• The Journal of the Acoustical Society of Korea
• /
• v.33 no.5
• /
• pp.282-290
• /
• 2014

Though there have been advances in the numerical analysis of the acoustic scattering by smooth objects, numerical analysis of the acoustic scattering by the objects that are partially exposed on the interface are still rare. In determining the backscattering amplitude by a partially buried cylinder on a seabed, reverberation by the interface changes the feature of the scattering form function. Current study adopted the Method of moments (MoM) to provide the numerical analysis on the backscattering amplitude for a partially buried cylinder on a flat interface. Suggested numerical analysis showed the good agreements with the measurements and the analytic solution obtained by the Kirchhoff approximation. Numerical analysis described in the current study can be applied to the backscattering problem of any shape of the objects partially imbedded on a seabed by combining the reverberation from the seabed with the scattered wave from the objects.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.5
• /
• pp.362-369
• /
• 2004

The High-frequency (30 ∼ 120 ㎑) bottom reflection loss at rough water-sediment interface is affected by the gram size distribution of the sediments. The roughness of the bottom surface is represented by "acoustical roughness. g/sub R/" The grain size of sandy sediments is g/sub R/∼O(1) and the dependence as a function of frequency. We suggest the modified bottom reflection loss model (HYBRL model , HanYang university Bottom Reflection Loss model) that include in the deviation of the reflection loss as a function of the grain size distribution and frequency dependence. And bottom reflection loss model of frequency dependence and deviation of bottom properties is verified by water tank and field experiments.

• Korean Journal of Materials Research
• /
• v.6 no.2
• /
• pp.145-152
• /
• 1996

태양전지의 앞면전극으로 사용될 SnO2박막을 spray pyrolysis 방법으로 증착하여 증착조건에 따른 박막 특성을 연구하였다. 증착온도가 증가함에 따라 SnO2박막의 우선방위가 (200)면에서 면밀도가 더 높은 (211), (110)면으로 바뀌었고 막의 미세구조도 거칠고 각진 구조에서 평탄한 구조로 변하였다. 또한 더 안정된 결정면 성장과 온도 증가에 의해 CI, F 등의 불순물 흡착이 어려워져 전자 전하농도가 감소하고 비저항 값이 증가하였다. 특히 50$0^{\circ}C$ 이상에서는 전하농도가 크게 감소하여 비저항이 크게 증가하였다. NH4F/Sn=2.3인 용액으로 40$0^{\circ}C$에서 증착된 SnO2박막은 약 90%이상의 광투과도를 갖고 균일한 도핑으로 인해 약 4$\times$10-4$\Omega$ .cm의 낮은 비저항 값을 나타내었다. 두께에 따른 판저항과 광투과도의 상반된 효과를 고려한 figure of merit으로부터 투명전극으로써 가장 적절한 두께는 약 500nm이었다.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.253-260
• /
• 2010

The primary focus of this study was to explore the variation in dose distributions of electron beams between different types of construction structure of cut-out blocks embodied in electron cones, given that the structure is considered one of the causes of multiple scattered radiation from electrons which may affect dose distributions. For evaluation, two types of cut-out blocks, divergency and straight, manufactured for this study, were compared in terms of area of interval in distribution of dose, and flatness and symmetric state of surface being radiated. The results showed that divergency cut-out blocks reduced the lateral scattering effects on the thickness of cut-out blocks more substantially than straight ones, leading to more uniform dose distribution at baseline depth. Notably in divergency cut-out blocks, the high dose area decreased more significantly, and more uniform dose distribution was observed at the edge of the irradiated field. This points to a need to consider the characteristics of dose distribution of electron beams when setting up radiotherapy planing at the venues. Therefore, this study is significant as an exploratory work for ensuring high accuracy in dose delivery for patients.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.527-536
• /
• 2003

The Dokdo volcano in the south-central part of the East Sea is classified into 8 rock units. The units and sequence suggest that the Dok Island forms a small stratovolcano constructed from at least 3 times eruption cycles above the sea level and proceeded with transformation of a few different eruption styles during each cycle. Reconstruction of the volcanic form, from the geologic structures and spatial lithofacies changes, suggests that the island is remnants of the southwestern caldera rim of the stratovolcano whose central part lies several hundred meters to the northeast. The subaqueous volcano shows abig guyot, which looks like a shield volcano, that represents gentle slope at 90-175 m deep and relatively steep one in 200∼2,000m, and 25∼30km wise base on sea floor. Therefore the total Dokdo volcano represents a multiple volcano that stratovolcano with small caldera overlies the big guyot.

• Journal of the Korean Geographical Society
• /
• v.42 no.3 s.120
• /
• pp.368-387
• /
• 2007

In order to explain geomorphological characteristics of the Korean Peninsula, it is necessary to understand the spatial distribution of tectonic movements and its causes. Even though geomorphological elements which might have been formed by tectonic movements(e.g. tilted overall landform, erosion surface, river terrace, marine terraces, etc.) have long been considered as main geomorphological research topics in Korea, the knowledge on the spatial distribution of tectonic movement is still limited. This research aims to identify the spatial distributions of tectonic movement via sequential analyses of Digital Elevation Model(DEM). This paper first developed a set of terrain analysis techniques derived from theoretical interrelationships between tectonic uplifts and landsurface denudation processes. The terrain analyses used in this research assume that elevations along major drainage basin divides might preserve original landsurfaces(psuedo-landsuface) that were formed by tectonic movement with relatively little influence by denudation processes. Psuedo-landsurfaces derived from a DEM show clear spatial distribution patterns with distinct directional alignments. Lines connecting psuedo-landsufaces in a certain direction are defined as psuedo-landsurface axes, which are again categorized into two groups: the first is uplift psuedo-landsurface axes that indicate the axis of landmass uplift; and the second is denudational psuedo-landsurface axes that cross step-shaped pusedo-landsurfaces formed via surface denudation. In total, 13 axes of pusedo-landsurface are identified in the Korean Peninsula, which show distinct direction, length, and relative uplift rate. Judging from the distribution of psudo-landsurfaces and their axes, it is concluded that the Korean Peninsula ran be divided into four tectonic regions, which are named as the Northern Tectonic Region, Center Tectonic Region, Southern Tectonic Region, and East Sea Tectonic Region, respectively. The Northern Tectonic Region had experienced a regional uplift centered at the Kaema plateau, and the rate of uplift gradually decreased toward southern, western and eastern directions. The Center Tectonic Region shows an arch-shaped uplift. Its uplift rate is the highest along the East Sea and the rate decreases towards the Yellow sea. The Southern Tectonic Region shows an asymmetric uplift centered a line connecting Dukyu and Jiri Mountains in the middle of the region. The eastern side of the Southern Regions shows higher uplift rate than that of the western side. The East Sea Tectonic Region includes south-eastern coastal area of the peninsula and Gilju-Myeongchun Jigudae, which shows relatively recent tectonic movements in Korea. Since this research visualizes the spatial heterogeneity of long-term tenonic movement in the Korean peninsula, this would provide valuable basic information on long-term and regional differences of geomorphological evolutionary processes and regional geomorphological differences of the Korean Peninsula.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.6
• /
• pp.887-903
• /
• 2017

Lots of shallow tunnels are constructed in the mountainous areas where the stress distribution in the ground around tunnel is not simple, also the impact of stress conditions on the longitudinal load transfer characteristics is unclear. The tunnel construction methods and the ground conditions would also affect the longitudinal load transfer characteristics which would be dependant on the displacement patterns of tunnel face. Therefore, in this study, the slope of the ground surface was varied in $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, and the longitudinal load transfer depended on the deformation conditions of tunnelface (that were maximum deformation on the top, constant deformation, and maximum deformation on the bottom), and the stress distribution at tunnelface. As results, when the tunnelface deformed, the earth presure on the tunnelface decreased and the load at tunnel crown increased. The load transferred on the crown was influenced by the earth presure on tunnel face. Smaller load would be transfered to the wide areas when the slope of ground surface decreased. When the slope of ground surface became larger, the longitudinal load transfer would be smaller and would be concentrated on tunnelface, In addition, the shape of the transferred load distribution in the longitudinal direction was dependant on the deformation shape of tunnelface. The deformation shape of tunnelface and stress conditions in longitudinal sections would affect the shape and the magnitude of the load transfer in the longitudinal directions.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.983-986
• /
• 2007

Concrete surface grinding is required for flatness and adhesiveness of concrete surface. The procedure is, however, labor intensive and has a hazardous work condition. Also, the productivity and the quality of concrete surface grinding depend on the levels of worker. Thus, the development of remote controlled concrete surface grinding equipment is necessary to prevent the environmental pollution and to protect the workers from hazardous work condition. However, it is difficult to evaluate the grinded surface objectively in a remote controlled system. The machine vision system developed in this study takes the images of grinded surface with the network camera for image processing. Then, by representing the quality test results to the graphic MMI program of the remote control station, the quality control system is constructed. The machine vision algorithm means the image processing algorithm of grinded concrete surface and this paper presents the objective quality control standard of grinded concrete surface through the application of the suggested algorithm.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.372-375
• /
• 2002

타이어코드는 복합재료의 원조라고도 불리는 타이어의 적절한 보강용 재료로 복합재료용 섬유의 선구자라고 할 수 있다. 1888년 Du Pont에서 공기를 넣는 타이어를 만든 이후 타이어코드는 마, 면, 레이온, 나일론, 스틸, 폴리에스테르, 글라스, 아라미드 등과 같은 새로운 소재가 계속적으로 개발되어 타이어의 고기능화와 함께 타이어코드의 고기능화도 이루어져 왔다[1]. 이러한 타이어 코드 소재로는 현재 여러 가지가 있으나, High Modulus Low Shrinkage (HMLS) 타입의 PET 타이어코드는 다른 소재에 비해 가격이 안정적이고, 강도가 탄성률이 우수하며 특희 나일론에 비하여 초기 탄성계수 및 치수 안정성이 우수하여 평탄점(flot spot)현상도 적기 때문에 레이온을 대신하여 승합차용으로 사용량이 계속 증가되고 있다[2]. (중략)

• The Journal of Engineering Geology
• /
• v.19 no.2
• /
• pp.145-152
• /
• 2009

Joints are planar tensile opening-mode fractures whose relative motion, as the fracture propagates, is perpendicular to bedding plane and occur in a systematic manner to form a joint set. This paper discusses the mechanical control of joint propagation, the relationship between join spacing and layer thickness, the join saturation, the frequency distribution of join spacing, the joint density, the cross joint, and the development mechanism of joint from a lot of recent joint studies in sedimentary rocks.