• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1164-1173
• /
• 1996

Treating methods and characteristics of waste from a nuclear fuel powder conversion plant were studied. To recovery or treat a trace uranium in liquid waste, the ammonium uranyl carbonate(AUC) filtrate must be heated for $CO_2$ expelling, essentially. Uranium content of final treated waste solution from fuel powder processes for a heavy water reactor(HWR) could be lowered to 1 ppm by the lime treatment after the ammonium di-uranate(ADU) precipitation by simple heating. Otherwise, in case of the waste from fuel powder processes for a pressurized light water reactor(PWR), it is result in 0.8 ppm as a form of uranium peroxide such as $UO_4{\cdot}2NH_4F$ compounds. Optimum condition was found at $101^{\circ}C$ by the simple heating method in case of HWR powder process waste. And in case of PWR powder process waste, optimum condition could be obtained by precipitating with adding hydrogen peroxide and adjusting at pH 9.5 with ammonia gas at $60^{\circ}C$ after heating the waste In order to expelling $CO_2$. As the characteristics of recovered uranium compounds, median particle size of ADU was increased with pH increasing in case of HWP waste. Also, in case of uranium proxide compound recovered from PWR waste, the property of $U_3O_8$ power obtained after thermal treatment in air atmosphere was similar to that of the powder prepared from AUC conversion plant.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.220-225
• /
• 2003

Generally, liquid radioactive wastes generated in nuclear power plant exist in powder form which do not contain moisture through the evaporating process of the Liquid Waste Management System and drying process of the Concentrated Waste Drying System. This powder form wastes are blended homogeneously with paraffin solidification agent and packed in metal drum to ensure its stability during handling and disposal. However, it was experienced that the powder form wastes were not blended homogeneously and separated into two layers in metal drum, on the other hand, a Portion of powder was adhered and solidified to the Inside parts of facility during the blending process. And the flaw of blending process above would come in case the mole ratio of Boron to Sodium in liquid radioactive wastes exceeds 0.2.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.4
• /
• pp.333-336
• /
• 1987

A liquid waste from methane fermantation was applied on Maize field to determine its effect and optimum application rate on the plant growth. A basal application of liquid waste increased a considerable amount of soil water resulting in an increase of germination. Fresh and dry yields of maize plant increased as the liquid waste application rate increased and same as plant growth. Nitrogen and phosphorus components in plant and soil showed the same tendency as the yields. The result indicates that the liquid waste is potentially useful source for a fertilizer and irrigation water.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.921-927
• /
• 1995

수지충전식 전해재생조내에서 바나듐-철-Picolinate 착화물이 함유된 모의 LOMI 제염폐액의 재생거동에 대한 공정변수의 영향을 조사하였다. 전기투석에 의해 양이온종이 제염 폐액으로부터 제거되는 재생 분리효율에 대한 전류밀도, 제염폐액 공급유량 및 재생조내 수지층두께 등 공정변수의 영향은 바나듐이온이 가장 크게 받는다. 공정변수의 영향을 총괄 파라미터인 공정변수비 $\alpha$로 정의하여 나타낼 때 재생 분리효율 95%이상을 얻기 위해서는 $\alpha$가 0.2 이하로 유지되어야 한다. LOMI 제염폐액의 재생시 전기투석 flux는 공정변수비, $\alpha$값이 증가함에 따라 철이온이 바나듐이온에 비해 더욱 커지는 경향을 보였다. 재생종료 후 발생되는 음극폐액내 철 및 코발트 등 방사성이온종은 음극액의 초기 수소이온 농도를 조절하면 침전제의 첨가 얼이 음극반응에 의해 음극액의 pH를 산성에서 알카리성으로 바꿀 수 있어, 수산화물 형태의 침전물 입자로 만들어 쉽게 제거할 수 있다. 재생시 바나듐이온은 대부분 $V^{III}$(Pic)$_2$$^{+}$ 착화물형태로 전기투석된다. 음극액으로 formate용액을 사용하면 철 및 코발트 등 방사성이온종을 제거한 음극액은 농축된 LOMI제염제로 회수하여 필요시 산화가를 조정한 후 재생된 착화제와 혼합하여 제염제로 재사용할 수 있어, 더욱 효과적으로 제염폐액을 재생하는 향상된 재생방법이다.다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.86-88
• /
• 2014

니켈도금폐액은 재자원화되지 못하고 대부분 외부로 위탁 폐수처리되고 있으며, 고가의 금속인 니켈을 회수되지 못하고 버려지고 있는 실정이다. 이에 니켈도금폐액으로부터 니켈을 회수하고, 회수된 니켈을 이용하여 니켈화합물을 제조하여 니켈도금폐액을 재자원하는 기술을 개발하였다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.2
• /
• pp.133-137
• /
• 1986

A liquid waste from methane fermentation was applied on a pasture of grass-legume mixtures to determine its effect and optimum application rate on plant growth. Fresh yields of the pasture increased as the liquid waste application rate increased, especially markedly increased when the 42 ton/10a of waste was applied only. The NPK components in soil and plant was also higher in the plots of liquid application than that of control. Therefore, the optimum application rate of liquid waste was found to be 42 ton/10a. This result indicates that the liquid waste is potentially useful source for a fertilizer and irrigation water.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.375-380
• /
• 1997

모의 방사성 세탁폐액을 제조하여 오존에 의한 세제 파괴를 확인하고 활성탄 및 이온교환수지를 이용하여 세제 및 Co, Cs 제거율을 조사하였으며 모의 방사성 세탁폐액을 오존으로 부분적으로 산화ㆍ파괴시킨후 활성탄 및 이온교환수지에 의한 흡착 및 이온교환 실험을 수행하여 오존의 세제 파괴가 방사성 물질 제거에 미치는 영향을 조사하였다. 오존에 의해 세제는 75% 정도 제거될 수 있었고 활성탄으로 방사성 모의세탁폐액을 처리할 때 세제농도가 증가하면 방사성 핵종 제거율이 감소하였다. 이온교환수지로 세제를 제거할 때 성취가능 제거율은 Co의 경우 99% 이상이었으며, 세제 존재시 방사성 Co 및 Cs 제거율은 감소하며, 방사성 모의세탁폐액을 오존으로 조사후 활성탄과 이온교환수지로 방사성 핵종을 제거할 때 그 제거율은 거의 변화가 없었다. 이상과 같은 실험 결과로부터 오존으로 부분적으로 산화시켜 활성탄의 세제 제거효율을 최대화하고, 역삼투막에 의한 방사성 핵종을 제거하며 이온교환수지로 잔류 방사성 핵종을 완전히 처리할 수 있는 복합 공정을 도출하였다.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.274-279
• /
• 2000

A Saccharomyces cerevisiae isolated from a feed additive yeast product was cultivated in a Korean paper digestion wastewater in order to investigate the possibility of using it as substrate for the yeast. The yeast couldn't grow in the wastewater. It could grow in the wastewater diluted and the optimum dilution rate was 7.5 In batch cultivation with the jar fermenter the maximum total cell count was $1.34{\times}107/mL$ was obtained by the addition of undiluted digestion wastewater. By adding $(NH_4)_2S0_4 and KH_2P0_4$together with the undiluted wastewater the maximum cell concentration could be obtained faster.

• Resources Recycling
• /
• v.10 no.6
• /
• pp.15-21
• /
• 2001

Shape-controlled copper oxides have been recovered from copper-containing waste etchant by neutralization with alkalihydroxide. Large amount of copper-containing waste etchant is generated from Printed Circuit Board industry. In an environmental and economic point of view, retrieve of the valuable natural resource from the waste is important. In recycling process of copper oxide from the waste etchant, reaction temperature controls shapes and sizes of the products. Copper oxide recovered below reaction temperature $40^{\circ}C$ was of a needle shape, while copper oxide comes in a platy shape above $40 ^{\circ}C$ . Physical properties of samples have been characterized using SEM, XRD, TGA and Atomic absorption spectroscopy.

• Resources Recycling
• /
• v.12 no.2
• /
• pp.3-10
• /
• 2003

Copper oxychloride used as an agricultural fungicide has been recovered from copper-containing waste etchant by the neutralization with alkali hydroxides. Large amount of copper-containing waste etchant is generated from Printed Circuit Board industry. In an environmental and economic point of view, retrieve of the valuable natural resource from the waste is important. Recycling process of copper oxychloride from the waste etchant is discovered through the our study. In the range of reaction temp. 2$0^{\circ}C$-4$0^{\circ}C$, pH 5-7, pure copper oxychloride was able to prepare and the yield of copper oxychloride was higher than 95%. Physical properties of the sample have been characterized using SEM, XRD, TGA, ICP and Atomic absorption spectroscopy.