-precision digitalcaliper and on the CBCT by using three-dimensional dental imaging software. Reliability and accuracy were assessed by using intraclass correlation and paired $t$-tests. ($p$ <0.05) The results were as follows : 1. Intraclass correlations were above 0.9 for Both the CBCT and the model measurements, showinghigh reliability. 2. Although there were high correlation values(r=0.91) between CBCT and model messurement methods, comparisons between the CBCT and model messurement methods showed a statistically significant difference($p$ <0.05). 3. The CBCT measurements tended to slightly underestimate by 0.2 mm. But, the systematic difference of CBCT measurements were clinically acceptable Therefore, CBCT measurement method can be used to measure the size of unerupted teeth in a sufficiently accurate way.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.510-521
• /
• 2006

This investigation was undertaken to examine the extent to which tooth size and arch dimension each contribute to dental crowding. The sample included 50 subjects with well aligned dentition (25 males, 25 females) and those of 40 subjects with gross dental crowding(20 males, 20 females). Plaster model and digital model made from alginate impression taken at the one visit. Tooth size, arch length, arch perimeter, intercanine width and intermolar width was measured on the plaster and digital models. The findings in this study lead to the following conclusions. 1. In maxilla, the mesiodistal diameters of lateral incisor and premolars of the crowded group were significantly larger than those of the normal occlusion group (P<0.05). 2. In mandible, the mesiodistal diameters of central incisor, canine and premolars of crowded group were significantly larger than those of the normal occlusion group (P<0.05). 3. In maxilla, arch perimeter and intermolar width of crowded group were significantly smaller than normal occlusion group but intercanine width of crowded group were larger than normal occlusion group (P<0.05). There was no significantly difference in arch length (P>0.05). 4. In mandible, arch perimeter of crowded group was smaller than normal occlusion group(P<0.05). There were no difference in arch length intermolar width and intercanine width (P>0.05) 5. In the analysis of correlation coefficients of arch length discrepancy with variables, arch perimeter, intermolar width and mesiodistal width of 2nd premolar showed positive correlations in maxilla. 6. There was a significant difference between tooth width measurements made by the 2 methods, with all the digital model measurement larger than plaster model measurements (P<0.05) : the magnitude of the differences does not appear to be clinically relevant. 7. In the analysis for reproducibility, the plaster model measurement was showed lower degree of correlation between 1st and 2nd measurement than digital model.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.447-451
• /
• 1995

The purpose of this study was to investigate the effects of cleft on mesiodistal dimensions of permanent teeth in unilateral cleft lip and palate patients. Mesiodistal dimensions of permanent teeth were measured to the nearest 0.01mm on plaster models of 50 subjects with unilateral complete cleft lip and palate, 10 siblings and 50 Controls. The results were as follows : 1. Tooth size discrepancy in the cleft group was significant in all regions except maxillary cuspid, mandibular cuspid and mandibular first premolar. 2. Some of the mesiodistal dimensions of the teeth on the cleft side were significantly smaller than those of their antimeres on the non-cleft side in the cleft group. 3. A comparison of mesiodistal dimensions of the teeth for the right and left sides of the control group showed no statisically significant differences excepts maxillary lateral incisor. 4. Asymmetries of mesiodistal dimensions of the teeth in the sibling group was not found except maxillary first molar.

• The korean journal of orthodontics
• /
• v.32 no.2 s.91
• /
• pp.117-127
• /
• 2002

The purpose of this study was to compare the arch width of the hyperdivergent group with that of the neutral group in Class III malocclusion based on the vertical patterns and to compare the arch width of Class III neutral group With that of normal occlusion group based on sagittal patterns. The subjects consisted of 118 pairs of studty casts, divided into three groups , 37 Class III hyperdivergent group(18 males and 19 females, SN-Mn plane angle>39.5$^{\circ}$), 40 Class III neutral group(20 males and 20 females, SN-Mn plane angle : 32 ${\pm}$ 2.5$^{\circ}$) and 41 Class I normal occlusion group(20 males and 21 females). The intercanine, interpremolar, and intermolar width of the maxillary and mandibular study casts were measured, then the ratios of dental width to basal width and mandibular width to maxillary width were obtained. Basal arch width and dental arch width were measured to obtain the pure basal arch relation in transverse plane as ruled out the transverse dental compensation. The results were as follows 1. There were no significant differences in any ratios between Class III hyperdivergent group and Class III neutral group as different vertical pattern. 2. As the ratios of dental arch width to basal arch width between normal occlusion group and Class III neutral group were compared, the maxillary teeth flared buccally to the basal bone, and the mandibular teeth tilted lingually to the basal bone in Class III neutral group. 3. The ratios of mandibular arch width to maxillary arch width in basal arch level were significantly different in all regions. Maxillary basal arch width of Class III neutral group was narrower than that of normal occlusion group. 4. The ratios of mandibular arch width to maxillary arch width in teeth level were not significantly different between normal occlusion group and Class III neutral group. In spite of discrepancies of maxillary and mandibular basal arch width, the dental arch width of Class III malocclusion group compensated very well. At the presurgical orthodontic treatment in clinic, it would not be desirable to decompensate for compensated dental arch width too much, for obtaining an appropriate arch compatibility and good results for orthognathic surgery.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.2
• /
• pp.225-234
• /
• 2018

The purpose of this study was to analyze the ratio and rate of apical closure when inducing root growth of necrotic immature permanent teeth using alternative triple antibiotics. 24 permanent teeth in the treatment group and 27 premolars in the control group were retrospectively studied using periapical radiographs for more than 300 days after the first visit. The difference in the growth rate between the two groups was statistically compared using the Mann-Whitney test at a significance level of 0.05. There were no statistically significant differences between the two groups in the first month and during months 1 - 3, 3 - 6, and 6 - 12. After 12 months, the cumulative rate of decrease in the apical foramen width in the treatment group was 50.59% and that in the control group was 71.82%, which revealed a significant difference between the two groups. There were significant differences in the rates of decrease in the apical foramen width after 3, 6 months, and later period in the treatment group, respectively. The cumulative rate of increase in the root dentin area presented no statistically significant differences between the treatment group and control group during the entire period of examination.

• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.43-52
• /
• 2000

Hemifacial microsomia ( HFM ) is the second most common craniofacial abnormalies. HFM represnted a spectrum of clinical findings such as hypoplasia of the mandibular ramus and condyle, confinement of maxilla growth, external and/or middle ear defects, involvement of some cranial suture, buccal soft tissue, facial nerve, and muscles in the affected side. HFM often showed progressive facial asymmetry and occlusal plane slanting to the affected side with growth. There were several reports about asymmetry of tooth maturation, hypodontia, delayed eruption, enamel hypoplasia in HFM. Since teeth develope in close association with size and morphology of the maxillary and the mandible, it is highly likely that dental changes will be present in HFM. So the Purpose of this study was to investigate the differences of the primary and the permanent teeth dimensions in the maxillary and the mandibular dentition between the affected and the non-affected side of HFM.. The sample of this study consisted of 34 unilateral HFM Patients (18 males and 16 females, average age : 5 year 11 months old). The authors examined the mesiodistal and the faciolingual dimensions of the primary and the permanent teeth and performed statistical study by using paired t-test. The results were as follows 1. The mesiodistal dimensions of the mandibular second primary molar and the mandibular first permanent molar in the affected side of HFM were significantly smaller than those of non-affected side. But there were no significant differences in the anterior teeth and the mandibular first primary molar. It means that a gradient of severity from anterior teeth to posterior teeth was found in the mandibular dentition. 2. Although there were no significant differences in the faciolingual dimensions of the primary and the permanent teeth in the maxillary and the mandibular dentition between the affected and non-affected side of HFM, there were general trend of compensatory increase in faciolingual dimension of the mandibular primary and the permanent teeth in the affected side Therefore these results showed that HFM might affect on the abnormality of tooth dimension, especially the most posterior teeth, in the affected side of the mandible.

• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.467-477
• /
• 2001

This investigation was designed to determine the effects of wire size, bracket width and the number of bracket on bracket-wire dynamic frictional resistance during simulating arch wire-guided tooth movement in vitro. For simulation of an arch wire-guided tooth movement, we simulated tooth, periodontal ligament and cancellous bone. Maxillary premolar and 1st molar were simulated as real sized resin teeth, the simulated resin teeth which its root was coated by polyether impression material which its elastic modulus is similar to periodontal ligament were embedded in steel housing with inlay wax which its elastic modulus is similar to cancellous bone. Stainless steel wires in four wire size (0.016, 0.018, $0.016\;{\times}\;0.022,\;0.019\;{\times}\;0.025$ inch) were examined with respect to three (stainless steel) bracket widths (2.4, 3.0, 4.3mm) and the number of medium bracket(one, two, three) included in the experimental assembly under dry condition. The wires were ligated into the brackets with elastomeric module. The results were as follows : 1. In all the brackets, frictional resistance increased with increase in wire size. But, statistically similar levels of frictional resistance were observed between 0.018 inch and $0.016\;{\times}\;0.022$ inch wires in narrow bracket and also between 0.016 inch and 0.018 inch wire in wide backet. 2. The frictional forces produced by 0.016 inch wire were statistically similar levels in all the brackets. In 0.018 inch round wire, wide bracket was associated with lower amounts of friction than both narrow and medium brackets. In $0.016\;{\times}\;0.022,\;0.019\;{\times}\;0.025$ inch rectangular wire, wide bracket produced target friction than both narrow and medium brackets. In all the wirer, narrow and medium bracket demonstrated no statistical difference in levels of frictional resistance. 3. Frictional resistance increased with increase In number of medium bracket. 0.016 inch round wire demonstrated the greatest increment in frictional resistance, followed by $0.019\;{\times}\;0.025,\;0.016\;{\times}\;0.022$ inch rectangular wire which were similar level in increment of frictional resistance, 0.018 inch wire demonstrated the least increment. The increments of frictional resistance were not constantly direct proportion to number of bracket.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.197-202
• /
• 2013

The purpose of this study was to examine the relationship between the physique of 147 dental hygiene students and the size of their dental arch. A survey was conducted, and impression taking was carried out at the same time to measure the arch length and width of the students. The findings of the study were as follows: 1. 74.8 percent of the students got a dental checkup over the past year. 86.4 percent breathed through the nose. 18.4 percent had ever received orthodontic treatment, and 49.7 percent had ever had their tooth extracted. 94.6 percent were fond of refined food, and 52.4 percent had a liking for hard food. 2. There were no statistically significant differences in arch length and width according to all the variables that related the size of dental arch. 3. Out of the physique variables, weight was identified as a variable to make a statistically significant difference to arch length and width. A heavier weight led to larger mandibular inter-canine width and larger maxillary inter-molar width. 4, A heavier weight had a weaker positive correlation to inter-canine width and inter-molar width. Arch length and width were most closely linked to maxillary inter-molar width and mandibular inter-molar width. The above-mentioned findings show that weight exerted an influence on the form of dental arch among the physique variables. In the future, sustained research efforts should be made to keep track of the relationship between the change of physique and the change of dental arch to improve the stability of occlusion and promote oral health.