• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.7
• /
• pp.701-708
• /
• 2011

Natural convection heat transfers on inclined flat plates were measured for Grashof numbers of $8.06{\times}10^7$ and $3.45{\times}10^9$ by using a copper sulfate electroplating system. The inclinations of the plates were varied from upward-facing horizontal to downward-facing horizontal. Test results for the downward-facing plate agree well with the existing theory that the Nusselt number can be calculated by replacing gravitational acceleration, g with g $cos{\theta}$ in the heat transfer correlation for the vertical plate. The natural convection flows for the upward-facing plate follow two distinct flow regimes: boundary layer regime and flow separation regime. The copper plating pattern for the upward-facing plates clearly reveals the flow separation points.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.72-85
• /
• 2001

A study for the structural strength evaluation on the doubler plate subjected to the biaxial in-plane compression has been performed through the systematic evaluation process. In order to estimate the proper static strength of doubler plate, elasto-plastic large deflection analysis is introduced including the contact effect between main plate and doubler. The characteristics of stiffness and strength variation are discussed based on their results. A1so, in order to compare the doubler structure with the original strength of main plate without doubler, a simple formula for the evaluation of the equivalent flat plate thickness is derived based on the additional series analysis of flat plate structure. Using this derived equation, the thickness change of a equivalent flat plate is analyzed according to the variation of various design parameters of doubler plate and some design guides are suggested in order to maintain the original strength of main plate without doubler reinforcement. Finally, correlation between derived equivalent flat plate formula and the developed buckling strength formulas by author et a1. is discovered and these relations are formulated for the future development of simple strength evaluation formula of doubler plate structure.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.92-105
• /
• 2000

A study for the structural strength evaluation on the slender doubler plate has been performed through the systematic evaluation process. In order to estimate the proper static strength of doubler plate subjected to the longitudinal in-plane compression, elasto-plastic large deflection analysis is introduced including the contact effect between main plate and doubler. The characteristics of stiffness and strength variation are discussed based on their results. Also, in order to compare the doubler structure with the original strength of main plate without doubler, a simple formula for the evaluation of the equivalent flat plate thickness is derived based on the additional series analysis of flat plate structure. Using this derived equation, the thickness change of a equivalent flat plate is analyzed according to the variation of various design parameters of doubler plate and some design guides are suggested in order to maintain the original strength of main plate without doubler reinforcement. Finally, correlation between derived equivalent flat plate formula and the developed buckling strength formulas by author et al. is discovered and these relations are formulated for the future development of simple strength evaluation formula of doubler plate structure.

• The Journal of the Korea Contents Association
• /
• v.19 no.4
• /
• pp.1-11
• /
• 2019

Recently, the importance of not only financial factors from financial statements but also non-financial factors such as consumers' evaluation and loyalty to game content is more emphasized when assessing the value of game companies. In this study, we suggest the brand reputation index as an appropriate measure of a game company's valuation and examine the effect of the brand reputation on game companies' stock price using the observations of Korean major 30 game companies. From the empirical results, we find that there is a significantly positive association between the brand reputation index and the game companies' stock price. This explains that the brand reputation of game companies can directly affect their firm value. The findings are expected to contribute to capital markets and academia as they have presented empirical evidence of the importance of brand reputation as a non-financial measure for the valuation of game companies.

• Journal of the Korean Society for Railway
• /
• v.16 no.5
• /
• pp.386-393
• /
• 2013

In this study, the so-called repeated plate load bearing test (RPBT) used to get $E_{v2}$ values in order to check the degree of compaction of subgrade, and to get design parameters for determining the thickness of the trackbed foundation, is investigated. The test procedure of the RPBT method is scrutinized in detail. $E_{v2}$ values obtained from the field were verified in order to check the reliability of the test data. The $E_{v2}$ values obtained from high-speed rail construction sites were compared to converted modulus values obtained from resonant column (RC) test results. For these tests, medium-size samples composed of the same soils from the field were used after analyzing stress and strain levels existing in the soil below the repeated loading plates. Finite element analyses, using the PLAXIS and ABAQUS programs, were performed in order to investigate the impact of the strain influence coefficient. This was done by getting newly computed $I_z$ to get the precise strain level predicted on the subgrade surface in the full track structure; under wheel loading. It was verified that it is necessary to use precise loading steps to construct nonlinear load-settlement curves from RPBT in order to get correct $E_{v2}$ values at the proper strain levels.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.4
• /
• pp.33-38
• /
• 2018

The internal erosion due to poor compaction of the material was the main cause of collapse of the embankment in Korea. The assessment of the compaction state of the dam body was a very important check in the safety diagnosis of the embankment. In this study, the correlation between dynamic cone penetration test and plate loading test which is the most typical compaction evaluation technique was analyzed to verify the applicability of the dynamic cone penetration test in evaluating the compaction state of the dam body. The standard penetration tests were carried out six times to define soil properties and depth of the test site. The spatial distributions were obtained by the Kriging method after 15 times of plate loading tests and 47 times of dynamic cone penetration tests. The Pearson correlation coefficient between the spatial distribution of the plate loading test and the dynamic cone penetration test spatial distribution at the constant penetration depth was calculated. The load distribution in the plate loading test and the blow counts at penetration depths of 5 cm, 10 cm and 15 cm in the dynamic cone penetration test showed a weak positive correlation.

• Korean journal of food and cookery science
• /
• v.16 no.2
• /
• pp.195-201
• /
• 2000

An investigation was conducted to evaluate the hygienic status of university foodservice operation by using conventional swabbing technique plus standard plate count and ATP bioluminescence assay. The results of the study were as follows: 1) For all kitchen boards, knives, feeding trays, and dish towels tested, there was an overall agreement at 84.7% level between the results obtained using ATP bioluminescence and plate count when using a pass/fail cut-off of 3$\times$ control values for ATP assay and 40 CFU(colony forming unit)/㎠ for plate count. 2) The agrement rate between ATP assay and standard plate count was 87.5% for the samples before use, 29.2% for those during use, and 42.7% for those after cleaning and sanitizing. 3) The plate counts of three university foodservice operations for kitchen board, kitchen knife, feeding tray and dish towel were within the acceptable limits when tested before using. However, none of them were within the acceptable limits when tested during using and after cleaning and sanitizing. 4) Above results suggested that an immediate action needs to be taken to reduce the potential danger of cross-contamination and also effective sanitary control methods needs to be developed to improve the sanitary condition.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.771-774
• /
• 2012

세계적으로 온라인 평판 분석 서비스의 개발 및 SNS 이슈 분석과 영향도 평가 등의 서비스 이용추세가 증가하고 있다. 현재 SNS나 소셜미디어등 온라인을 통해 고객들의 서비스에 대한 정성적인 평가 및 요구사항이 실시간으로 표현되고 있으며, 서비스에 대한 부정적인 여론이 확산되기 전에 능동적으로 대응할 수 있는 시스템의 필요성이 기업들에게 시급히 요구되고 있다. 이러한 시스템 개발을 위해서 선행되어야 할 기술개발 요건으로 B2C 산업의 특성에 기반한 다양한 분석 주제를 설정하고, 이에 맞는 다양한 동일 산업군에 대한 시스템 적용을 위한 분류 표준화가 필수이다. 본 연구에서는 이를 수행하기 위해서 대표 산업군을 선정하여 기존 업무 분류 체계를 기반으로 한 온라인상의 고객 피드백 분류 및 표준화 수립에 대한 방법을 제안한다.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.4
• /
• pp.70-76
• /
• 2012

The independent component analysis (ICA) technique is a source identification method that uses statistical independence to separate source signals from measured signals. It has been successfully applied to various fields such as medical care and communication. In this study, the ICA technique was adopted to analyze the vibration source contribution of plate structures. The theory of the ICA technique is introduced and the procedure of the vibration source contribution analysis based on the ICA technique is proposed. To investigate the applicability of the proposed method to plate structures, numerical examples are presented for a rectangular plate under harmonic force excitations. The results show that the proposed method could become an effective tool for the vibration source contribution analysis of a plate structure.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.420-423
• /
• 2016

최근 여론조사 분야에서 빅데이터 분석 기법이 널리 활용되고 있다. 기업에서는 최근 출시된 제품에 대한 선호도를 조사하기 위해 기존의 설문조사나 전문가의 의견을 단순 취합하는 것이 아니라, 온라인상에 존재하는 다양한 종류의 데이터를 수집하고 분석하여 제품에 대한 대중의 기호를 정확히 파악할 수 있는 방안이 필요하다. 본 연구에서는 빅데이터로부터 제품의 평판을 자동으로 찾아내는 텍스트 마이닝 방안을 제안하고, 소나타 자동차를 중심으로 제안 방안의 효율성을 평가하고 실험 결과를 자세히 분석한다.