• Journal of the Korean Geographical Society
• /
• v.43 no.6
• /
• pp.1002-1015
• /
• 2008

We investigate the potential of digital elevation model and multivariate geostatistical kriging in mapping of temperature and rainfall based on sparse weather station observations. By using elevation data which have reasonable correlation with temperature and rainfall, and are exhaustively sampled in the study area, we try to generate spatial distributions of temperature and rainfall which well reflect topographic effects and have less smoothing effects. To illustrate the applicability of this approach, we carried out a case study of Jeju island using observation data acquired in January, April, August, and October, 2005. From the case study results, accounting for elevation via colocated cokriging could reflect detailed topographic characteristics in the study area with less smoothing effects. Colocated cokriging also showed much improved prediction capability, compared to that of traditional univariate ordinary kriging. According to the increase of the magnitude of correlation between temperature or rainfall and elevation, much improved prediction capability could be obtained. The decrease of relative nugget effects also resulted in the improvement of prediction capability.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.4
• /
• pp.203-212
• /
• 2002

This study was conducted to remove the urban heat island effects embedded in the interpolated surfaces of daily minimum temperature in the Korean Peninsula. Fifty six standard weather stations are usually used to generate the gridded temperature surface in South Korea. Since most of the weather stations are located in heavily populated and urbanized areas, the observed minimum temperature data are contaminated with the so-called urban heat island effect. Without an appropriate correction, temperature estimates over rural area or forests might deviate significantly from the actual values. We simulated the spatial pattern of population distribution within any single population reporting district (city or country) by allocating the reported population to the "urban" pixels of a land cover map with a 30 by 30 m spacing. By using this "digital population model" (DPM), we can simulate the horizontal diffusion of urban effect, which is not possible with the spatially discontinuous nature of the population statistics fer each city or county. The temperature estimation error from the existing interpolation scheme, which considers both the distance and the altitude effects, was regressed to the DPMs smoothed at 5 different scales, i.e., the radial extent of 0.5, 1.5, 2.5, 3.5 and 5.0 km. Optimum regression models were used in conjunction with the distance-altitude interpolation to predict monthly normals of daily minimum temperature in South Korea far 1971-2000 period. Cross validation showed around 50% reduction in terms of RMSE and MAE over all months compared with those by the conventional method.conventional method.

• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.21-28
• /
• 2006

In a face detection system based on template matching, histogram equalization or log transform is applied to an input image for the intensity normalization and the image improvement. It is known that they are noneffective in improving an image with intensity distortion by illumination variation. In this paper, we propose an efficient image improvement method using a simple regression analysis combined with a bilateral symmetry average for images with intensity distortion by illumination variation. Experimental results show that our method delivers the detection performance better than previous methods and also remarkably reduces the number of face candidates.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.913-915
• /
• 2005

임의의 영상에서 얼굴을 검출하는 것은 얼굴을 인식하는데 있어서 선행되어야 할 필수과정이다. 본 논문은 조명의 변화가 심한 컬러영상에서 얼굴을 검출하는 것을 목적으로 한다. 본 논문은 기존의 기하학적 밝기분포 마스크만을 사용한 방법이 조명 변화에 취약한 단점을 보완하는데 중점을 두었다. 히스토그램 평활화(Histogram Equalization : HE)와 감마 크기 보정 (Gamma Intensity Correction : GIC) 방법을 이용해서 조명에 대한 간섭을 줄인 후, 영상 전체에서 피부 영역을 추출하고 이어서 눈 후보들을 검출한다. 검출된 눈 후보들로부터 기하학적 밝기분포 마스크를 적용하여 효과적으로 얼굴 후보들을 찾을 수 있고, 이렇게 찾아진 얼굴 후보들은 주성분분석법(Principal Component Analysis : PCA)를 이용해서 얼굴인지 여부를 판별하게 된다. 본 알고리즘은 조명 밝기 등으로 인해 검출률이 떨어졌던 단점을 보완할 수 있었고, 향후 얼굴 검출 분야에 있어서도 활용 가치가 있을 것으로 생각된다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.444-449
• /
• 2002

1. 시료의 흡광도는 입도가 커짐에 따라 전체 파장 영역에 걸쳐 증가하는 경향을 보였다. 가시광 영역에서는 입도 보다도 색상의 영향이 큰 것으로 나타났다. 2. 시료의 함수율과 각 파장에서의 흡광도 사이의 상관관계는 550~950nm 영역에서는 상관계수가 0.53이하로 작았으며, 물의 흡수파장대역인 1430 nm 부근에서는 0.85~0.87로 높게 나타났다. 3. 각 시료들의 반사 스펙트럼을 이용하여 세 가지 파장 영역에 대해 PLS회귀모델과 MLR 모델에 의한 함수율 예측 모델을 개발하였다. 모든 시료에서 PLS회귀모델이 MLR 회귀 모델보다 예측성능이 우수하였다. 4. PLS회귀 모델에서 전처리 효과를 분석한 결과, 시료의 입도에 따른 흡광도의 차이를 보정하기 위해 평활화, 미분, MSC, SNV 등의 전처리가 필요한 것으로 판단되었다. 5. 전체시료에 대해 함수율 예측을 위한 PLS회귀모델을 개발한 결과 400~2500nm영역에서의 개발된 모델의 예측성능은 $R^2$=0.9986, SEP=0.2166, 900~1700nm영역에서의 모델은 $R^2$=0.9985, SEP=0.2233이었으며 550~950nm 영역에서의 모델은 $R^2$=0.9838, SEP=0.7405로 나타났다. 각 시료의 종류별로 회귀모델을 개발할 경우 상기 결과보다 SEP가 더욱 작게 나타났다. 6. 이 연구 결과에 의하면 현재 시판되고 있는 실시간 분광기를 이용할 경우 시료의 입도에 무관한 온라인 함수율 측정장치의 개발이 가능할 것으로 판단된다.

• Journal of the Korean Society of Radiology
• /
• v.17 no.5
• /
• pp.751-759
• /
• 2023

Breast ultrasonography is difficult to image in fatty breasts and to find micro-calcification, but the discovery of micro-calcification is very important for breast cancer screening. Among the color Doppler artifact of ultrasound, twinkle artifact mainly occur on strong reflectors such as stones or calcification in images, and evaluation methods using them are clinically being used. In this study, we are conducting experiments on the color Doppler settings of ultrasound equipment, such as repetition frequency, ensemble, persist, wall filtering, smoothing, linear density, and dissociation value, by producing a breast simulation phantom using the largest amount of calcium phosphate among breast implants. The purpose of this study was to improve the contrast of twinkle artifact in breast ultrasound examinations and to maximize their use in clinical practice. As a result, the pulse repetition frequency occurred in the range of 3.6 kHz to 7.2 kHz, and did not occur above 10.5 kHz. For ensembles, twinkle artifact occurred in all sizes of calcification under low conditions, and in threshold settings, the twinkle artifact increased slightly only under 80 to 100 conditions, and did not occur in 1 mm size calcification. Persist, wall filter, smoothing, and line density settings did not have much meaning in the setting variable because conditions did not increase by condition, and pulse repetition frequency, ensemble, and thresholds had the greatest impact on the twinkling artifact image. This study is expected to help examiners select optimal conditions to effectively increase twinkle artifact by adjusting color Doppler settings.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.195-201
• /
• 2019

Long caisson breakwaters can improve the structural safety of a caisson due to the wave dispersion effect which reduces the average wave force acting on one caisson. However, in order to make long caissons, there are many manufacturing and construction limitations. Recently, interlocking caisson systems, which are to form a long caisson by interlocking individual caissons with adjacent caissons, have been much attention. In the present study, a interlocking caisson system with shear-keys was proposed and the wave dispersion effect according to the shear-key was evaluated analytically. As a result, (1) Because of the asymmetric shape of the interlocking caisson, the structure behavior and the wave dispersion effect of one are also asymmetric. (2) The wave dispersion effect is more influenced by the distribution and characteristics of wave acting on each caisson rather than the shape of the shear-key such as shear angle, height, shear length ratio. (3) The interlocking caisson breakwater is almost the same behavior and wave dispersion effect as a fully integrated breakwater.

• Journal of Biomedical Engineering Research
• /
• v.19 no.6
• /
• pp.551-562
• /
• 1998

Amultiresolution filtering algorithm based on the physical SPECT lesion detachability provides and optimal solution for SPECT reconstruction problem. Related to the previous study, we estimated the SPECT lesion detection capability by m minimum detectable lesion sizes (MDLSs), and generated m reconstruction filters which are designed to maximize the smoothing effect at a fixed MDLS-dependent resolution level $\frac{MDLS}{4\sqrt{2In2}}$. The proposed multiresolution filtering algorithm used a coarse-to-fine approach for the m-level resolution filter images obtained from these m filters for a given projection image. First, the local homogeneity is determined for every pixel of the filter images, by comparing the local variance value computed in a window centered at the pixel and the mode determined from the distribution of the local variances. Based on the local homogeneity, the pixels declared as homogeneous are chosen from the filter image of the lowest resolution, and for the other pixels the same process is repeated for the higher resolution filter images. For the non-homogeneous pixels after this pixels after this repetition process ends, the pixel values of the highest resolution filter image are substituted. From the results of the simulated experiments, the proposed multiresolution filtering algorithm showed a strong smoothing effect in the homogeneous regions and a significant resolution improvement near the edge regions of the projection images, and so produced good adaptability effects in the reconstructed images.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.4
• /
• pp.49-55
• /
• 2010

Cast shadow caused by an illumination condition can produce troublesome effects for face recognition system using reflectance image. Consequently, we need to separate cast shadow area from feature area for improvement of recognition accuracy. A Bilateral filter smooths image while preserving edges, by means of a nonlinear combination of nearby pixel values. Processing such characteristics, this method is suited to our purpose in illumination estimation process based on Retinex. Therefore, in this paper, we propose a new illumination normalization method based on the Bilateral filter in face images. The proposed method produces a reflectance image that is preserved relatively exact cast shadow area, because coefficient of filter is designed to multiply proximity and discontinuity of pixels in input image. Performance of our method is measured by a recognition accuracy of principle component analysis(PCA) and evaluated to compare with other conventional illumination normalization methods.

• Journal of Broadcast Engineering
• /
• v.22 no.5
• /
• pp.608-617
• /
• 2017

Methods of contrast enhancement have problem such as side effect of over-enhancement with non-gaussian histogram distribution, tradeoff enhancement efficiency against brightness preserving. In order to enhance contrast at various histogram distribution, segmentation to region with gaussian distribution and then enhance contrast each region. First, we segment an image into several regions using GMM(Gaussian Mixture Model)fitting by that k-mean clustering and EM(Expectation-Maximization) in $L^*a^*b^*$ color space. As a result region segmentation, we get the region map and probability map. Then we apply local contrast enhancement algorithm that mean shift to minimum overlapping of each region and preserve brightness histogram equalization. Experiment result show that proposed region based contrast enhancement method compare to the conventional method as AMBE(AbsoluteMean Brightness Error) and AE(Average Entropy), brightness is maintained and represented detail information.