• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.199-200
• /
• 2015

도시부 교차로의 설계는 지방부 교차로와 근본적으로 달라야 하나, 현행 도시부 교차로 설계는 지방부 교차로 설계기준을 준용하고 있다. 본 연구는 도시부 및 지방부 교차로의 차이점을 비교 분석하고, 국내외 교차로 종단경사 설계기준을 검토한 후 적정 설계기준(안)을 적용한 후, 이를 통계적 분석기법을 활용하여 검증하여 설계기준을 정립하는 순으로 진행 하였다. 분석결과 정면충돌사고율과 차대차추돌사고율이 종단경사와 상관관계가 있는 것으로 나타났다. 이러한 연구를 통해 적정 교차로 종단경사를 적용한 설계가 이루어져야 함을 확인 할 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.209-215
• /
• 2011

Roundabout has circular traffic island in the intersection center and is kind of intersection where the automobile bypass circular traffic island. In Korea, the provisional Roundabouts Design Guidelines were published in 2004 by MLTM (Ministry of Land, Transport and Maritime Affairs). This guideline did not discussed domestic traffic circumstance. It just only introduced foreign instances and their guidelines. In addition, the recent National Competitiveness roundabouts as part of the green growth has been concentrated on the interest. In this paper, 90 degree of the 4-legged roundabout was compared with 72 degree, 45 degree, and 30 degree 5-legged roundabouts by micro simulation VISSIM. As a result of analysis, average travel time is decreased when the inscribed circle diameter become bigger the roundabout. 5-legged roundabout until 2,000 volume per hour evaluated to be similar effect at 90 degree of 4-legged roundabout.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.295-306
• /
• 2008

The Intersection is inner traffic facilities and the space where the roads are intersected and connected. And also, the Intersection is the decision-making section for drivers to select the route according to the geometric structure and operation method. However decision-making section cause to raise car accidents rate because it imposes a heavy burden on drivers. In that reason, many countries such as Europe use the Roundabouts to reduce the numbers of decision making and collision. In Korea, the kinds of method are just introduced and it is using now but there are no exact standards. Hence, this study suggests the process to evaluate and determine the types of Intersection which are based on the traffic flow (congestion) and traffic safety (accidents). Firstly, this study presents the number of accident at each Intersection which is depended on the traffic volume. Secondly, this study calculates and analysis the accident at signalized Intersection, non-signalized Intersection and Roundabout by TSIS-NETSIM program. Thirdly, this study concludes the best suitable Intersection type through the materials which are mentioned before.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.187-192
• /
• 2015

In general, design of urban intersections are fundamentally different from rural intersections, but current urban intersection design has been appled to rural standards. This study has suggested the design standard for urban intersection grades based on the existing literature, field investigating and comparative analysis. Moreover, this study analyzes and compares the differences between urban and rural intersections, and intersections have been derived by appropriate design standards after reviewing the domestic and international grades design criteria. Site survey was performed to validate the derived design criteria by analyzing statistically to establish the design standards. Results were produced for the intersection portion grade standards by comparing the number of instructions which produced appropriate slope degree from 2.5% to 3% in normal condition and slope can be extended to 5% in some critical cases. In-situ investigation was performed to validate the produced data where slope was found from 0.0~8.6%. Additional data of accident analysis were also collected for the validation of the suggested data and correlation analysis was performed using the SPSS tool. Data were analyzed statistically using 95% significance level for vehicle-to-vehicle collided, head-on collision accident rates, where accident rates significantly correlated with the grade. Therefore, appropriate grade at the intersection should be designed and applied in order to reduce the number of accidents at the intersection. Finally, appropriate grades for urban intersections are suggested from 1-3% for normal cases and grades could extend up to 5% for unavoidable cases where extra care must be taken when designing.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.105-116
• /
• 2007

A ROUNDABOUT is more effective way to improve safety and prevent delays than signal intersection. ROUNDABOUT has been known highly safe treatment that could be used as a method to reduce conflicts between vehicles, to reduce travel speed in inner or approach of intersection, and to have no speed difference between drivers than intersection. In this study, the effective analysis on the installation of ROUNDABOUT was carried out using computer-based simulation tool VISSIM, in order to evaluate performance and safety of ROUNDABOUT and develope a warrant. In conclusion, the results indicated that there was remarkable increase of Y-intersection capacity and decrese of delay, and improvement of traffic safety. Finally, A nice feature of this study is to firstly attempt to use microscopic simulator to evaluate the effectiveness of ROUNDABOUT and suggest a passible operation boundary.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.623-636
• /
• 2012

Roundabout is an intersection that allows vehicles to pass through the intersection by circulating the circular traffic island at the center of the intersection. In this study, a comparative analysis was conducted on roundabout at five locations in order to deduce the operational result and financial effect of roundabout and signal intersection. As for the operational result, it was found that roundabout showed improvement effect in the average delay per vehicle compared to that of signal intersection by minimum of 65.6% and maximum of 91.77%. it was found that roundabout showed financial cost-saving effect in the traffic congestion cost compared to that of signal operation by minimum of 58.59% and maximum of 81.69% per year. It can be known from these analysis results that roundabout has significant operational effects under certain amount of traffic volume by allowing vehicles to pass through the intersection in a continuous way without much waiting time and stoppage from signal control.

• Journal of the Korean Professional Engineers Association
• /
• v.39 no.1
• /
• pp.67-69
• /
• 2006

• Transportation Technology and Policy
• /
• v.5 no.4
• /
• pp.69-79
• /
• 2008

• Journal of Korean Society of Transportation
• /
• v.31 no.6
• /
• pp.43-52
• /
• 2013

A roundabout is a form of circular intersection in which traffic travels counterclockwise around a central island and in which entering traffic must yield to circulating traffic. It has been known that a roundabout provides substantially better operational and safety characteristics than other intersections including rotaries. Recently, a roundabout has started to be constructed due to its efficiency, safety, and other advantages of a roundabout comparing other intersections in Korea. However, there has been no guideline to be used to decide appropriate intersection types considering given conditions of the intersections. To solve this problem, the guideline with traffic volume to choose the suitable intersection types was developed based on analysis results using the SIDRA software which is generally used to analyze operational effects of roundabouts. It was found that a roundabout is more efficient than signalized intersection when the traffic volume is between 125 and 450 veh/h on one lane road and roundabout is not recommended when there are more than 30% left turn traffic. The optimal traffic volume provided in this research will be usefully used in planing and designing roundabouts in Korea.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.73-81
• /
• 2005

Triangle-shaped island was been used for the exclusive separation between the right-turn and the through flow. However, in case that existing Triangle-Shaped Island is built at the intersection of narrow road. there are more possibilities of traffic collision trespassing into the opposite lane. Accordingly, separation of the opposite lane is required so as to prevent the intrusion of the large-sized (a heavy) vehicle into the opposite lane turning at the intersection. This study showed the comparison between intersection composed of existing Triangle-Shaped Island and the intersection with Drop Island is added. First of all, in the safety aspect, a method to decide location and shape of Drop Island considering turning trajectory of the large-sized (the heavy vehicle) is addressed. The guideline on the placement of drop island install location and method to decide form the consider heavy truck's turn trajectory in safety side. As a conclusion. we analyzed that drop island is relatively superior to existing Triangle-Shaped Island in terms of driver, ease of driving, driving pleasantness, pedestrian, widening and economic performance aspect.