• Fire Science and Engineering
• /
• 제24권4호
• /
• pp.18-26
• /
• 2010

The change of fuel moisture according to the passed days after a raindrop is very important to forecast risk of forest fire and to make a good use of forest fire watchmen. For that reason, in the Spring of 2007, we researched pine forest that were widespread growing in Yeongdong region to find out the condition of forest fire risk. We developed the forecast model of fuel moisture change on dead tree branches which were dropped on the ground and less than 0.6 cm, 0.6~3.0 cm, 3.0~6.0 cm, and more than 6.0 cm in diameter after more than 5.0 mm in precipitation. The result showed that the less diameter of ground fuel and small stand of pines the faster diminishing of fuel moisture, and the days of reaching to a forest fire danger fuel moisture level were represented by two (2) days for less than 0.6 cm diameter of small stand of pine and three (3) days for 0.6~3.0 cm diameter one, respectively. By those results, we developed the forecast model($R^2=0.76{\sim}0.92$) of fuel moisture change on different diameter of small stand of pine, and found that the model had statistical significant of 1% level after we applied it to the data of 2008 after the same period of raindrop by actual meteorological measurement.

• Journal of Wetlands Research
• /
• 제16권3호
• /
• pp.303-313
• /
• 2014

The spatial distribution characteristic of fish community were investigated at the 10 habitat types in the Nonsan stream from August, 2008 to June, 2009. The collected species during the surveyed period were 26 species belong to 6 families. Korean endemic species were Sarcocheilichthys nigripinnis morii, Squalidus japonicus coreanus, Hemiculter eigenmanni, Pseudobagrus koreanus, and Odontobutis interrupta which showed 19.2% ratio of total species. Dominant species was Zacco platypus, and subdominant species was Tridentiger brevispinis. Dominant species according to habitat types were Micropterus salmoides(substrate type pool and rock type pool), Lepomis macrochirus(channel connected pool and channel unconnected pool/abandoned type pool), T. brevispinis(channel unconnected pool/overflow type and run) and Z. platypus(riffle, meander type pool, side channel, and dam type pool). As a results of community analysis in side channel, diversity index showed relatively high values, indicating that habitat types in the Nonsan stream have relatively stable community structure. Bray-curtis cluster analysis indicated that the meander type pool and riffle showed the most similar values(80.8%). Moreover, cluster and principal component analysis were classified as 2 groups(lotic and lentic habitats).

• Journal of Wetlands Research
• /
• 제22권4호
• /
• pp.328-336
• /
• 2020

In this study, the soil characteristics of peat layer in Korea were analysed to predict new peat distribution areas in Taean, Chungcheongnam-do. The soil characteristics of peat distribution areas in Taean were compared with those in other areas in Korea. In Korea, peat researches were conducted in various regions, such as Taean in Chungcheongnam-do, Pyeongtaek in Gyeonggi Province, Gangneung in Gangwon-do, Ulsan, Iksan in Jeollabuk-do and Jangheung in Jeollanam-do. We summarized a) topographic distribution, b) deposition type, c) soil drainage classes, and d) soil suborder of previously studied area to determine criteria for prediction of peat distribution area. Through a case study, the type of peat layer distribution area in Taean were divided into two; (1) a) valley, b) co-alluvium, c) somewhat poorly drained, d) aqualfs and (2) a) marine plain, b) alluvium, c) very poorly drained, d) aquepts. A field survey was conducted to confirm the distribution of the actual peat layer. All peat layer were located within 10-km from the coastal line which is similar to previous studies, and the peat layer was characterized with pH 5, humic acid content of less than 15% and dark brown color. The new peat layer in Taean was deeper, thicker and less humificated than other studied areas.

• Korean Journal of Materials Research
• /
• 제8권12호
• /
• pp.1182-1189
• /
• 1998

High quality $TiN/TiSi_2$-bilayers were formed on the Si(100) substrate at room temperature and at $600^{\circ}C$ first by coevaporation of stoichiometric Si and Ti(Si:Ti = 2:1) fellowed by Ti reactive deposition in N, gas ambient, and in situ annealing in ultrahigh vacuum. Stoichiometric $Ti_{0.}N_{0.5}$, films with (111) texture and $C54-TiSi_2$ films were grown by annealing at temperatures above $700^{\circ}C$. $TiN/C54-TiSi_2$/Si(100) interface was clear and flat without agglomoration, and $CS4-TiSi_2$ film was epitxailly grown. The sheet resistance of the $TiN/TiSi_2$- bilayer decreased as the annealing temperature increased and about $2.5\omega/\textrm{cm}^2$ was obtained from the sample annealed over $700^{\circ}C$.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 한국분말야금학회 2002년도 춘계학술강연 및 발표대회
• /
• pp.45-45
• /
• 2002

나노미터 크기의 결정립을 가지는 나노분말 및 나노복합분말의 제조와 특성에 관한 연구가 매우 활발하다. 나노복합분말의 제조방법에는 기상증발후 응축법, 화학응축법, 기계적합금법 등이 있으나, 고순도 및 균일한 크기분포의 분말과 응집되지 않은 분말의 제조 조건을 가장 잘 만족하는 방법은 화학기상응축법(Chemical Vapor Condensation; CVC)이다. 본 연구그룹 에서는 CVC밤법으로 이용하여 공구/금형재료에 가장 많이 사용되는 WC/Co 합금의 결정립을 n nm크기로 극미세화고자하는 연구을 진행하고 있다. 본 연구에서는 이들 WC/Co합금제조시 가장 중요한 출발분말인 나노크기 WC 분말의 제조와 그 특성에 관하여 연구하고자 하였다. 나노미터 WC분말을 제조하기 의한 전구체는 고상의 금속유기물인Tungstenhexacarbonyl$(W(CO)_6)$ 을 사용하였다. 수평관상로을 반응기로 사용하였으며, 노내의 온도을 500-110$0^{\circ}C$로 변화시 키면서 WC 분말을 합성하였다. 반응기 및 포집기 내부를 대기분위기, 상압의 Ar분위기, 진공 분위기로 변화시켜 압력 및 분위기의 영향을 조사하였다. 포집기는 상온 및 액체질소로 냉각 한 Chiller을 사용하였다. 형성분말의 상분석은 XRD로 조사하였으며, 형태 및 결정립크기는 TEM로 분석하였다. 반응온도 600 -1 OOO$^{\circ}C$의 온도범위에서 검은색의 WC 분말이 제조되었다. XRD 분석의 결과 로 제조된 분말은 상온에서 준안정상인 Hexagonal 구조의 $\gammar-WC_{1-x}$ 상이였으며, TEM 분석결 과 상압하에서는 약 30nm이하의 WC분말이 제조되었으며, 그 형태는 둥근 4각형의 모양을 지녔다. 감압하에서 진행한 경우 결정립의 크기는 8nm이하를 가졌다.곤가스로 산화를 방지하였고, 냉매로는 질소가스를 이용하였다. 제조된 분말을 기ㅖ적 분급법을 이용하여 분급하였고, 냉매로는 질소가스를 이용하였다. 제조된 분말을 기계적 분급ㅂ법을 이용하여 분급하였고, 압출에 이용된 분말은 250$\mu\textrm{m}$이하의 크기를 사용하였다. 또한 분말제조과정 중 형성되는 표면산화층을 제거하기 위하여 36$0^{\circ}C$에서 4시간동안 수소 환원처리를 행하였다. 제조된 분말은 열간 압출을 위하여 Aㅣcan에 넣고 냉간성형체를 만들고, 진공처리를 한 후 밀봉하여 탈가스처리를 하였다. 압출다이는 압출비가 각각 28:1과 16:1인 평다이(9$0^{\circ}C$)를 사용하여 각각 내경이 9, 12cm이고, 길이가 50, 30cm인 압출재를 제조하였다. 열간압출한 후의 미세조직을 광학현미경으로 압출방향에 평행한 방향과 수직방향으로 관찰하였고, 열간 압출재 이방성을 검토하기 위하여 X선 회절분석을 실실하여 결정방위를 확인하였다. 전기 비저항 및 Seebeck 계수 측정을 위하여 각각 2$\times$2$\times$10$mm^3$ 그리고 5$\times$5$\times$10TEX>$mm^3$ 크기의 시편을 준비하였다.준비하였다.전류를 구성하는 주요 입자의 에너지 영역(75~l13keV)에서 가장 높은(0.80) 상관계수를 기록했다. 넷째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가 있음을 시사한다.se that were all low in two aspects, named "the Nonsign

• Journal of Korean Society of Forest Science
• /
• 제85권4호
• /
• pp.577-585
• /
• 1996

To seek effective methods for evaluating air pollution and acid rain injury, artificial acid mist(pH 2.5, 3.5 and 4.5) and ground water(pH 6.5) were treated on the potted seedlings of Ligustrum obtusifolium, Cercis chinensis, Hibiscus syriacus and Sophora japonica. Leaf chlorophyll contents, characteristics of leaf-injury, wettability-measurement of diameter of water-droplets on the leaf surface-among treatments were investigated. The results were summarized as follows. 1. Chlorophyll contents of Ligustrum obtusifolium and Hibiscus syriacus measured on June 3 were highest in pH 2.5 plot, but those of Cercis chinensis and Sophora japonica were relatively low level. Chlorophyll contents of Ligustrum obtusifolium measured on August 24 was highest in pH 2.5 plot, but those of Cercis chinensis, Hibiscus syriacus and Sophora japonica were highest in the control. 2. Changes of chlorophyll contents with acid mist treatments were differed among tree species. 3. For all the tested species, leaf injury(injured leaf number and rate, and injured leaf area) increased with decreasing pH levels of acid mist. 4. Leaf tissue injury seemed to be related with the wettability of the leaf surface. Measurement of diameter of water-droplets on the leaf surface might be useful criteria for acid rain or acid mist injury for the glabrous leaved species, such as, Cercis chinensis, Sophora japonica, etc.

• Spatial Information Research
• /
• 제20권3호
• /
• pp.27-38
• /
• 2012

As the necessity of forest conservation and management has been increased, various forest studies using LIDAR data have been actively performed. These studies often utilize the tree height as an important parameter to measure the forest quantitatively. This study thus attempt to apply two representative methods to estimate tree height from airborne LIDAR data and compare the results. The first method based on the detection of the individual trees using a local maximum filter estimates the number of trees, the position and heights of the individual trees, and the mean tree height. The other method estimates the maximum and mean tree height, and the crown mean height for each grid cell or the entire area from the canopy height model (CHM) and height histogram. In comparison with the field measurements, 76.6% of the individual trees are detected correctly; and the estimated heights of all trees and only conifer trees show the RMSE of 1.91m and 0.75m, respectively. The tree mean heights estimated from CHM retain about 1~2m RMSE, and the histogram method underestimates the tree mean height with about 0.6m. For more accurate derivation of diverse forest information, we should select and integrate the complimentary methods appropriate to the tree types and estimation parameters.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제13권1호
• /
• pp.17-26
• /
• 2009

The capacity spectrum method (CSM), which is known to be an approximate technique for assessing the seismic capacity of an existing structure, was originally proposed for simple building structures that could be modeled as single-degree-of-freedom (SDOF) systems. More recently, however, CSM has increasingly been adopted for assessing most bridge structures, as it has many practical advantages. Some studies on this topic are now being performed, and a few results of these have been presented as ground-breaking research. However, studies have until now been limited to symmetrical straight bridges only. This study evaluates the practical applicability of CSM to the evaluation of irregular curved bridges. For this purpose, the seismic capacities of 3-span prestressed concrete bridges with different subtended angles subjected to some recorded earthquakes are compared with a more refined approach based on nonlinear time history analysis. The results of the study show that when used for curved bridges, CSM induces higher inelastic displacement responses than the actual values, and that the gap between the two becomes larger as the subtended angle increases.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제44권7호통권361호
• /
• pp.105-111
• /
• 2007

In this paper, we designed and fabricated a 3-dB tandem coupler using air-bridge technology for millimeter-wane monolithic integrated circuits, operating at W-band($75{\sim}110\;GHz$) frequency. Tightly edge-coupled CPW line has low directivity due to different even-mode and odd-mode phase velocity. To overcome this disadvantage, a 3-dB tandem coupler which comprises the two-sectional weakly parallel-coupled lines with equal phase velocity was designed at W-band. The proposed coupler was fabricated using air-bridge technology to monolithically materialize the uniplanar coupler structure instead of conventional multilayer or wire bonded structure. From the measurements, the coupling coefficient of $2.9{\sim}3.6\;dB$ and the good phase difference of $91.2{\pm}2.9^{\circ}$ were obtained in broad frequency range of $75{\sim}100\;GHz$.

• The Journal of Society for e-Business Studies
• /
• 제16권4호
• /
• pp.125-137
• /
• 2011

Product reviews in online shopping sites can serve as a useful guideline to buying decisions of customers. However, due to the massive amount of such reviews, it is almost impossible for users to read all the product reviews. For this reason, e-commerce sites provide users with useful reviews or statistics of ratings on products that are manually chosen or calculated. Opinion mining or sentiment analysis is a study on automating above process that involves firstly analyzing users' reviews on a product to tell if a review contains positive or negative feedback, and secondly, providing a summarized report of users' opinions. Previous researches focus on either providing polarity of a user's opinion or summarizing user's opinion on a feature of a product that result in relatively low usage of information that a user review contains. Actual user reviews contains not only mere assessment of a product, but also dissatisfaction and flaws of a product that a user experiences. There are increasing needs for effective analysis on such criteria to help users on their decision-making process. This paper proposes a model that stores various types of user reviews in a data warehouse, and analyzes integrated reviews dynamically. Also, we analyze reviews of an online application shopping site with the proposed model.