• The Korean Journal of Pesticide Science
• /
• v.17 no.3
• /
• pp.145-154
• /
• 2013

Flonicamid was a water-soluble and systemic insecticide. It was applied to control neonicotinod pesticide-resistant cotton aphid in sweet peppers. However, the residue levels of total flonicamid in sweet pepper exported to Japan in 2009 were exceeded the maximum residue limit (MRL). This study was conducted to elucidate residual properties of flonicamid parent compound and its metabolites in sweet peppers. It was carried out to compare the variation of residues in sweet pepper in three different greenhouses for 21 days after 3 times application with 7 days interval. The mean residues were 0.176, 0.152 and 0.108 mg $kg^{-1}$ and the residue levels in sweet pepper among three greenhouses show significant difference. The maximum residue levels were detected 10 days later after last treatments. The overall residue levels were lower than MRL 2.0 mg $kg^{-1}$ (by Korea) and 0.4 mg $kg^{-1}$ (by Japan in 2009 but now revised MRL is 2.0 mg $kg^{-1}$). But the residue level of total flonicamid at the 21th day after 3 times treatment with 7 days interval was 0.429 mg $kg^{-1}$ restricted by the application of double rate than recommended rate. The amounts of metabolites, TFNA, 4-Trifluoro methyl nicotinic acid and TFNG, N-(4-trifluoro methyl nicotinoyl) glycine were increased while flonicamid parent compound was decreased over time. Therefore the longer trial period should be needed for flonicamid in sweet peppers.

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.293-301
• /
• 2013

This study was carried out to investigate the pesticide residue pattern among different leafy vegetables applied with foliar spraying under greenhouse and to check extrapolating from some residue trial data to other minor crops. Leafy vegetables used in this study were: Mustard greens (Brassica juncea L.), Kale (Brassica oleracea L.), Dacheongchae (a kind of pak-choi (Brassica rapa subsp. chinensis L.)), Leaf broccoli (Brassica oleracea var alboglabra), Perilla leaf (Perilla frutescens (L.) Britton var. Frutescens), Leaf lettuce (Lactuca sativa L.), Swiss chard (Beta vulgaris L. subsp. vulgaris) and Red leaf chicory (Cichorium intybus L. var. foliosum Hegi). These are cultivated all year under indoor or outdoor and cut the leaf from plant continuously during harvest time. The amounts of pesticide deposit in/on the continuous harvesting leafy vegetables were affected by the ratios of leaf area to weight. Ratio of perilla leaf was the largest among crops as 58 $cm^2/g$. The residue levels of 7 pesticides in/on perilla leaf were the highest than those of other crops through the statistical analysis from zero day to fifth day after last application. The representative crop in 8 crops was perilla leaf selected based on the amounts of daily consumption and the high residues. This study suggest that the continuous harvesting leafy greens should be separated from the one time harvesting leafy vegetables for the pesticide recommendations because of different harvesting habits and pre-harvest intervals.

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.435-439
• /
• 2013

Bacillus amyloliquefaciens M27 was selected as a control agent for the biological control of cucumber powdery mildew. The new mixture of B.amyloliquefaciens M27 and plant (Eucalytus) extract was developed to improve the control activity of B.amyloliquefaciens M27 against cucumber powdery mildew. The mixed formulation showed the high preventive and curative control effect against cucumber powdery mildew when it was diluted at 500 times and foliar-sprayed. Its control effect was higher in preventive spraying than curative spraying. When 500-fold diluted solution of the formulation was sprayed preventively four times at five-day intervals, three times at seven-day intervals and twice at ten-day intervals, the diseased leaf area was shown to be 4.4%, 8.0%, 27.9%, respectively; Whereas the diseased leaf area in the control plot was 45.4%. When the 500-fold diluted formulation was sprayed curatively four times at five-day intervals, three times at seven-day intervals and twice at ten-day intervals after occurred cucumber powdery mildew, the diseases leaf area was 11.5%, 25.2%, 51.8%, respectively; whereas in the control plot, the diseases leaf area was 64.3%. When the 500-fold diluted formulation was treated four times at five-day intervals in the plastic house, its control effect was higher than that treated three times at seven-day intervals and twice at ten-day intervals. As the results, the mixed formulation of B.amyloliquefaciens M27 and plant extract could be a promising candidate of bio-fungicides for the environment-friendly control of powdery mildew of cucumber.

• Korean journal of applied entomology
• /
• v.47 no.4
• /
• pp.447-456
• /
• 2008

Five effective strains against tobacco cutworm, Spodoptera litura (Lepidoptera: Noctuidae), Steinernema carpocapsae (GSN1), Steinernema sp. (GSNUS-10), Steinernema sp. (GSNUS-14), Heterorhabditis bacteriophora Hamyang (HbH), and Heterorhabditis sp. (GSNUH-1) were selected among 14 isolates of Korean entomopathogenic nematode in laboratory tests. $LC_{50}$ values of above five strains against tobacco cutworm were various by different nematode strains and developmental stages of tobacco cutworm. $LC_{50}$ value of S. carpocapsae (GSN1) was the lowest by $4.0{\sim}8.3$ infective juveniles (Ijs) and 2nd instars of tobacco cutworm was most susceptible. Pathogenicity of five effective strains against tobacco cutworm depends on nematode strain, concentration, and application times. The most effective strain was determined as S. carpocapsae (GSN1). Two or three times of applications were effective regardless of nematode strain, or concentration. Efficacy of S. carpocapsae (GSN1), Steinernema (GSNUS-10), Steinernema (GSNUS-14), and Heterorhabditis (GSNUH-1) was variable depending on nematode strain, concentration, application times, and host variety. S. carpocapsae (GSN1) was the most effective and inoculation of 100,000 infective juveniles per m2 (720,000 Ijs/7.2 $m^2=1{\times}10^9$ Ijs/ha) resulted in higher efficacy. Three times of application of nematodes led to higher control efficacy than one or two applications. Efficacy of nematodes was higher on Chinese cabbage than cabbage or kale.

• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.103-112
• /
• 1986

This study was carried out to prevent the entwining of rice straw on rotary shaft and blade where rice straw was spreaded on paddy field as an organic source before rotary tilling. The rotary tillage was conducted in the paddy field having the soil moisture contents of 30%, 39%, 59% in dry basis and spreaded rice straw (450kg/10a) of 30cm, 45cm, 90cm length with the edged curve angles of rotary blade of $30^{\circ}$, $40^{\circ}$, $50^{\circ}$, $55^{\circ}$ at Yuseung area. And the test were performed on the plot which has width of 30cm and 5cm length and the quantity of entwined rice straw was analized. The test results were summarized as the followings. 1. Entwining phenomenon of rice straw was decreased as the blade edged curve angle increased. The edged curve angle of rotary blade must be determind by considering the characteristics of soil cutting resistance, tilling torque and entwining phenomenon of rice straw. But according to the entwining phenomenon of rice straw only, the edged curve angle of rotary blade should be bigger than $55^{\circ}$ for design. 2. Amount of entwining rice straw was minimized when soil moisture contents was 30 percent (d. b.). It would be better that rotary tillage is performed when soil moisture contents is lower than 30 percent in dry basis. 3. Amount of entwining rice straw was minimized when the length of rice straw was 30cm with $55^{\circ}$ edged curve angle. Therefore, it would be better to chop rice straw as 30cm. 4. Entwining phenomenon of rice straw was decreased as the forward speed decreased. To decrease the entwining rice straw, rotary tillage should be done with forward fist gear (0.35m/s).

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.2
• /
• pp.89-96
• /
• 1975

The experiment was carried out to investigate the chemical properties of cement kiln dusts, abundantly produced from cement industry as a byproduct, and their effectiveness on rice yield. The field experiment was conducted on the acid paddy soil developed on basalt at Dongsong-Myon, Chulwon-Kun, Gangwon-Do. Two kinds of cement kiln dusts were used ; By Pass (BP) collected from the suspension preheater and Electric Precipitate (EP) from the cottrell electric precipitator. The levels of cement kiln dust applied were 100kg/10a, 200kg/10a and 300kg/10a, and the recommended variety "Nong Back" was adopted for this experiment. The results obtained are summarized as follows ; 1. The component of cement kiln dusts seems to be quite suitable for liming material. BP has 55% alkalinity, 41.7% of soluble calcium, 9.8% of soluble magnesium and 4.5% of water soluble silicate, while EP has 53.5% alkalinity, 41.7% soluble calcium, 8.3% soluble magnesium and 1% water soluble silicate. 2. The relative effectiveness of cement kiln dust in the soil will be superior due to very fine particle size. EP pass through completely 270 mesh screen, and 95% of BP pass through 150 mesh screen, 68% passing 270 mesh. 3. BP application at the rate of 100kg/10a increased 21% of rice yield as compared with control and EP 15%. It was observed that the affected yield components were increased panicle number per hill, grain number per panicle and 1,000 grains weight. 4. The application of optimum amount (100kg/10a) of cement kiln dusts accelerated the uptake of nutrients by rice plant and increased rice yield. However, the excess amounts (200kg/10a, 300kg/10a) of cement kiln dusts retarded the uptake of nutrients from soil.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.2
• /
• pp.69-80
• /
• 1975

Relationships between yield and various nitrogen efficiencies, between efficiencies and between efficiency and nitrogen uptake amount of rice plant were proposed and tested using data from N.P.K simple trials about 30 to 50 locations, for three years. Established relationships are well in accordance with experimental results by showing highly significant correlations between them. The overall indications are that high yielding capacity of fields with fertilizer application, depends primarily on high fertilizer nitrogen uptake by increasing fertilizer use efficiency (Eu), secondly the efficiency (Ef) of absorbed fertilizer nitrogen (Nf) and fertilization efficiency (Fe) and also depends much on nitrogen efficiency for grain yield (E) to great extend and that the efficiency (Es) of soil nitrogen (Ns) contributes to E more than Ef does. All nitrogen efficiencies are negatively correlated with the uptake amount of corresponding nitrogen and counterpart efficiency. Es and Ef could be determined firstly by difference method and secondly E versus Cs (Cs=Ns/Ns+Nf) plotting and thirdly E-Cs plotting with labelled fertilizermethod using the equation E=Es Cs+B where B=Ef Cf but a constant under the given condition and at last Y-Ns plotting with labelled fertilizer using Eq Y=$Es{\cdot}Ns+B$ where B=$Ef{\cdot}Nf$. Es which seems not much variable from field to field is mostly greater (about 80% of tested fields) than Ef which is much variable and depends much on fertilizer form. The relationships tested and well agreed are as follows: 1. Y=$Es{\cdot}Ns+Ef{\cdot}Nf$ (Y is yield) 2. E=$Es{\cdot}Cs+Ef{\cdot}Cf$ where Cf=Nf/Nf+Ns 3. E=b-aN where E=E, Es or Ef and N=N, Ns or Nf respectively, (E=Y/N, N=Nf+Ns), b is theoretical maximum under the given system and a is tangent at N=O of the curve, Y=EN. 4. Fe=Ef Eu and Se=$Es{\cdot}Eu$ where Se is efficiency of soil available nitrogen. 5. E=$(Se{\cdot}Cs+Fe{\cdot}Cf)/Eu$ 6. Y=$Es{\cdot}Eu{\cdot}Sf+Ef{\cdot}Eu{\cdot}Fn$or Y=$Es{\cdot}Eu{\cdot}Ea{\cdot}Sn+Ef{\cdot}Eu{\cdot}Fn $where Sf=$Ea{\cdot}Sn$, Ea is soil available nitrogen equivalent to fertilizer(Sf) divided by total soil nitrogen (Sn).

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.125-131
• /
• 2018

The effect of 1-methylcyclopropene (1-MCP) in the storability of kimchi cabbage at cold storage condition was investigated. Kimchi cabbage (Brassica campestris L. cv Ryouckgwang) was divided four groups, forced air cooling (FAC), FAC + 0.03 mm linear low density polyethylene liner (Liner), $FAC+2{\mu}L{\cdot}L^{-1}$ 1-MCP (1-MCP), and FAC + 1-MCP + Liner. After each treatment kimchi cabbage was stored at $2^{\circ}C$, 95% RH. Quality parameters were weight loss, soluble solids content (SSC), firmness, and color ($CIE\;L^*$, $a^*$, $b^*$, chroma, hue angle). Weight loss during storage was showed significant difference by Liner treatment. In particular FAC + 1-MCP + Liner treatment showed 12.5% reduction after 6 weeks of storage period and minimized the weight loss rate compared to other treatments. SSC of kimchi cabbage was $2.5^{\circ}Brix$ at harvest and FAC + 1-MCP + Liner treatment maintained the SSC until 3 weeks, while in other treatments gradually were increased. The firmness of kimchi cabbage was 24.0 N immediately after harvest and the firmness at harvest time tended to be maintained at 22.6 N after 6 weeks of storage in FAC + 1-MCP + Liner treatment. During the storage period, the color change of the kimchi cabbage leaf can be confirmed by $CIE\;a^*$ and hue angle value. 1-MCP treatment alone did not affect the color change, however 1-MCP + Liner treatment was able to maintain the chromaticity at harvest time while minimizing the change of $CIE\;a^*$ and hue angle. These results suggest that 1-MCP treatment is not effective for the storage of kimchi cabbage but can be maintained for up to 6 weeks when treated with Liner.

• Journal of Korean Society of Forest Science
• /
• v.102 no.4
• /
• pp.522-529
• /
• 2013

Climate change will affect the physiological traits and growth of forest trees. This study was conducted to investigate the effects of an experimental warming on growth and physiological characteristics of Pinus densiflora S. et Z. seedlings. One-year-old P. densiflora seedlings were planted in control and warmed plots in April 2010. The air temperature of warmed plots was increased by $3^{\circ}C$ using infrared lamps from November 2010. We measured shoot height, root collar diameter, above and below ground biomass, chlorophyll contents and leaf nitrogen concentration from March 2011 to March 2013. Seedling height and root collar diameter showed no significant difference between warmed and control plots except for root collar diameter measured in June 2012. Seedling leaf biomass was lower in the warmed ($23.94{\pm}2.10g$) than in the control ($26.08{\pm}1.72g$) plots in 2013. Shoot to root ratio (S/R ratio) was lower in the warmed ($1.09{\pm}0.07$) than in the control ($1.31{\pm}0.10$) plots in 2013. Leaf nitrogen concentrations and chlorophyll contents were not significantly different between warmed and control plots except for leaf nitrogen concentration in 2011. Leaf C/N ratio was increased in 2012 under the warming treatment. Low growth and S/R ratio in warmed plots might be related to the higher temperature and water stress. In the future, the below-ground carbon allocation of P. densiflora might be increased by global warming due to temperature and water stress.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.407-415
• /
• 2009

To investigate the effects of seeding date, nursery days and plug cell size on seedling growth and quality of waxy corn. This study was carried out in the field of the National Institute of Crop Science in 2007. Varieties used were two waxy corn hybrids cvs. Chalok# 1 and Chalok# 4. The plant height, number of leaves and dry weight of waxy corn seedlings were significantly affected by seeding dates and plug cell size, while no differences between varieties. The growth of seedlings was faster in March 14 seeding than in May 8 and July 4 seedings. Based on plant height, March 14 seeding, May 8 seeding and July 3 seeding reached suitable size for transplanting after 30 days (21.6cm), 15 days (25.5~26.9cm) and 10 days (21.6~24.0cm) in the nursery, respectively. Seedlings of March 14 seedling and May 8 and July 3 seeding reached suitable number of leaves i,e. 2~3 leaves, 15~20 days after seeding on March 14 and 10 days after seeding on May 8 and July 3. Dry weights of 30 days seedling for March 14 seeding, 20 days seedling for May 8 seeding and 15 days seedling for July 3 seeding were 0.43g, 0.57~0.67g and 0.53g, respectively, and the dry weight of seedlings increased by 2~3 folds at the later nursery days. The suitable nursery days of waxy corn were 20 days on March 14 seeding and 10~15 days on May 8 or July 3 seeding.