• Journal of the Korea Institute of Building Construction
• /
• v.14 no.3
• /
• pp.230-236
• /
• 2014

This study was carried out to investigate the manufacturability of artificial lightweight aggregate as a way to recycle basalt powder sludge, which is a waste produced during the manufacturing process of basalt in Jeju. Powdered waste glasses and calcium carbonate are used to improve the characteristics of manufactured artificial lightweight aggregate. Especially, considering the complex factors of basalt powder sludge, powdered waste glasses, and sintering method, the amount of calcium carbonate is appropriate at the 9 wt.% in order to improve the intumescent of lightweight aggregate. Also, the amount of powdered waste glasses is effective with using less than 50 wt.% and applying the direct sintering method at the same time on decreasing the absorption of lightweight aggregate. Furthermore, in order to manufacture artificial lightweight aggregate of high quality with a low specific gravity and low water absorption, it is considered to be more effective to apply the direct sintering method after the surface of artificial lightweight aggregate is covered with powdered waste glasses.

• Magazine of RCR
• /
• v.16 no.2
• /
• pp.56-61
• /
• 2021

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.139-140
• /
• 2023

This study aims to determine the microstructural characteristics of waste glass beads, a lightweight aggregate manufactured from waste glass powder, when incorporated into mortar in order to examine its usability depending on the particle shape.

• Magazine of RCR
• /
• v.14 no.2
• /
• pp.28-34
• /
• 2019

• Magazine of RCR
• /
• v.15 no.3
• /
• pp.33-39
• /
• 2020

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.126-128
• /
• 2007

본 논문은 산업현장에서 발생하는 대표적인 폐유리를 기본 소재로 카본의 입도에 분포에 따른 발포 기공의 변화와 그에 따른 강도의 변화를 측정하고자 한다. 산업체에서 발생하는 폐유리는 그 양이 점차 늘어나고 있으며， 매립으로 인한 토양 오염 또한 심각한 상태이며 이에 활용도로 발포와 재용융의 다양한 방법으로 재활용이 이루어지고 있으며， 본 실험은 발포를 통한 여과제 또는 경량 골재， 수질 정화용 필터로 사용을 하고 있는 발포의 기본 특성 중에 카본 발포제의 입도의 영향에 대하여 좀 더 확인해 보기 위해 실험을 진행 하였다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.1
• /
• pp.74-79
• /
• 2022

In this study, the effect of a sudden decrease in internal humidity and a decrease in hydration level due to the tight internal structure of high-strength concrete and cement composites was investigated. To verify the change in the internal Si hydration, waste glass foam beads were used as a lightweight aggregate, and the internal unreacted hydrate reduction and hydrate formation tendency were identified over the mid- to long-term. Waste glass foam beads were mixed with 5, 10, and 20 %, and were used by pre-wetting. As the mixing rate of the waste glass foamed beads increased, the strength showed a tendency to decrease. In addition, when the mixing amount of pre-wetted waste glass foam beads increases inside through XRD analysis, TGA analysis, and Si NMR analysis, it is judged that the hydration degree of internal Si is different because moisture is supplied to the paste.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.146-151
• /
• 2013

In this study, the effect of addition of waste glassy slag produced from recycling of spent catalyst (denoted as waste glass hereafter) on the physical properties of artificial aggregates made of coal bottom ash and dredged soil (7 : 3 by weight base) was evaluated. Especially, the bloating behavior of artificial aggregates was analyzed by performing the relation study between the apparent density, water absorption and microstructure. The apparent density of artificial aggregates increased slightly with sintering temperature at $1050{\sim}1150^{\circ}C$, but decreased above $1150^{\circ}C$ showing bloating phenomenon. The bloating behavior of artificial aggregates was decreased so the apparent density increased with amount of waste glass added. Also, the water absorption of artificial aggregates decreased with sintering temperature. Above $1200^{\circ}C$, big fissure and much liquid were formed at the surface of artificial aggregates and these phenomena could be suppressed by increasing amount of waste glass added. The artificial aggregates fabricated in this study had an apparent density of 1.1~1.6 and water absorption of 8~22 % which meet KS requirements for the artificial lightweight aggregates.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.241-242
• /
• 2017

본 논문에서는 폐유리를 재활용하는 발포유리에 대한 기술 및 활용방법에 대한 고찰을 통해 국내에서 적용 가능한 폐유리 재활용기술에 대하여 검토하였다. 폐유리를 재활용한 발포유리는 폐유리를 분쇄한 유리 미분에 규산나트륨, 탄산칼슘, 그라파이트 등의 발포제를 첨가하여 형틀에 넣고 가열을 하면, 유리분말은 소결(sinter)상태가 되는 약 $800^{\circ}C$ 정도가 되면 녹기 시작하고, 발포제는 분해되어 $O_2$와의 반응에서 발생하는 $CO_2$ 가스에 의한 기포가 발생하여 발포유리가 형성되는 제조 방식이다. 이러한 발포유리 방식으로 제작된 판재 및 배관 형태의 불연재료는 건설 및 LGN선박용으로 널리 활용되고 있고, 인공경량 골재의 형태는 건설용 채움재 및 빗물 저류용, 정화용으로 활용되고 있다. 이러한 활용 방식은 국내에서도 충분히 적용 가능한 방식이며, 국내에서의 적용을 통해 폐기물 및 환경부하 저감 효과를 높일 수 있다.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2004.10a
• /
• pp.94.2-94.2
• /
• 2004