• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 추계학술대회논문집
• /
• pp.185-191
• /
• 1996

The Variation of die bearing is primary way to control the metal flow in hot square die extrusion process. Finite element computations are carried out to assess the influence of die bearing on metal flow and state variables. The finit element method is developed based on ALE description for a rigid-viscoplastic material. Since thermal state computational example, hot square die extrusion with varied die bearing lengths has been analyzed for the profile of a L-section.

• 소성∙가공
• /
• 제5권2호
• /
• pp.97-104
• /
• 1996

It is very important to obtain the knowledge of loads and flow patterns in most processes because these information are the fundamental data of die design and process design. The objective of present study is to investigate loads and metal flow patterns for various process conditions in flat die extrusion of square-bars from circular billets. For analyzing the metal flow patterns of the billets photo etching is used on sections of split specimen. From this method metal flow patterns are analyzed for various area reductions friction factors and punch stroke through the process from initial-stage to final-stage. Experiments are carried out with hard solder billets at room temperature.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.207-225
• /
• 1992

The study is concerned with the thermo-viscoplastic finite element analysis of axisymmetric forward hot extrusion through square dies. The problem is treated as a nonsteady state problem because the distribution of temperature and material properties are continuously changing with the punch travel. In square die extrusion, difficulties arise from the severe distortion and die interference of elements at the aperture rim of the die even with a small punch travel. And finite element computation is impossible without intermittent remeshing. Accordingly, an automatic remeshing technique is proposed by employing specially designed mesh structure near the aperture rim. The analysis of temperature distribution includes heat conduction through material interfaces, heat convection and radiation to the atmosphere and is carried out by decoupling the heat analysis from the analysis of the deformation. The extrusion load and the distributions of strain rate and temperature are computed for the given cases rendering reasonable results. Computed grid distortions are found to be in good agreement with the experimental results. It has been thus shown that the proposed method of analysis can be effectively applied to the axisymmetric hot extrusion through square dies.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.797-801
• /
• 2003

The mechanical properties such as shear strength and the hardness of milli-size products that manufactured for various process parameters by forward extrusion using square dies are investigated. Shear strength test is implemented for the observation of relation between vickers hardness and shear strength in the interface of head and shaft part of a stepped pin. When the extrusion ratios of pure aluminum and pure copper billets increase, the hardness on both the surface and the center line of a pin also increase, especially the hardness on the surface is shown to be a little higher than on the center. The existence of knock-out pad in extrusion die caused hardness increase in the interface of a extruded pin. As compared shear strength with hardness of a pin, the approximated linear relations are suggested in this study.

• 소성∙가공
• /
• 제3권2호
• /
• pp.156-166
• /
• 1994

An arbitrary Lagrangian-Eulerian (ALE) finite element method has been developed. The finite element formation is derived and implemented for rigid-viscoplastic materials. The developed computer program is applied to the analysis of axisymmetric square die extrusion, which has many difficulties with updated Lagrangian approach. The results are compared with those from updated Largrangian approach. The results are compared with those from updated Lagrangian finite element program. Updating scheme of time dependent variables and mesh control are also examined.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.107-113
• /
• 1995

To investigate the behavior of platic deformation inaxisymmetric hot extrusion through square dies, the physical modelling with the plasticine as a model material is carried out at the room temperature. Some mechanical properties of the model material are determined by compression and ring compression tests. Visioplasticity method using experimetal grid distortion is introduced to anlayze the plastic flow, strain rate and strain distribution.

• 소성∙가공
• /
• 제7권4호
• /
• pp.375-381
• /
• 1998

This paper presents development of finite element simulation program and analysis of hot extrusion through square dies with a mandrel. The design of extrusion dies is still an art rather than science. Die design for a new extrusion process is developed from through in-plant trials. In the present paper, a three-dimensional steady-state finite element simulation program is developed. Steady-state assumption is used for both the analyses of deformation and temperature. The developed program is effectively used to simulate hollow extrusion of several sections. Distributions of temperature effective strain rate, mean strain rate and mean stress are studied for an effective design of extrusion dies.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.127-138
• /
• 1991

본 연구에서는 인벌류트 치형을 갖는 헬리컬 기어압출에 있어서 실제 치형형 상인 인벌류트 곡선을 다이의 형상으로 하여 비대칭 형상의 다이를 몇 개의 대칭영역 으로 분할하고 각 영역에 대하여 각각의 동적가용 속도장을 구한 후 전체 형상으로 확 장시켜 상계해석 하였다. 해석결과의 계산은 위의 동적가용속도장으로 헬리컬 또는 평기어 압출을 해석하는 수치해석 프로그램을 개발하여 수행하였다. 상계해석에서는 기초원 이하의 필렛부분과 이 뿌리 틈새등은 그 형상이 매우 복잡하므로 해석의 간략 화를 위하여 기초원까지만 변형되는 것으로 가정하였으나 실제의 기어압출실험에서는 기어의 모든 조건이 고려되었다. 압출실험은 전기동으로 전극봉을 제조하고, 전극설 계시에 금형과 소재의 탄성변형량, 방전가공시의 과방전량 그리고 래핑 가공여유등을 고려하여 설계한 후 호빙 및 셰이빙가공하여 실제 제조하려는 기어와 유사하게 기어전 극을 제조한 후, 이를 금현본체와 조립하여 3축제어 방전가공기로 금형을 제작하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.98-101
• /
• 2001

In the present study, several design parameters of the flat-die extrusion process are investigated using the rigid-plastic finite element method. The effect of loaction of extrusion profile, arrangement of multiple extrusion profiles, and design of various die land has been investigated through the analysis. Several numerical examples of flat-die extrusion, such as C-section, multiple U- shape, and window guide extrusion, are analyzed. From the comparative study, the effect of design parameters is investigated. In each example, comparing the velocity distribution with that of the original design, it has been shown that the design modification affords much more uniform distribution of axial velocity

• 소성∙가공
• /
• 제10권7호
• /
• pp.551-557
• /
• 2001

In the present study, several design parameters of the flat-die extrusion process are investigated using the finite element method. The effects of the location of an extrusion profile, arrangement of multiple extrusion profiles, and the design of various die land have been investigated through the analysis. Several numerical examples of flat-die extrusion of such as C-section, multiple U-shape, and a window guide section, are analyzed. From the comparative study, the effect of design parameters is investigated. In each example, comparing the velocity distribution with that of the original design, it has been shown that the design modification affords more uniform distribution.