• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.11a
• /
• pp.63-63
• /
• 2002

현재 기계적 합금화법에서는 주로 합금을 구성하는 성분원소 분말을 불활성분위기에서 볼밀처리 함으로써 함금화를 시키거나 모합금에 산화물을 분산시켜 복합화시키는 공정을 통하여 각종 화합물, 비정질상 및 과포화고용체등의 준안정상의 합성 뿐만이 아니라 초미세조직의 생성에 관한 폭 넓은 분야의 연구가 행하여지고 있다. 한편 MA에서는 볼멀처리중 기계적 에너지의 투여에 의하여 실제 반응온도보다 낮은 온도에서 발생하는 특이한 화학반응 즉 Mechanochemical 반응을 일으키 기도 한다. 본 연구에서는 헤마타이트($Fe_20_3$)와 금속윈소인 Ti의 MA처리에 의하여 고상환원반응 을 유기시켜 $Fe-TiO_2$계 nanocomposite 분말재료를 제조하고자 한다. 특히 MA 공정에 있어서 자기 물성의 변화와 X선 회절을 통하여 고상환원반응에 의한 복합분말의 생성과정을 조사하였다. 출발원료는 $Fe_20_3$(고순도화학제,99.9%, 평균입경 0.1$\mu\textrm{m}$)와 금속원소인 Ti(99.9%, 명균업경 150$\mu\textrm{m}$)을 몰비 2:3의 조성이 되도록 하여 MA를 실시하였다. 볼멀은 고에너지 유성형 볼밀장치(독일 제, Fritsch P-5)를 이용하였으며 진공치환형 용기에 원료분말을 장입하여 2회정도 진공배기한 후 아르곤 가스를 충전하여 볼밀을 행하였다. 얻어진 분말시료에 대하여 x-선 회절장치, 전자현미경 (SEM) 및 진동시료형자력계(VSM)를 통하여 결정구조, 미셰조직 빛 자기특성을 조사하였다. $Fe_2O_3-Ti$ 혼합분말의 MA처리 에 의하여 초기단계부터 환원반응과 함께 $Fe_3TIO_{lO}$ 중간상이 관찰 되었으나 30hrs의 MA처리 후 Fe와 산화물 $TiO_2$로 모두 환원되어 $Fe-TiO_2$계 나노복합분말이 얻어짐을 알 수 있었다. 이 때 X션 회절피크의 line broadening으로부터 복합분말의 Fe 명균 결정립 크기는 24nm로 초미세 결정럽의 분말합금이었다. 포화자화값은 볼밀처리에 따라 점점 증가하여 MA 30시간에는 20.3emu/g로 포화됨을 알 수 있었다. 또한 보자력 Hc는 MA초기단계에 350e로 매우 낮으나 30시간 후에는 Hc값이 2600e로 매우 큰 값을 나타내었다. 이것은 환원반응결과 초기에 생성된 Fe의 결정립이 비교적 크고 결정결함이 적으나 볼밀처리를 30시간까지 행하면 Fe 결정렵의 미세화 빛 strain 증가로 magnetic hardening이 일어나기 때문인 것으로 사료된다.

• Journal of Life Science
• /
• v.14 no.2
• /
• pp.331-338
• /
• 2004

Growth and sexual differentiation of the seaweed Porphyra pseudolinearis Ueda have been investigated monthly in the intertidal zone of the East Sea, Korea. Young blades of P. pseudolinearis appeared at the beginning of October. Carp os pores were released at the end of November immediately after carposporangia formation. Then the thalli of P. pseudolinearis were extinguished at the end of March. Young thalli were budded through the stages of conchocelis and conchospore. Thalli showed lanceolate type in shape, cordate type in holdfast, absence of microscopic spinulate process and sexual generation. Ratios of length to width in female thalli ranged from 5.6 to 7.4 at the maturation in December and slightly decreased 3.3 to 4.8 in January and 4.9 to 7.3 in December while the ratios of male thalli ranged from 4.2 to 4.8 in January. On October 12, average five individuals were obsered in a quadrate (30 cm ${\times}$ 30 cm), 238$\pm$18 individuals for the maturation stage in December and then it was reduced to 150 individuals in February and 15 individuals in March. Average sex ratios for female, male and vegetative thalli were 31.3% 46.9% and 21.9% respectively in early December, the beginning time of sex maturation. The sex ratio of female and male thalli in December 17, changed to 69.4%, 30.6% respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1073-1080
• /
• 2005

In spite of many advantages of Meteor Burst Communications(MBC) on its transmission channel, the fact that its duty rate is less than 10 percents is a considerable deficiency of MBC. To overcome with this deficiency without paying large cost, we use a direct sequence(DS) simple reception system. This method doesn't need to add the components for acquisition or tracking the signal so that it keeps the cost efficiency of the MBC. But it has a disadvantage that its duty rate shows a large decline by noise. For this problem, we adopt the proposed system applying a positive feedback circuit. The improvement by this method is more significant when the received signal is weak. Simulation results show as tl is l00ms, then the burst length would be increased by $35\%$ when the initial value of the received signal power increases by 3 dB, t2 is 135ms. If the power increases by 6dB the burst length would be 170ms thus increased by $70\%$, which shows a great enhancement. Suppose now that tl is 50ms and the power is increased by 3dB, then t2 would be increased by $70\%$ to 85ms, and increasing the power by 6dB it would be increased by $130\%$ to 115ms.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.18-25
• /
• 2020

The purpose of this study is to investigate the mechanical and carbon-capture properties of foam concrete containing stainless steel argon oxygen decarbonization(AOD) slag. AOD slag was used as a binder, and foam concrete having a foaming ratio of 69 ± 0.5 % and a slurry density of 573.2 to 578.6 kg / ㎥ was produced. In order to examine the effect of carbonation, blended specimen was cured by two types : normal curing and CO₂ curing. As a result of the experiment, the specimens incorporating AOD slag showed higher compressive strength than Plain after CO₂ curing. According to the analysis of the image of foam concrete, it was confirmed that the ST30 has a lower total pore volume and average pore size than plain, resulting in high compressive strength. The SEM analysis confirmed the formation of calcite by carbonation of AOD slag. Through the thermogravimetric analysis, the increase of CO₂ uptake was confirmed by the incorporation of AOD slag. Foam concrete has a higher porosity than normal concrete, so it is expected that carbon-capture performance can be improved by using a AOD slag.

• Research in Plant Disease
• /
• v.9 no.1
• /
• pp.32-35
• /
• 2003

Pink rot of potato (Solanum tuberosum L.) occurred at Pyeongchang in Gangwon and at Bosung in Junnam province since 1999. The disease incidence in the surveyed areas was about 5% of harvested potatoes in 2002. Affected tubers showed a dull brown appearance and the lenticels and eyes on tubers turned dark brown. The cut surface of the diseased tuber colored faint pink and the entire surface of the diseased tuber becomes deep salmon pink within 30 min. The pathogen isolated from the diseased tubers was identified as Phytophthora erythroseptica based on morphological and cultural characteristics. Mycelial mat was fairly fluffy, rosette or stellate patterns and rounded or angular hyphal swellings were farmed in water, Temperature for mycelial growth was ranged from 5 to 3$0^{\circ}C$ and optimal temperature was $25^{\circ}C$. Non-papillate sporangia were persistent on stalk and ellipsoid, ovoid, obpyriform or distorted in shape, often with a constriction distal in the middle. Size of sporangia was 41.3~69.6$\times$26.8~47.4 (av, 55.5$\times$37.1) ${\mu}{\textrm}{m}$. Sexuality of Phytophthora erythroseptica was homothallic. Oogonia were 30~46 ${\mu}{\textrm}{m}$ in diameter and oospores were 28~35 ${\mu}{\textrm}{m}$ in diameter, Elongated or cyclindrical antheridia were all amphigynous. This is the first report on potato pink rot caused by Phytophthora erythroseptica in Korea.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.95-103
• /
• 1998

Acute and chronic responses to PCB toxicity of Neomysis awatschensis were studied by measurement of bioassay, growth, oxygen consumption and nitrogen excretion with concentrations of PCB at 10 and $20^{\circ}C$. 96 hr.-$LC_50$ at 10 and $20^{\circ}C$ were 28.7492 pub and 10.6742 pub, respectively. Survival rates during 60 days exposured to chronic PCB concentrations of 0.5 pub, 1.0 pub, 1.5 pub and 2,0 pub at $10^{\circ}C$ were $85\%,\;80\%,\;75\%$ and $75\%$, respectively and suwival rates at $20^{\circ}C$ $85\%,\;75\%,\;75\%$ and $65\%$, respectively. Average daily growth rate of N. awatschensis exposed to chronic PCB concentrations at $10^{\circ}C$ were 0.039 mm/day in control group and 0.036 mm/day at concentration of 2.0 ppb, while their rates at $20^{\circ}C$ showed 0.072 mm/day in central group and 0.039 mm/day at 2,0 ppb. The growth factors were some similarities between the chronic PCB concentrations, but intermolt periods were related to body size of mysids, temperature and PCB toxicity. Changes in oxygen consumption and nitrogen excretion rates during 60 days exposure to PCB toxicity showed higher in high groups of PCB concentrations. Assimilation and feeding rates of N. awatschensis fed Artemia sp. decreased with increase of PCB concentration at 10 and $20^{\circ}C$.

• Resources Recycling
• /
• v.21 no.2
• /
• pp.34-40
• /
• 2012

$Pt_{10}$/C, $Pt_9Mn_1$/C, $Pt_7Mn_3$/C electrocatalysts for Polymer Electrolyte Membrane Fuel Cells(PEMFCs) were synthesized by reduction with HCHO and their activity as a oxygen reduction reaction(ORR) was examined at half cell. The electrochemical oxygen reduction reaction(ORR) was studied by using a glaasy carbon electrode through cyclic voltammetric curves(CV) in a 1 M $H_2SO_4$ solution. The ORR activities of $Pt_9Mn_1$/C were higher than $Pt_{10}$/C, $Pt_7Mn_3$/C. Also potential-current curves of $Pt_9Mn_1$/C at 0.9, 0.8, 0.7, 0.6V for 5minutes respectively were higher than $Pt_{10}$/C, $Pt_7Mn_3$/C. Physical characterization was made by using x-ray diffraction(XRD) and transmission electron microscope(TEM). The TEM images of $Pt_9Mn_1$/C, $Pt_{10}$/C catalysts showed homogenous particle distribution with particle size of about 2.7 nm, 3 nm respectively and then the XRD results showed that the crystalline structure of the synthesized catalysts are seen FCC structure.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.4
• /
• pp.519-534
• /
• 2019

Mechanized tunneling methods, including shield TBM, have been increasingly used for tunnel construction because of their relatively low vibration and noise levels as well as low risk of rock-falling accidents. In the excavation using the shield TBM, it is important to design penetration rate appropriately. In present study, both subsurface investigation data and shield TBM excavation data, produced for and during ${\bigcirc}{\bigcirc}{\sim}{\bigcirc}{\bigcirc}$ high-speed railway construction, were analyzed and used to compare with shield TBM penetration rates calculated using existing penetrating rate prediction models proposed by several foreign researchers. The correlation between thrust force per disk cutter and uniaxial compressive strength was also examined and, based on the correlation analysis, a simple prediction model for penetration rate was derived. The prediction results using the existing prediction models showed approximately error rates of 50~500%, whereas the results from the simple model proposed from this study showed an error rate of 15% in average. It may be said, therefore, that the proposed model has higher applicability for shield TBM construction in similar ground conditions.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2021.04a
• /
• pp.21-21
• /
• 2021

주걱댕강나무는 경남 양산의 천성산에서만 생육하는 산림청·국립수목원 지정 희귀식물(Critically Endangered, CR)로 현지외 보전 및 대체 서식지 조성을 위해 번식 특성에 대해 알아보았다. 종자번식의 경우 450립의 종자를 저장방법에 따라 파종한 결과 노천매장 3.56%, 저온건조저장 0.67%, 습사저온저장 0.22%로 발아율이 매우 저조하였으며, 배양토 조건에 따라 직파 실험한 결과 모래 2.44%, 원예용 상토 2.22%, 현지내 산림토 1.11%, 현지외 산림토 0%로 이 또한 발아율이 매우 저조하였다. 삽목번식의 경우 숙지삽은 모래+펄라이트 36.1%, 모래 31.1%, 원예용 상토 20.0%로 나타났으며, 휴면지 삽수의 발근촉진제 처리 효과는 IBA 1,000PPM에서 37.8%, IBA 7,000PPM 30.0%, 무처리 28.9%, IBA 5,000PPM 27.8%의 발근율을 보였고 신초길이, 뿌리의 수, 뿌리 길이는 전반적으로 발근촉진제 처리와 함께 농도가 높아질수록 뿌리 성장이 왕성한 것으로 나타났다. 녹지삽은 모래 80%, 모래+펄라이트 76.7%, 피트모스+마사토 73.3%, 피트모스+펄라이트+버미큘라이트 70.0% 순이며, 왕모래와 왕모래+마사토는 26.7%와 36.7%로 다소 저조하였다. 녹지삽수의 굵기는 4mm이상 구간에서 발근율이 73.3%로 가장 높았으며, 녹지삽수의 길이는 7~8cm 구간에서 80.0%로 가장 높게 나타나 삽수의 굵기가 굵고 8cm내외의 길이가 효율적인 것으로 나타났다. 근삽은 발아율이 88.3~96.7%로 모든 배양토에서 높게 나타났다. 근삽수 직경 7~8mm에서 100%이며 3~4mm 또한 91%로 나타났다. 근삽수 길이는 4~5cm와 10~11cm에서 100%, 6~7cm 88.1%, 8~9cm 94.4%로 나타나 4~5cm를 제외하고는 삽수 길이가 길수록 신초 생장과 발근이 비례하는 것을 확인하였다. 주걱댕강나무는 실생보다 삽목번식이 더 효율적이며, 그 중 근삽이 가장 발근율이 높다. 배양토는 모래 단용구를 제외하고는 평균 95%이상으로 나타났으며, 근삽수는 직경이 굵고 길수록 신초 생장과 발근이 왕성하다. 따라서, 현지외 보전을 위해 향후 휴면성의 종자 발아 연구가 필요하며, 영양번식을 할 경우 근삽이 가장 효율적인 것을 확인하였다.

• Smart Media Journal
• /
• v.13 no.3
• /
• pp.18-26
• /
• 2024

Road surface monitoring is essential for maintaining road environment safety through managing risk factors like rutting and crack detection. Using autonomous driving-based UGVs with high-performance 2D laser sensors enables more precise measurements. However, the increased energy consumption of these sensors is limited by constrained battery capacity. In this paper, we propose a fusion sensor system for efficient surface monitoring with UGVs. The proposed system combines color information from cameras and depth information from line laser sensors to accurately detect surface displacement. Furthermore, a dynamic sampling algorithm is applied to control the scanning frequency of line laser sensors based on the detection status of monitoring targets using camera sensors, reducing unnecessary energy consumption. A power consumption model of the fusion sensor system analyzes its energy efficiency considering various crack distributions and sensor characteristics in different mission environments. Performance analysis demonstrates that setting the power consumption of the line laser sensor to twice that of the saving state when in the active state increases power consumption efficiency by 13.3% compared to fixed sampling under the condition of λ=10, µ=10.