• 한국도로학회:학술대회논문집
• /
• 2010.09a
• /
• pp.339-342
• /
• 2010

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.89-96
• /
• 2007

농업 비점오염원으로부터의 수질 보전이나 수자원 관리는 유역단위로 하는 것이 세계적 추세이며, 지형이 복잡한 우리나라에서는 더욱 효율적일 수 있다. 유역은 물이나 기타 물질들이 모여 강이나 더 큰 수계로 흘러드는 지표수의 범위라 표현할 수 있으며 그 범위를 정함에 따라 매우 중요한 의미를 지니게 된다. 특히, 강우에 따른 수자원의 유입과 유출이 토양을 통해 발생함에도 불구하고 기존의 유역단위 구분이 토양의 특성을 전혀 반영하지 못하고 있는 우리의 현실은 효율적 관리를 위한 유역단위 구분의 큰 단점으로 작용해왔다. 따라서, 농업적 관리뿐만 아니라 수질관리 및 수자원 관리를 위해서도 유역단위 특히, 소유역을 토양특성이 포괄하는 체계적 단위로 분류할 필요성이 있다. 토양학에서는 동일한 모재에서 유래된 일련의 토양이 미세지형에 따라 연속적으로 분포된 것을 Soil Catena(토양연접군)라고 한다. 이 토양연접군을 위주로 토양을 분류하게 되면 수문이나 기상현상 등의 주요 매질인 토양을 그룹화할 수 있는 가능성을 얻게 되고 이런 그룹화는 유역을 수계 위주의 유역군이 아닌 동일특성이나 유사특성을 나타낼 수 있는 유역군으로 분류가 가능하도록 유도할 것이므로, 이런 분류는 토양을 포함하는 다양한 수문모형의 적용성을 확대해 합리적 수자원 관리에 도움이 될 것이며 수자원 환경에 영향을 미치는 오염물질 관리에 대한 유역단위 보편성을 확보하고 농업에서의 최적관리를 가능하게 할 것이다. 우리나라 유역 세분화는 토양조사가 되어 있는 지역에만 한정해 분류에 이용했다. 대유역은 15개로 구분하였으며(그림 1), 중유역은 117개 소유역은 1,108개를 분석에 사용했다. 유역의 만곡도(하천의 실제길이 하천의 직선장) 산림의 비율(표준유역내 임지토양의 면적 / 소유역의 면적), 평탄지의 비율(표준유역내 평탄지의 비율 / 소유역의 면적), 다른 소유역으로부터의 유입이 있는지의 여부 등을 기본자료로 하였다. 이렇게 구분된 소유역은 유형적으로 보면 유사한 지형 및 토양특성에 따라 그룹화하였다. 유역내 평탄지가 유역면적의 25% 이상을 차지하는 지역을 평야지로 구분하며, 유역내 평탄지가 25% 미만이고 경사지가 45% 이상인 중간지, 유역내 평탄지가 25% 미만이고, 경사지가 45% 미만인 곳을 산간지로 구분하였다. 경사지는 산악지와 구릉지를 제외하여 모든 소유역을 모암 유래토양특성에 따라 16유형, 농업지대에 따라 3개의 유형으로 나눌 수 있으며 총 개의 유형으로 분류하였다. 이런 분류의 토대위에 향후 필요분야마다 구분이 가능한 기후특성을 포함시킨다면 최종적으로는 모든 것이 해설될 수 있는 유역군으로 만들 수 있을 것이다. 즉, 토양특징, 농업특징, 기후특징에 비점오염가능성 등 토지이용상 문제점등을 포괄한다면 다양한 자연현상을 기술할 수 있는 효과적인 유역군이 될 것이다.

• Journal of Korea Multimedia Society
• /
• v.6 no.1
• /
• pp.78-88
• /
• 2003

A novel adaptive error concealment technique is proposed using a variable operating region algorithm based on MPEG-4 coding. In the algorithm, a missing block is classified as flat or edge block based on local information from the surrounding blocks extracted using a Sobel operation in a variable operating region (VOR). In this case, the VOR is determined adaptively according to the number of edge directions in the missing block. 1;sing the classification, the flat blocks are then concealed by the Proposed mean based weighted bilinear interpolation (MWBLI) method, and the edge blocks by the boundary directional interpolation (BDI) method. Consequently, the use of the Proposed VOR improves the subjective performance in a curved edge region, while the adaptive processing based on block classification improves the objective performance. Experimental results confirmed that the proposed algorithm produced better results than conventional algorithms, both subjectively and objectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.590-598
• /
• 2004

An active capacitance circuit which employs series feedback network for the implement of negative resistance and low noise operation is analyzed in depth and its application to low noise active RF BPF's is discussed. Whereas many authors reported a lot of circuits that embody negative resistance circuit most of them have concerns for the equivalent resistance and reactance value at the center frequency. In this case, it could be possible to face a problem that the negative resistance circuit becomes unstable, or have poor flatness in passband because of insufficient forecast for the negative resistance values as the frequency goes higher or lower. In this paper, we extracted the exact equivalent values of this circuit and analyzed the RF characteristics with the varying the values of active devices and feedback circuits and presented the method that the flatness of passband can be improved. We have designed a 4-pole active BPF, which has the bandwidth of 60 ㎒, 0.67 ㏈ insertion loss, 0.3 ㏈ ripple, and noise figure of 3.0 ㏈ at 1.99 ㎓ band.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.132-145
• /
• 2009

We present the framework for JND based Illumination and Color Restoration Using Edge-preserving filter for restoring distorted images taken under the arbitrary lighting conditions. The proposed method is effective for appropriate illumination compensation, vivid color restoration, artifacts suppression, automatic parameter estimation, and low computation cost for HW implementation. We show the efficiency of the mean shift filter and sigma filter for illumination compensation with small spread parameter while considering the processing time and removing the artifacts such as HALO and noise amplification. The suggested CRF (color restoration filter) can restore the natural color and correct color distortion artifact more perceptually compared with current solutions. For the automatic processing, the image statistics analysis finds suitable parameter using JND and all constants are pre-defined. We also introduce the ROI-based parameter estimation dealing with small shadow area against spacious well-exposed background in an image for the touch-screen camera. The object evaluation is performed by CMC, CIEde2000, PSNR, SSIM, and 3D CIELAB gamut with state-of-the-art research and existing commercial solutions.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.423-438
• /
• 2021

The blade of motor grader is used for scattering and leveling the aggregates on the foundation of road construction site. The paper performed a design improvement research of the blade part to enhance the working efficiency of motor graders. The scattering works of aggregates by blade driving were simulated by DEM (discrete element method) of a dynamic code. The four design parameters were selected and a specific leveling scenario for the simulation was determined. The nine blade models were numerically experimented, and the sensitivity of each factors was analyzed. Next, the design factors that influence a blade performance have been selected by ANOVA, and these key design factors were applied to the progressive quadratic response surface method (PQRSM). The optimum set of design factors of the blade was finally proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.257-261
• /
• 2022

Additive manufacturing (AM, also known as 3D printing) applied to the construction industry is implemented and verified for various effects since advantages such as high design freedom, improving worker safety, and predictable construction period. However, due to the low maturity compared to the existing technology, studies are underway to solve new problems that occur in the overall of AM technology. In this paper, we confirm the effect of low construction surface flatness on the stacked features in the process of on-site AM construction. In particular, unstable AM features are determined through quantitative analysis by laser scanning, and a construction strategy is proposed for the surface flattening.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.314-321
• /
• 2016

Adapting the maintenance criteria of Seoul City pavement is not applicable for borough pavement due to differences between the pavement of Seoul city and the borough, such as priority of maintenance, traffic volume, thickness of pavement, and pavement deterioration rate by distresses. To develop an efficient and reasonable evaluation method of the Seocho borough pavement condition within a limited budget, this study suggested the borough pavement condition evaluation model based on the PMS (Pavement Management System) of Seoul Metropolitan SPI (Seoul Pavement Index). The SPI was modified to predict the remaining life and determine the proper maintenance method for the pavement in Seocho borough. This was suggested to reflect the rate of the designed performance life and field performance life of pavement as well as the pavement condition at the stage of the completion of construction. Primary variables, such as crack, rutting and IRI in the final model affect the overall performance life due to their even composition. Therefore, the suggested model considering the lowered criteria, design performance factor, and construction factor can be used for the more efficient maintenance of Seocho borough pavement.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.5
• /
• pp.111-119
• /
• 2009

This paper presents an adaptive image interpolation algorithm using local characteristics. An input image is classified into edge region and flat low frequency region. And then, the edge region is further partitioned into directive edge region and high frequency texture region. A bilinear interpolation is applied to flat low frequency region, cubic convolution is applied to texture region, and new edge directed interpolation to directive edge region, respectively. Simulation results show that the proposed algorithm outperforms the existing interpolation methods in terms of visual quality as well as PSNR.

• Korean Journal of Materials Research
• /
• v.8 no.6
• /
• pp.499-504
• /
• 1998

For the formation of cobalt polycide gate electrode, CoSi, was grown on columnar poly-Si, granular poly-Si or amorphous Si by depositing either Co monolayer or Co/Ti bilayer and its thermal stability was compared to study effects of the substrate crystallinity and the silicide formation method. When specimens were rapidly heat-treated at 90$0^{\circ}C$ up to 600 seconds, using amorphous Si or Co/Ti on all substrates improved the thermal stability. This was attributed to the uniform chemical composition of initial CoSi, and its smooth interface with the substrates, induced by smooth and clean Si surface and delayed Co diffusion. The main factors determining the thermal stability were found to be composition uniformity and smooth interface of $CoSi_2$, intially formed at the early stage of the heat-treatment.