• Composites Research
• /
• v.17 no.6
• /
• pp.28-36
• /
• 2004

Micro-tow deformation during forming of PVC foam-fabric composite sandwich structure is investigated to find out the correlation between forming condition and material deformation. The foams used in this research are PVC foams which have 4 different densities and the fabric composite is Carbon/epoxy prepreg which is plain weave (3k) as a skin material. Tow parameters such as crimp angle and tow amplitude are measured using microscope and a proper image tool and are compared with each other. In order to find out the effect of foam deformation during forming on tow deformation the compressive tests of foams are performed in three different environmental temperatures ($25^{\circ}C$, $80{\circ}C$, $125^{\circ}C$). The microscopic observation results show that the micro tow deformations are quite different from each other with respect to the foam density and forming pressure.

• The Korean Journal of Rheology
• /
• v.9 no.4
• /
• pp.190-199
• /
• 1997

단열용도의 폴리우레탄 미세포 포움의 가공에 대한 연구를 수행하였다. 미세포 구조 를 얻기 위해서는 핵생성율을 증진시키고 균일한 분포의 기포를 생성시켜야 한다. 이를 위 해 이산화탄소 기체를 풀리올과 이소시아네이트에 각각 과포화시키고 충돌혼합하여 초음파 가진을 적용하였다. 이산화탄소 기체가 수지 내부에서 기포 내부로 확산함에 따라 기포의 성장이 조절된다고 가정하고 금형이 충전되는 동안에 금형 내부에서의 기포성장기구를 이해 하기 위하여 수치적인 방법으로 이론적 연구를 수행하였다. 경화 시간과 확산 경계를 고려 하여 최종적인 기포의 크기를 계산하였으며 반응속도론을 고려하여 중합반응동안의 폴리우 레탄의 점도의 변화를 예측하고 경화 시간을 결정하였다. 실험적으로 결정된 기체 분자수를 기준으로 하여 이론적으로 확산경계를 예측하였다. 화학적 발포제인 물과 함께 물리적 발포 제인 이산화탄소를 각각 1,2,3기압의 포화압력으로 변화시키면서 폴리올과 이소시아네이트에 포화시켜 폴리우레탄 포움을 제작하고 제작된 포움의 밀도, 열전도도, 및 기포의 수와 지름 을 측정하였다. 측정된 결과로부터 이산화탄소의 포화압력과 초음파 가진이 포움의 기포핵 생성에 미치는 영향을 살펴보았다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.618-624
• /
• 1989

Ultrasonically induced bubble formation in thermoplastic matrix was investigated experimentally and theoretically. polystyrene was saturated with nitrogen under the pressure of 0.2 to 3.45 MPa in a pressure chamber, followed by pressure release and ultrasonic bubble nucleation. Zinc stearate was added to polystyrene as the nucleating agent to induce heterogeneous nucleation. Various mixture of low density polyethylene and polyethylene wax was also saturated with the gas. The foamed specimens with or without ultrasonically induced bubble nucleation was modeled by modifying the classical nucleation theory. The rate of ultrasonic nucleation was predicted for homogeneous and heterogeneous nucleation at a conical cavity. This study showed that the heterogeneous and heterogeneous nucleation at a conical cavity. This study showed that the heterogeneous nucleation must be employed for ultrasonic production of bubbles in a viscous fluid and the homogeneous nucleation for ultrasonic production of bubbles in a low viscosity fluid.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.198-201
• /
• 2004

This paper aims to investigate the micro-mechanical behaviour of tow geometry with forming pressures and densities of foams during the curing process of plain weave carbon fibre fabric prepregs onto polymer foams. In order to find out and compare deformation patterns between different forming conditions, tow parameters such as amplitude and crimp angle etc. are investigated. From the observation results, geometric difference in the tow architecture with respect to forming conditions and foam characteristics were found. To observe the micro-deformation of the fabric structure, appropriate specimens from carbon fibre-foam sandwich structures are sectioned and observed under the microscope.

• Composites Research
• /
• v.19 no.2
• /
• pp.13-19
• /
• 2006

In this paper, parametric study was carried out to design sandwich structures for EDM machines controlling stacking sequence, stacking thickness of composites and rib configuration. Sandwich structures which are dealt with in this paper are composed of fibre reinforced composite for skin material and foam or resin concrete for core materials. The sandwich column has cruciform rib to enhance bending stiffness of the structure and the bed has several vertical ribs to resist the normal forces and vibration. The design parameters such as rib thickness and stacking sequence were controlled to enhance the system robustness. Finite element analysis was also carried out to verify the variation of static and dynamic stiffness of the structures according to the variation of the parameters. Vibration tests were performed to verify the natural frequencies and damping ratios of the manufactured composite structures. The appropriate shape and configuration conditions for micro-EDM machine structures are proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.156-163
• /
• 2006

The objective of this paper is to evaluate the performance of an operating system for embedded devices to that of the commercially available Windows platform. Analysis includes benchmarking the operating systems using a 'typical' PC workload, as well as identifying low-level areas in which the updated OS is limiting or enhancing the system performance. The primary benchmarking suites selected for this paper are 'WinStone' and 'HBench', with the former providing an application-based suite of tests and the latter providing the most direct means for isolating operating system effects on the system. We have demonstrated in a case study for embedded microprocessors, and evaluated a Windows platform at a low-level test as well as an application level using a benchmarking suite.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.183-186
• /
• 2003

Reaction injection molding (RIM) is a widely used process for producing various kinds of complex parts including automobiles, furniture, appliances, and housings. In RIM, products are made from two or more chemical components through mixing, chemical reaction, and molding [1]. Liquid reactants from two supply tanks flow at high pressure into a mix head, where they impinge at high velocity. (omitted)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.7 s.250
• /
• pp.849-856
• /
• 2006

In this paper, fabric composite draping on hemisphere moulds were studied to find out the deformation behaviour of micro-tow structures of fabrics during draping and thermoforming. Aluminium and PVC foams were used to fabricate the hemisphere moulds for draping tests. In order to observe the local tow deformation pattern during the draping several specimens for microscopic observation were sectioned from the draped hemisphere structures. The effect of forming condition and mould properties on tow deformation was investigated by the microscopic observation of the tow parameters such as crimp angle. Normalization scheme was performed to compare tow parameter variations with different forming conditions. Stress-strain .elations of two different PVC foams (HT70 and HT110) were tested to investigate the effect of foam property on the micro-tow deformation during forming.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.39-48
• /
• 2006

In this paper, polymer composites based sandwich structures like beams and plates are optimised by using parametric study. The structures are composed of fibre reinforced composites for facial material and resin concrete and PVC foam for core materials. The stacking sequences and thickness of the composites are controlled as major parameters to find out the optimal condition for machine tool components. For the plate structure of machine tool bed composites-skined sandwich structure which has several ribs are proposed to enhance bending stiffnesses in two major directions at the same time. Dynamic robustness of a machine tool structure is investigated using modal analysis. From the results optimal configuration and materials for high precesion machine tools are proposed. And the plate was made of fiber reforced composite material and PVC foam.

• The Korean Journal of Rheology
• /
• v.7 no.3
• /
• pp.237-249
• /
• 1995

폴리우레탄 미세포 포움의 가공에 대한 연구를 수행하였으며 기체 과포화 수지 내 의 핵생성율을 증진시키기 위하여 폴리올과 이소시아네이트의 혼합물에 초음파 가진을 적용 하였다. 미세포 구조는 고압에서 질소 가스로 폴리올을 과포화ㅣ키고 폴리우레탄의 두 성분 을 충돌혼합시킨 직후 초음파에 의해 기포를 생성시켜 이루어진다. 낮은 포화 압력에서 질 소에 의해 포화된수지의 핵생성율을 증가시키기위하여 초음파 가진을 적용하였다. 확산에 의해 기포의 성장이 조절된다고 가정하고 금형이 충전되는 동안에 금형 내부에서의 기포성 장기구를 이해하기 위하여 수치적인 방법으로 이론적 연구를 수행하였다. 경화 시간과 확산 경계를 고려하여 최종적인 기포의 크기를 계산하였으며 반응속도론을 고려하여 중합반응 동 안의 폴리우레탄의 점도의 변화를 예측하고 경화 시간을 결정하였다. 이론적 및 실험적으로 결정된 기포의 수를 기준으로 하여 확산 경계를 예측하였다.