• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.473-478
• /
• 2004

LIDAH data often include systematic errors, which should be removed by a calibration process. This paper proposes a robust approach to calibrating LIDAR data using natural surfaces as reference data. The uniqueness of this approach is to employ a sophisticated selection scheme so that only a portion of LIDAR points can be used to estimate the bias parameters generating the systematic errors. This approach was applied to calibrating simulated LIDAR data. The results show that the approach can successfully recover the bias parameters and calibrate the data with acceptable RMS errors. Particularly, the parameter recovery model can be easily extended to register image data with LIDAR data.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.529-534
• /
• 2004

The increasing need and use of 3D GIS particularly in urban areas has produced growing attention on building reconstruction. Nowadays, the use of close-range data for building reconstruction has been intensively emphasized since they can provide higher resolution and more complete coverage than airborne sensory data. We developed a fusion approach for building reconstruction from both points and images. The proposed approach was then applied to reconstructing a building model from real data sets acquired from a large existing building. Based on the experimental results, we assured that the proposed approach cam achieve high resolution and accuracy in building reconstruction. The proposed approach can effectively contribute in developing an operational system producing large urban models for 3D GIS.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.231-233
• /
• 2010

Many algorithms for processing LIDAR data are being developed for diverse applications not limited to patch segmentation, bare-earth filtering and building extraction. However, since we cannot exactly know the true locations of LIDAR points, it is difficult to assess the performance of a LIDAR data processing algorithm. In this paper, we thus attempted the performance assessment of the segmentation algorithm developed by Lee (2006) using the LIDAR data generated through simulation based on sensor modelling. Consequently, based on simulation, we can perform the performance assessment of a LIDAR processing algorithm more objectively and quantitatively with an automatic procedure.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.77-80
• /
• 2010

The demand for human security significantly promotes the development of surveillance applications using a multi-sensor integrated UAV system. For more sophisticated operations, the system should provide a sequence of images rectified in a ground coordinate system in realtime. This rectification requires accurate position and attitude of the camera at the time of exposure of each image, which can be estimated through an Aerial Triangulation process using the GPS/INS data and tie points between adjacent images. In this work, the KLT tracker is utilized to obtain the tie points. To satisfy the realtime requirements, we present an approach to speed up the tracker by supplying the initial guessed positions of tie points based on the exterior orientation. The experimental results show that, when the guessed positions are supplied, the KLT tracker consumed less computational time than the ordinary KLT which is more suitable to be incorporated into the realtime image georeferencing process.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06c
• /
• pp.252-254
• /
• 2011

본 연구에서는 온라인 사용자 후기글 혹은 상품평관련 사이트에서 나타나는 '질의(Ouery)'가 무엇에 대한 것인지를 분석하고, 그 초점을 제시하는 시스템의 구현을 위하여 요구되는 언어자원을 구축하는 것을 목적으로 한다. 이를 위해 개상의 상태 혹은 성질을 나타내는 의문사 '어떠하' 질의문 유형을 추출하여 여기에서 실현되는 질의초점 명사구에 대한 어휘 사전 및 통사 패턴 LGG문법을 구축하여 질의문의 초점 분석을 위한 체계적인 언어자원 구축의 필요성을 강조하였다. 이와 같이 구축된 LGG문법과 초점어휘 사전의 성능평가를 위해 실험을 수행하였고, 재현률 59%와 정확률 98%의 실험결과를 얻었다.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.28-33
• /
• 1987

This thesis is to improve the mechanical properties of carbon steel by the ion-nitriding, and post-heat treatment. The structures of ion-nitrided SM45C steel were changed to martensite by quenching from 730.deg. C and 800.deg. C. And then a few of the quenched specimens was tempered at 200.deg. C for 120 min. The emphasis in this study is focussed on Comparison of hardness and fatigue strength with the ion-nitrided steel. The results obtained are summerized as follows. 1. To improve the hardness and fatigue strength of ion-nitrided steels, it is effective to under take diffusion treatment for a short time at the austenite temperature(800.deg. C). 2. If ion-nitrided steel is heated for a long time at high temperature, de-nitriding occure. 3. The quenching treatment after nitriding on the carbon steel is necessary to improve the mechanical properties of the steels.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.7-16
• /
• 1999

To maintain thereasonable temperature in the engines is very important to keep the steady combustion state of engine and to prevent increasing of oil consumption , deteriorating of lubricant, shortening of the life time of engine and decreasing of material strength. The method of energy balance for divided elements of radiator and engine-oil cooler is considered to analyse the performance of radiator and engine-oil cooler. The data obtained by engine test and vehicle cooling tunnel test are applied to program for calculation of radiator outlet temperature. As a result, data obtained by numerical analysis agree well with those by experiments. And thus, it is concluded that this simulation program is available in developing the cooling system for a new car.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.79-83
• /
• 2010

Recently, the flat wiper which is one piece wiper and subjected to a pressing force at a single center point is gaining wide applications on automotive windshields. However, nonuniform reactive pressure distributions takes place, so that wiping is not completed at such locations. The wiping performance of the flat wiper is best when a wiper and a curved windshield have perfect contact without gaps under the specified pressing force of 13 ~ 15 gf/cm. Therefore, it is necessary that the realistic curvature equation of a wiper spring-rail should be obtained. Finite element analysis, CATIA script-macro function, and the least square method were utilized to find out the curvature of a spring-rail for a perfect contact with a windshield under a specified concentrated load. The curvature equation became the third order polynomial.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.94-99
• /
• 1995

본 연구는 태양열 열펌프시스템에 의한 약 6평 규모의 실내의 난방방법으로서 간접 난방인 온수순환난방과 직접난방인 복사난방의 성능을 분석하였다. 태양열 열펌프의 최대의 열적성능을 나타낼 수 있도록 알루미늄 롤 본드형 태양열 집열기의 면적을 조절하였으며 집열효과를 극대화하기 위하여 온도감응 자동팽창밸브의 용량을 변화시켰다. 본 실험에서 적용된 태양열 열펌프 난방은 서울지방 봄 가을철의 외기온도에서 실내온도가 18~2$0^{\circ}C$로 유지되도록 설계제작되었다. 태양열 열펌프시스템에 적용된 작용유체는 온수순환 난방에는 R-12냉매. 그 대체냉매는 R-134a 및 혼합냉매, 복사난방에는 R-22냉매이었다.

• Journal of Environmental Impact Assessment
• /
• v.10 no.3
• /
• pp.195-209
• /
• 2001

The objective of this study is intended to propose plans for reforming environmental impact assessment(EIA) systems by reviewing the current legal systems of EIA related laws and their implementation status in Korea, and by comparing the Korean situation to EIA systems in several foreign countries. This study tried to integrate all EIA related systems scattered over several laws into one comprehensive EIA law, and also to develop legal procedures necessary to accomplish the legislative purpose of the integrated EIA law. Therefore, I propose four reforms (1) All EIA systems should be integrated into one comprehensive EIA act. (2) Administrative plans and policies, though environmentally harmful, which are not currently subject to any prior consultation system, should be covered by the prior consultation system. (3) A screening or scoping should be adopted. (4) Widen civil participation should be encouraged and the administrative control enforcement and introduction of group litigation or citizen suits would be considered.