• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.150-151
• /
• 2019

리튬 이온 배터리가 전기 자동차 및 다양한 어플리케이션에 적용됨에 따라 폐배터리의 수요 또한 증가하고 있다. 내부 화학적 상태가 상이한 배터리의 전기적 특성실험을 통해 파라미터를 선정할 수 있으며 전기적 특성 실험 전 후의 시간차에 따른 파라미터 변화를 반영하는 것이 필수적이다. 제조 공정과정의 파라미터의 측정값과 특성실험 후의 파라미터 재측정값을 비교함으로써 이를 3-D Kmeans Clustering 알고리즘에 반영하여 더욱 정밀한 셀 선별을 실시하였다.

• Resources Recycling
• /
• v.4 no.4
• /
• pp.22-36
• /
• 1995

Waste tires are increased by increasing number of automobiles, which are the symbol of the mordern society. The waste tires create the environmental, visual hazard and landfill space problems. Recycling waste tires is the best way to solve the problems. The landfill space and the natural resources could by reserved by utilizing waste tires. The waste tires were utilized as whole tires, processed tires (crumb rubber) and energy. The plants for manufacturing crumb rubber also were investigated for their equipments and scales.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.4
• /
• pp.263-270
• /
• 2021

In this study, we proposed the necessity of reusing the battery industry after domestic use, preparing legal arrangements by step for recycling, clarifying responsible materials by processing stage, and establishing infrastructure and screening diagnostic rating system. The purpose of this study is to establish a life cycle integrated management system for electric vehicle batteries and to find suitable ways for improving the lifespan of electric vehicle batteries, reuse, and recycling in stages to avoid other environmental pollution problems due to batteries after using electric vehicles used to reduce environmental pollution due to climate change.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.175-180
• /
• 2016

Waste bumpers from out-of-service vehicles are recycled in the manufacturing process of plastic parts by incorporating pristine materials after removing the coated paint on a bumper. This study examined the chemical properties and mechanical properties of a mixture of recycled bumper and pristine materials as a function of the mixing ratio. When the pristine materials and the recycled bumper pieces were mixed, the stiffness (tensile strength and the flexural modulus) was provided by their composition averages. On the other hand, the toughness (Izod impact strength and the elongation-at-break) was lower than their composition averages (i.e., negative deviation). FTIR analysis showed that these results were due to the absence of the compatibility between the pristine materials and recycled bumper pieces. When the recycled bumper pieces were loaded at more than 30 wt. %, the toughness decreased drastically. A previous study showed that a paint removal efficiency up to 80 wt.% was easily attainable. The other 20 wt.% of paint on the bumper is very difficult to remove. Therefore, this study examined the mechanical properties of a mixture of recycled bumper pieces containing the unremoved paint and recycled bumper pieces without paint. When the recycled bumper pieces containing the unremoved paint were incorporated in only small quantities, the mechanical properties were decreased to a great extent. These results show that the paint removal efficiency is very important in the recycled bumper industry.

• Resources Recycling
• /
• v.28 no.5
• /
• pp.3-18
• /
• 2019

Due to the increasing demand for clean energy, the consumption of lithium ion batteries (LIBs) is expected to grow steadily. Therefore, stable supply of lithium is becoming an important issue globally. Commercially, most of lithium is produced from the brine and minerals viz., spodumene, although various processes/technologies have been developed to recover lithium from other resources such as low grade ores, clays, seawaters and waste lithium ion batteries. In particular, commercialization of such recycling technologies for end-of-life LIBs being generated from various sources including mobile phones and electric vehicles(EVs), has a great potential. This review presents the commercial processes and also the emerging technologies for exploiting minerals and brines, besides that of newly developed lithium-recovery-processes for the waste LIBs. In addition, the future lithium-supply is discussed from the technical point of view. Amongst the emerging processes being developed for lithium recovery from low-grade ores, focus is mostly on the pyro-cum-hydrometallurgical based approaches, though only a few of such approaches have matured. Because of low recycling rate (<1%) of lithium globally compared to the consumption of lithium ion batteries (56% of lithium produced currently), processing of secondary resources could be foresighted as the grand opportunity. Considering the carbon economy, environment, and energy concerns, the hydrometallurgical process may potentially resolve the issue.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3298-3303
• /
• 2014

In order to recycle the waste bumper, techniques removing coated paint on a bumper is crucial. Chemical methods are known to be much more effective in removing the paint compared to physical methods. However, the chemical methods generally use toxic solvents and consequently cause environmental pollution. In this study, we tested a new method which combines the chemical and physical method to reduce the amount of solvent and increase the paint removal efficiency. We found that mechanical stirring increases the paint removal efficiency in soaking stage of solvent. When solid particles as a stress transfer media are incorporated into the solvent and high mechanical stirring is applied, the paint removal efficiency is very high. It was proved that the combined method can accomplish high level of the paint removal efficiency maintaining low amount of solvent consumed.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.374-384
• /
• 2016

Concern about air pollution is gradually rising up in domestic and foreign, automotive and fuel researchers are trying to reduce vehicle exhaust emissions, through a lot of approaches, which consist of new engine design and innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research is proceeding by two main issues : exhaust emissions and PM particle emissions of gasoline vehicle. Exhaust emissions, non-regulated emissions and PM (particulate matter) particles of automotive are causing many problems which ambient pollution and harmful effects on the human body. The main particulate fraction of automotive exhaust emissions consists of small particles. Because of their small size, inhaled particles can easily penetrate deep into the lungs. The rough surfaces of these particles make it easier for them to combine with other toxins in the environment. Thus, the hazards of particle inhalation are increased. Based on the oxygenated fuel additive types (MTBE, Bio-ETBE, Bio-ethanol, Bio-butanol), this paper discussed the influence of oxygen contents on gasoline vehicle exhaust emissions, non-regulated emissions and nano-particle emissions. Also, this paper assessed exhaust emission characteristics at 2 type test modes. The test modes were FTP-75 and HWFET. All measurement items be verified less than the value of regulated emissions. It could be known difference increase and decrease by each measurement item depending on increase the oxygen contents.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.17.1-17.1
• /
• 2009

발포금속은 1948년에 Sosnik에 의해 알루미늄에 수은을 증발시키는 방법으로 발포 알루미늄을 제조한 이래, 1951년 Elliot에 의해 진보된 방식인 발포 매개체를 용탕에혼입하는 방법으로 발포금속을 제조하기 시작하였다. 현재 이들 선진국가의 생산방법 및 현황은 균질 기공의 조절, 연속주조 방식과 원가절감, 그리고 제조기술의 진보를 통하여 다양한 분야에 적용되고 있다. 그러나 실용화를 위해서는 요구특성을 만족하고 동시에 가격 경쟁력을 가진 제조기술의 보유 및 개발과 독특한 특성을활용한 새로운 적용 분야의 개척이 필요하다고 생각되며, 이를 위해 Harvard, MIT, Aachen, HMI 등 구미 유수 대학과 NASA, 미국방성등의 연구기관, ERG, 신강(新鋼) wire등 산업체를 중심으로제조 및 특성평가에 관한 기초연구와 활용방안이 활발히 모색중에 있다. 그리고 일부 자동차 생산 업체를중심으로 발포금속을 적용한 초경량, 에너지 절감형의 자동차 부품 소재,항공기 방열판 등에 대한 연구가 활발하게 진행되고 있다. 특히 금속 기체의 GASAR 공법은 Lotus 공법으로 Osaka 대학에서 개발되어 열교환기, 항공기, 방열기 등으로 응용이 확대되고 있다 국내에서 완제품생산은 실내장식용 복합패널로서 한소 프라임이 운영상의 문제로 생산을 중단하였으며, 유닉슨(주), 금강(주)에서 Batch식, 금성산업에서 Pot식이 일부 생산 및 연구가 진행되었으나 현재는 본연구실의 협조로 (주) 폼텍에서 발포패널을 주로 생산하고 있고 (주)드림메탈과 (주)아크로폼텍에서일부 생산되고, (주)동일알루미늄에서는 폐 scrap을 이용한 발포 Al 제조가 연구단계에 있다. 생기원에서는 분말 가열 흡음패널이 개발되었으나 강도와 내열성이 낮아 이들 특성을 향상시크는 연구가 진행중이다. 이들 제품은 성능상으로는 동양강판의 흡음패널과 KIMM의 필터용은연구개발이 낮은 수준이며, 본 연구팀과 공동 개발한 (주)폼텍의 복합패널은 10여 가지의 실용특허로 건축마감재로서 오히려 선진국수준을능가한 상태이다, 한편, 발포금속 기능성 개발은, 이들이 가지고 있는 우수한 특성 때문에 군수용으로부터 민수 산업용까지 전분야에 적용이 가능한 소재이므로 수요처를확장하고 있으므로 제품의 균질성, 안정성과 기능성 개발 향상을 위해 지속적이고 체계적인 연구가 필요하다고 생각된다.

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.35-43
• /
• 2004

Skid resistance is an important factor that control braking distance and secure safety by preventing slipperiness between tire and pavement surface. Decrease of skid resistance at wet condition may cause fatal traffic accidents. Dirt materials such as sand and do-icings on the road surface also can be a factor for decrease skid resistance. This study makes an investigation into influence of skid resistance between varied cement concrete pavements about surface texturing method(transverse tining, longitudinal tining, exposed aggregate surface texturing method) and wearing condition of pavement surface texture(new constructed pavement's surface, wore pavement's surface) using accelerate concrete pavement wearing tester when remains of dirt material are obtained between tire and road surface on PCC pavement. As dirt material on road surface of concrete pavement, sand, calcium chloride and old oil were used with different amount of each cases.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.76-83
• /
• 2018

This article aims to summarize the scrap recycling status of gold, silver, platinum and palladium from foreign countries by courntires and industries in order to utilize the data for securing the raw materials of the domestic urbanmining industry. The amount of gold from scrap has shown a tendency to decrease in countries other than China, which is attributed to the large imports of scrap containing gold in China. The industry demand for gold is the highest in electronic products, but demand is decreasing. The amount of scrap recycling in silver has declined in other regions compared to those in Europe, indicating that the world's overall scrap recycling volume has declined. Production and demand from scrap of platinum and palladium are mostly for catalysts and have been steadily increasing until now. However, it is expected that the amount of waste catalysts in automobiles will decrease with the increase of electric vehicle use.