• Journal of Chest Surgery
• /
• v.43 no.4
• /
• pp.394-398
• /
• 2010

Background: The overexpression of transforming growth factor-beta 1 receptor II (TGF-${\beta}1$RII) and transforming growth factor-beta 1 (TGF-${\beta}1$) ligand may be involved in the formation of a bulla. In this study, we tested if serum TGF-${\beta}1$ ligand levels correlated with the expression level of TGF-${\beta}1$RII and TGF-${\beta}1$ in bullous tissues from patients with spontaneous pneumothorax. Material and Method: Bullous lung tissues and blood samples were obtained from 19 patients with spontaneous pneumothorax, 18 males and 1 female, aged 17 to 35 years old. The bullous tissues were obtained by video-assisted thoracic surgery (VATS), fixed in formalin, embedded in paraffin, and cut into $5{\sim}6{\mu}m$ thick slices. Sections were immunohistochemically stained with primary antibodies against TGF-${\beta}1$ or TGF-${\beta}1$RII, and serum levels of TGF-${\beta}1$ in patients and normal controls was measured by enzyme-linked immunosorbent assay (ELISA). Result: Of the 19 patients, 16 were TGF-${\beta}1$ positive and 10 were TGF-${\beta}1$RII positive. Among the 16 TGF-${\beta}1$ positives, 9 were also TGF-${\beta}1RII$ positive. As seen previously, strong immunohistochemical staining of TGF-${\beta}1$RII and TGF-${\beta}$ was detected in the boundary region between the bullous and normal lung tissues. Average TGF-${\beta}1$ blood levels of both TGF-${\beta}1$ and TGF-${\beta}1$RII positive patients was $38.36{\pm}16.2ng/mL$, and that of five controls was $54.06{\pm}15ng/mL$. Conclusion: These results suggest that overexpression of TGF-${\beta}1$ and TGF-${\beta}1$RII expression may be involved in the formation of bullae. TGF-${\beta}1$ blood levels in patients with primary spontaneous pneumothorax is lower than normal people, suggesting that the high level of local TGF-${\beta}1$ expression in the bullous tissue region, but not in the whole blood, may contribute more in the formation of bullae.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.710-716
• /
• 2013

New and renewable energy sources have drawn attention because of climate change. Many studies have been carried out in waste-to-energy field. Fast pyrolysis of waste lignocelluosic biomass is one of the waste-to-energy technologies. Bubbling fluidized bed (BFB) reactor is widely used for fast pyrolysis of the biomass. In BFB pyrolyzer, bubble behavior influences on the chemical reaction. Accordingly, in the present study, hydrodynamic characteristics and fast pyrolysis reaction of waste lignocellulosic biomass occurring in a BFB pyrolyzer are scrutinized. The computational fluid dynamics (CFD) simulation of the fast pyrolysis reactor is carried out by using Eulerian-Granular approach. And two-stage semi-global kinetics is applied for modeling the fast pyrolysis reaction of waste lignocellulosic biomass. To summarize, generation and ascendant motion of bubbles in the bed affect particle behavior. Thus biomass particles are well mixed with hot sand and consequent rapid heat transfer occurs from sand to biomass particles. As a result, primary reaction is observed throughout the bed. And reaction rate of tar formation is the highest. Consequently, tar accounts for 66wt.% of the product gas. However, secondary reaction occurs mostly in the freeboard. Therefore, it is considered that bubble behavior and particle motions hardly influences on the secondary reaction.

• Journal of Chest Surgery
• /
• v.31 no.6
• /
• pp.634-637
• /
• 1998

An unusual placentoid bullous lesion of the lung was reported. The patient was a 27-year- old woman with a 1-week history of chest pain and mild dyspnea. Chest radiographic studies showed multiple huge bullae in right upper lobe and variable-sized bullae in middle and lower lobes with collapse. She underwent right pneumonectomy with preoperative impression of bullous lung disease and emphysema. Histopathologically, the most distinctive features were villous structures within bullous airspace, which resembled placetal villi with degeneration.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.356-362
• /
• 2016

Light-weight concrete uses forming agents for reducing weight and high heat insulation property. However, the forming agents make problems of decreased volume and compressive strength of the concrete. This research aims to having weight-reduction and securing heat insulation property using recycled wasted form polyurethane without any forming agents. A small quantity of admixture used for constructability and avoiding material segregation. We picked admixtures from two different companies which shows evenly dispersed of wasted form polyurethane. This research conducts a study on the effect of mixing ratio of admixture on the light-weight concrete used wasted form polyurethane. As a result of the test, increased mixing ratio of the admixtures results reduced fluidity of concrete. On the other hand, percentage of moisture content and compressive strength are increased slightly. Combustibility performance and sound insulation performance are also secured, as well.

• Journal of Chest Surgery
• /
• v.29 no.4
• /
• pp.408-413
• /
• 1996

In most cases of diffuse bullous emphysema and chronic obstructive lung disease, t e risk of surgical treatment is very high. But surgical treatment in selected cases of bullous emphysema with localized involvement of only one side of the lung has suggested safe and good management. So patient selection of surgical treatment Is one of the most important things in management of bullous emphysema. From 1987 to 1992, 11 patients were operated for bullous emphysema with giant bullae at the Department of Thoracic and Cardiovascular Surgery of Chonbuk National University Hospital. Author selected surgical candidates who had progressive dyspnea and symptomatic bullae occupying more than one third of the hemithorax and shifting the trachea and mediastinum to the opposite side of the lung. There were 7 males and 4 females ranged from 19 to 61 years of age. Operative procedures were bullectomy and/or wedge resection in 7 cases, segmentectomy in 2 cases and lobectomy in 2 cases. Symptoms and pulmonary function of all patients were improved six months to three years postoperat vely. There were no postoperative death. We conclude that surgical treatment of bullous emphysema with giant bullae is safe and a good treatment of modality in indicated patients.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.53-56
• /
• 2007

Recently, waste concrete emission has been increased by acceleration of urban development and the rapid growth of redevelopment projects, so recycling of waste concrete is actively progressed, But the usage is limited to a lower value added such as the roadbed material etc. To produce the high quality recycled aggregate, breaking and washing process is added to the existing process and inevitably increases the occurrence of particle, because old mortal is included in the recycled aggregate. Therefore, this study purpose is analysis the properties of lightweight foamed concrete made by waste concrete sludge which is the by-product from produce the recycled aggregate. In result, possibility of manufacture of lightweight foamed concrete which gives equal performance compared with ALC was detect(scope of density : $0.5{\sim}0.6$, scope of compressive strength : $3.5{\sim}4.0MPa$). And scope of porosity is as follow ; total porosity : $27{\sim}30%$, open porosity : $1{\sim}5%$

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6C
• /
• pp.259-265
• /
• 2012

This paper investigates engineering characteristics of lightweight soils mixed with air foam and tire powder. Lightweight soils could be used as foundation materials, back-fills of reducing vibrating or abutment, and so on. Unconfined and triaxial compression tests were carried out to analyze strength and deformation characteristics of lightweight soils by changing target moist unit weight and cement contents. In comparison with strength characteristics of two different kinds of lightweight soils with same most unit weights ($13kN/m^3$), unconfined compression tests showed similar compressive strength, however, triaxial compression tests showed that compressive strength of lightweight soils mixed with waste tire powder was relatively larger strength than that of lightweight soils mixed with air foam because of elasticity of waste tire powder. Also, unconfined and triaxial compressive strengths of most of lightweight soils increase with increases of moist unit weight and cement contents. However, the strength of lightweight soils mixed with air foam under $11kN/m^3$, when moist unit weight exceeds a certain cement contents, decreases even though cement contents increase because of the effect in a void gap of air foam.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.557-560
• /
• 2008

This was done by analyzing the sandwich panels that are now widely used in construction work. Sandwich panels are used for diverse purposes in construction work worldwide. In Korea, polystyrene panels that have organic materials as their core material are used. These panels are thus very vulnerable to fire, with risks of core melting, sheet deformation, and hazardous gases. Accordingly, sandwich panels' fire-resistant or non-flammable properties must be secured. To solve these problems, the optimal mixing proportion of lightweight foamed concrete for the sandwich panel core was determined. A new method of doing this was introduced that is completely different from the existing method, wherein a foaming agent is added to realize lightweight concrete. For lightweight concrete, the foaming mechanisms via diverse chemical reactions were identified, H$_2$O$_2$ was added for heating in the reaction, and the concrete foaming was maximized. Through diverse experiments to determine the optimal mixing proportion of lightweight foamed concrete and to examine the filling characteristic of lightweight foamed concrete for sandwich panel cores using waste materials, the physical and mechanical properties of lightweight foamed concrete were examined.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.708-711
• /
• 2010

본 연구에서는 경량혼합토 배합설계변수인 원료토의 중량, 함수비 및 기포재와 첨가할 물의 양, 그리고 강도를 발현하기 위하여 필요한 고화재로서 시멘트첨가량에 대한 최적의 배합설계에 대한 분석을 하였다. 분석을 위해 폐타이어가루와 왕겨를 각각 혼합한 경량혼합토의 압축강도를 비교 분석하였다. 왕겨혼합토는 함유량 3%에서 최대강도가 발현되는 반면 폐타이어혼합토의 경우 함유량 6%에서 최대강도를 보여주었다. 현장에서 설계기준을 만족하기 위한 시멘트비와 폐성분을 적절히 혼합하면 합리적이고 경제적인 배합비를 산출할 수 있다.

• Magazine of RCR
• /
• v.4 no.2
• /
• pp.28-36
• /
• 2009