• Monthly Korean Chicken
• /
• v.2 no.11 s.17
• /
• pp.2-8
• /
• 1996

배합사료 부가세 전면 영세율 적용방침 - 식품위해요소 중점 관리제도 - '식중독유발 닭고기 살모넬라는 극히 일부' - `97년 닭 MMA 물량 입찰 - 계열농가 입식물량 $20{\%}$ 감축키로 - 미국 옥수수 등 사료곡물 생산량 풍작 - 국내 닭고기 생산비 미국의 2배 - 닭고기 소비행태 조사보고서 발간 - 주한 외교대사관 부인 초청 `96국제 닭고기요리 경연대회 개최 - 육계업계, 수매비축자금지원 절실 - `97년 미국 가금육산업 낮은 성장률 예측 브라질, 사료가격 폭등 계열농가는 증가추세 - 영, MOYPARK사 미국 OSI에 팔려 - 닭고기 소비촉진홍보사업 활발히 전개 - 계열주체와 계약조건 개선 희망 - 수입축산물 불합격 증가 - 육계실용계 병아리 16만수 폐기처분 - 러시아 농업지원 강화

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.242-242
• /
• 2004

원자력발전소의 운전과정에서 계획적 혹은 비계획적으로 방출되는 미량의 입자상 방사성 물질들은 대부분 원전 부지내 토양에 침적되게 된다. 이러한 과정 속에서 오염토양이 발생하게 되면 수거되어 단순 격리관리하고 있는 실정이지만 앞으로 원전의 해체과정 등으로 인한 오염토양이 상당량 발생할 것으로 예상되기 때문에 적절한 제염을 통하여 폐기물량을 최소화시킬 필요가 있다. 이를 위해 오염토양 제염공정으로 물을 이용한 토양세척법을 선정하여 제염장치를 제작하였으며 실증시험을 수행하였다.(중략)

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.31 no.9
• /
• pp.16-23
• /
• 2002

현재 우리나라는 1980년대 후반부터 도시폐기물 소각시설을 설치하기 시작하여 전국적으로 20 여곳의 대형 소각장이 가동되고 있으며 대기오염 방지 기술도 발전에 발전을 거듭하여 불과 10 여년 동안에 선진국 수준의 대기오염 배출기준을 만족하는데 아무 문제가 없을 정도로 되었다. 그러나 소각후 발생 하는 소각재의 경우 비산재는 고형화등의 처리 후 매립하고 바닥재는 별도 처리없이 매립하는 실정이어서 매립 후 시간이 흐를수록 매립된 소각재에서 용출되는 다이옥신과 소각재 중에 포함된 중금속 등에 의한 토양오염과 수질오염의 우려가 남아 있는 것이 사실이다. 소각후 남는 소각재는 폐기물량의 약 15 %, 비산재는 약 1.5 % 정도 발생하는 것으로 볼 때 매립은, 특히 다음 세대에 유산으로 남겨진다는 점에서 더 이상 적절하지 않은 해결책으로 생각되며 유럽과 일본 등 선진국에서는 이미 이와 같은 소각재에 대한 무해화 처리기술이 개발되고 속속 상용화되고 있으므로 우리나라도 하루빨리 열분해용융시설등 신기술을 개발하거나 도입하여 세계적 환경 기술경쟁 에서 선진국과 어깨를 나란히 함은 물론 청정한 국토를 후손에게 물려줄 수 있도록 하는 대책이 강구되어 야 할 것이다. 본 고에서는 폐기물 처리기술의 세계 적 동향을 살펴보고 폐기물의 완전 자원화에 성공한 대우 써모셀렉트 열분해용융 기술의 특성에 대해 소개하고자 한다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.130-134
• /
• 2003

The quantity of solid waste produced during HANARO operation for the years from 1996 to 2002 has been investigated and the interrelation with the reactor power output has been analysed. The waste amount produced during this period was $69, 598{\ell}$ and the processing expense was 1, 878, 000 won. The waste amount and processing expense per reactor power output are $3.01{\ell}/MWD$ and 811 won/MWD, respectively. A dry equipment for the spent resin was developed and the spent resin volume has been reduced by about 40% by using it.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.135-140
• /
• 2003

The quantity of liquid waste produced during HANARO operation for the years from 1996 to 2002 has been investigated and the interrelation with the reactor power output has been analysed. The waste amount produced during this period was $263, 530{\ell}$ and the processing expense was 81, 690, 000 won. The waste amount and processing expense per reactor power output are $11.38{\ell}/MWD$ and 157 won/MWD, respectively. The waste has been reduced by improving repair work procedure and experiment process in the reactor hall.

• Journal of Korea Foundry Society
• /
• v.43 no.5
• /
• pp.260-263
• /
• 2023

이 보고서에서는 무기 공정에서의 무기 인공 재생 모래의 특성을 중심으로 다음과 같이 정리할 수 있다. 1) ICP 발광 분광 분석을 통한 재생 모래의 Na⁺ 용출량, TP 휨강도 및 충전 밀동에는 높은 상관 관계가 확인되었다. 2) 현행 재생 방법 대비, 습식 연마 처리를 첨가함으로써 잔류 점결재가 제거되고 Na+ 용출량이 저감된 결과, 재생 모래의 TP 휨강도를 보다 개선 가능한 것이 확인되었다. 3) 재생 처리 공정 순서를 건식 연마 → 습식 연마 → 배소 처리로 함으로써, 가장 Na⁺ 용출량이 낮고, 높은 휨강도를 얻을 수 있는 것이 확인되었다. 4) 습식 연마 단계를 거치지 않고 배소 처리 온도와 처리 시간을 궁리함으로써 충분한 품질의 재생 모래를 얻을 수 있는 가능성이 시사되었다. 마지막으로, 무기 공정은 유기 공정에 비해 압도적으로 냄새가 적고 생산성이 높으며 인공 모래와의 병용을 통한 재생 처리시의 폐기물량 저감, 주조품의 고품질화 등 이점이 기대되는 공정이다.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.809-820
• /
• 2017

Efficient management of large-size wastes generated from disasters etc. is always in demand. Large-size wastes are closely connected to the environment, producing adverse effects on the air quality, water quality, living environment and so on. When large-size wastes are generated, we must be able to estimate the generated amount in order to transfer them to a temporary trans-shipment site, or to properly treat them. Currently, we estimate the amount of generated large-size wastes by using satellite images or unit measure for wastes; however, the accuracy of such estimations have been constantly questioned. Therefore, the present study was performed to establish three-dimensional spatial information based on UAS, to measure the amount of waste, and to evaluate the accuracy of the measurement. A measurement was made at a waste site by using UAS, and the X, Y, Z RMSE values of the three-dimensional spatial information were found to be 0.022 m, 0.023 m, and 0.14 m, all of which show relatively high accuracy. The amount of waste measured using these values was computed to be approximately $4,273,400m^3$. In addition, the amount of waste at the same site was measured by using Terrestrial LiDAR, which is used for the precise measurement of geographical features, cultural properties and the like. The resulting value was $4,274,188m^3$, which is not significantly different from the amount of waste computed by using UAS. Thus, the possibility of measuring the amount of waste using UAS was confirmed, and UAS-based measurement is believed to be useful for environmental control with respect to disaster wastes, large-size wastes, and the like.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.1
• /
• pp.45-53
• /
• 2015

Since the commercial operation of Kori Unit #1 nuclear power plant(NPP) started in 1978, 23 units at present are operating in Korea. Radioactive wastes will be steadily generated from these units and accumulated. In addition, the life-extension of NPPs, construction of new NPPs and decontamination and decommissioning research facilities will cause radioactive wastes to increase. Recently, Korea has revised the new classification criteria as was proposed by IAEA. According to the revised classification criteria, low-level, very-low-level and exempt waste are estimated to about 98% of total disposal amount. In this paper, current status of overseas cases and disposal method with new classification criteria are analyzed to propose the most reasonable method for estimating the amount of decommissioning waste when applying the new criteria.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.743-746
• /
• 2007

Now, in a domestic country, the rebuilding and redevelopment of existing houses has been rapidly increasing with an economic growth and the improvement of living condition. The percentage of C&D waste among generating waste in domestic is more and more increasing. Accordingly, Our government or company are doing much effort to decrease the C&D waste. But now, we can not find any results about system development for estimating and managing rightly the C&D waste quantity. Now, much social cost are increasing for reason of the institutional inertia for forecasting quantity of C&D waste. Therefore, This study suggest some methods be able to estimate it of apartment easily. The methods are composed with utilization of a basic unit, a CAD drawing and a 3D object. Each module can be also used individually according to the purpose of a user.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.621-626
• /
• 2021

In this study, data on the study site for apartment construction was acquired, and the quantity of construction waste was calculated using a drone and mobile 3D laser scanner. The accuracy of the drone was 0.034 to 0.064m in the horizontal and vertical directions, respectively, and the mobile 3D Laser Scanner showed an accuracy of 0.018 to 0.049m in the horizontal direction, respectively. These results suggest that it is possible to construct spatial information using a drone and mobile 3D laser scanner with a value within the allowable accuracy of 1:1,000 digital terrain. The volume of construction waste calculated using the mobile 3D laser scanner data was 70,797㎥. It was possible to calculate the volume on the side of the building or some facilities that appeared as shaded areas in the drone outcomes. In addition, modeling was performed for view analysis of the apartments scheduled to be constructed and the terrain-based modeling results of the surrounding buildings. In the future, data construction and accuracy evaluation using mobile 3D laser scanners will be conducted. In addition, additional research comparing existing methods and work processes will be carried out, and the efficiency of mobile 3D laser scanners in the field of spatial information construction can be presented.