• Journal of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.170-175
• /
• 1984

The transport rates of $H^+$ ion by DBC and DCC as carrier molecules through organic liquid membranes were determined at 25$^{\circ}$C. The transport rates depend highly on the dielectric constants of membrane solvents and these results were discussed in terms of Born's potential energy barrier methods. The sizes of anions also affect the transport rates and these results were well explained theoreticlly by extended Born's equation.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.160.2-160.2
• /
• 2012

Unified State Model(이후 USM)은 Altman(1972)에 의해 처음 제안된 이후 Chodas(1981), Raol & Sinha(1985), Vittaldev et al.(2012) 등을 거치며 연구 발전되어 왔다. 이 모델은 공간상 6개 성분의 위치, 속도 벡터를 이용해 위성의 운동을 기술하는 기존 계산 방법과 달리 4개의 Quaternion 변수를 도입하여 위성의 위치를, 3개의 Hodograph 변수를 도입하여 위성의 속도를 각각 기술한다. USM의 장점은 직교좌표계로 표현된 위성의 위치, 속도 변수에 비해 USM 변수의 변화량이 상대적으로 작기 때문에 수치 계산 시 계산의 안정도가 높다. 또한 원궤도(${\omega}$ : undefined)와 적도면 궤도(i = 0, ${\Omega}$ : undefined) 계산 시에 나타나는 특이성(singularity) 문제가 발생하지 않는다. 본 연구에서는 USM 계산방법과 기존 방법에 의한 위성궤도 계산결과의 차이를 비교 분석하였다. 지구궤도 위성의 정밀계산을 위해 이체항 이외에 지구타원체 섭동항과 대기 항력에 의한 섭동항을 추가 적용하였다. 비구형 지구 중력 포텐셜에 의한 섭동은 J4항까지 고려하였으며, 대기 항력은 간단한 exponential 모델을 적용하였다. 또한 수치계산 시 적분 간격과 정밀도 차수를 조절하여 각 모델의 계산 안정성을 테스트하였다. 본 연구의 궤도계산 결과 USM 모델을 이용한 계산방법은 그 정밀성과 계산효율성이 매우 우수한 것으로 검증되었다.

• Journal of Bio-Environment Control
• /
• v.6 no.4
• /
• pp.292-298
• /
• 1997

These studies were conducted to verify the effect of the supplementary lighting by reflective film mulching and its establishment in the north side of greenhouse on the utility of light at tomato by means of investigating changes of leaf temperatures, stomatal features, transpiration rates and photosynthetic rates. Stomatal density of leaves were high in the reflective film mulching but sizes of stomata were not different. As the osmotic potential in rooting zone was low, the stomatal resistance was high, transpiration rate was low, and leaf temperature was increased by 40.62$^{\circ}C$. And also in the block of reflective film mulching photosynthetic rates were decreased hut chlorophyll contents were not different. Especially, there is an effect of controlling greenhouse whiteflies by treatment of reflective film mulching. It is thought that the reason of high quality or increasing yield at several crops by supplementary lighting, such as reflective film mulching, would be caused by influences of absorption and distribution of nutrients through high transpiration rate and photosynthesis which resulted from increase of stomata.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.288-299
• /
• 1996

This is the basic study to investigate the amount of transpirational water loss in thrifty mature Quercus mongolica stand by the heat pulse method. The differences of heat pulse velocity by direction and depth, differences of heat pulse velocity by dominant, codominant and suppressed trees, diurnal changes of heat pulse velocity due to the change of leaf water potential, vapor pressure deficit and radiation, and sap flow path way in sapwood by dye penetration were measured in stems. Finally the amounts of daily and annual transpiration in stand were calculated by the heat pulse velocity. The results obtained were summarized as follows : 1. Relationship between heat pulse velocity(V) and sap flow rate(SFR) was obtained as a equation of SFR=1.37V. 2. The sap flow rate was high in the order of dominant, codominant, and suppressed trees. The daily heat pulse velocity changed with radiation, temperature and vapor pressure deficit. 3. The heat pulse velocity showed the similar diurnal variation as the leaf water potential change. 4. The heat pulse velocity showed the highest value in May(4.0cm/hr in average), the lowest one in July(2.9cm/hr in average). 5. The heat pulse velocity in the same stem presented the highest value in the northern direction, medium in western, and the lowest in southern and eastern. 6. The heat pulse velocity in stem was highest in 0.5cm, medium in 1.0cm, and lowest in 1.5cm depth from the surface of stem. 7. The sap flow path way in stem showed sectorial straight ascent pattern in four sample trees. 8. The amount of sap flow(SF) was presented as a equation of $SF=1.37A{\cdot}V$(A: the cross-sectional area of sapwood, V: heat pulse velocity), and especially SF was larger in dominant tree than codominant and suppressed trees. 9. The amount of daily transpiration was 5.6ton/ha/day, and its composition ratio was 72% at day and 28% at night. 10. The amount of stand transpiration per month was largest in May(168ton/ha/month), lowest in July(125ton/ha/month). The amount of stand transpiration per year was 839ton/ha/year.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.3
• /
• pp.260-269
• /
• 1986

This experiment was conducted to investigate the effect of mulching materials on the emergence rate, root dry weight and grain weight of sesame using variety Poong Nyun Ggae and also their effects on physical properties of soil, evapotranspiration and weed growth on the respective plots were studied. The effect of soil water holding capacity at mulching with polyethylene film and straw increased 5.4%, 2.8% to non-mulched plot respectively. The maximum soil temperature was raised up to 4$^{\circ}C$ by applying clear film and was dropped down to 7$^{\circ}C$ by straw. The minimum soil temperature was raised up to 2$^{\circ}C$ by clear film and was dropped down to 3$^{\circ}C$ by straw. In the early stage, the soil physical properties of clear film mulching were better than those of non mulching, and so was in emergence rate. In the late stage, soil strength was high at non mulching, and soil porosity, soil aeration and water infiltration rate were high at film and straw mulchings. Total root dry weight was great at clear film mulching, and root dry weight was concentrated mainly in the upper 10 cm of soil profile. The amount of weeds collected was the least at black film mulching. There were of little difference in evapotranspiration among treatments. The grain yield of sesame was increased to 57% by polyethylene film and 25% by straw mulching.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.168-172
• /
• 1996

The soil moisture content and its relation to plants may be important in determining the crop growth and yield. The present study was undertaken to evaluate the leaf water potential and photosynthetic activity in soybean plants as affected by the timing of soil water stress. The soybean variety, 'Tachinagaha', was grown in a pot. The 15 day-old seedlings were subject to the three levels of soil moisture content(25, 40 and 55%) for 25 days. Then the treated soybean plants were placed again at the level of 25% soil moisture content for 25 days, and were compared with the control which was well-watered at 40% level for whole growth period. Soybean plants grown under continuous drought showed higher apparent photosynthetic rate(AP) than those under well-watering /drought in the first /second water treatment, suggesting that AP was adjusted after previous acclimation to drought. Over a wide range of photosynthetic photon flux densities(PPFD), drought or excessive water stress resulted in the decrease in AP when compared with the control. AP and stomatal conductance were decreased in soybean plants subject to water deficit stress, suggesting that AP and stomatal conductance were more sensitive to drought than excessive water stress.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.2
• /
• pp.1-10
• /
• 2002

Hull-propeller-rudder interactions are studied by the iterative computational procedures. Hull effects on the propeller are reflected through the effective velocities computed by the vortex ring method which used the measured nominal wake as input data. A potential based panel method has been developed to solve the propeller-rudder interactions using the obtained effective velocities. Steady flow characteristics around the rudder surface can be obtained by computing the induced velocities on the rudder by the propeller and vice versa are computed by the iterative manner until the converged solutions are obtained. Flow characteristics around the propeller and the rudder are measured by Laser Doppler Velocimetry(L.D.V.) in large cavitation tunnel at Samsung Heavy industries. The gap flow model is adopted to solve the characteristics of the horn rudder. Numerical results are compared with the experimental values and the computed velocity fields and pressure distributions with rudder angle on the horn rudder surface show good agreement with measured ones in large cavitation tunnel.

• Journal of Navigation and Port Research
• /
• v.30 no.10 s.116
• /
• pp.869-875
• /
• 2006

This paper presents the method for developing an optimum hull form with minimum wave resistance using SQP(sequential quadratic programming) as an optimization technique. The wave resistance is evaluated by a Rankine source panel method with non-linear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of the hull surface is represented and modified using NURBS(Non-Uniform Rational B-Spline) surface patches. To verity the validity of the developed program the numerical calculations for Wigley hull and Series 60( $C_B=0.6$) hull have been performed and the results obtained by the numerical calculations have been compared with the original hulls.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.47-53
• /
• 2005

This paper presents the method for developing an optimum hull form with minimum wave resistance using SQP(sequential quadratic programming) as an optimization technique. The wave resistance is evaluated by a Rankine source panel method with non-linear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of the hull surface is represented and modified using NURBS(Non-Uniform Rational B-Spline) surface patches. To verity the validity of the developed program the numerical calculations for Wigley hull and Series 60(C${_B}$=0.6) hull had been performed and the results obtained after the numerical calculations had been compared with the original hulls.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.6
• /
• pp.714-725
• /
• 2003

The theory of the current-type electromagnetic flowmeter for a high temporal resolution was developed for two-phase flow measurements. To predict the output of the current-type flowmeter, the three-dimensional virtual potential distribution C and the newly introduced flow pattern coefficient f were derived and computed. The output of flowmeter depends on the liquid conductivity (sensitive to temperature) and flow configurations of the two-phase flow with the sinusoidal excitation over 100 Hz. The flow pattern coefficient was specially devised to separate the dependency on the flow configuration of the two-phase flow from that on the liquid conductivity which can be expressed with the calibration of single-phase flow. Using the finite difference method, the three-dimensional virtual potential distributions were computed for the electrode of finite size. By taking derivative of the virtual potential, the weight functions were evaluated and compared with existing analytic series solution for the point-electrode. There was a reasonable correspondence between the present and existing results. In addition, the flow pattern coefficients were evaluated for annular flows with various film thicknesses, and compared with the experimental results by the impedance spectroscopy. The numerical results agreed well with the experimental data.