• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.5 no.1
• /
• pp.87-93
• /
• 1969

A study has been made on phenomena of fertilization, hair genesis, and development of such forma of cotton flower as Mok Po 5, Red Leaf, Paymaster, Acala 1517w. 1) The pollen occurs to germinat at 4 hrs after its pollination and reaches the base of style 10 hrs. later, when 18 hrs elapsed, it gets enter at micropyle passes through placenta. 2) There may remain only one synergid as another one is occupied by pollen tube when it enters micropyle. 3) The fertilization completed at 18-48 hrs. after pollination. It was observed that Mok Po5 is the fastest, somewhat slower in Red Leaf and the slowest is the case of Paymaster in its speed. 4) Wool hair is formed by development of daughter cell which is. due to epidermal cell division' it starts its way right before blooming. 5) Wool hair is the most in its number covering about 60-80 within one hour ofter pollination and finishes its forming within 4-6 hours. The number is more abunbant at basal portion of ovule and rather at outer surface than at inner one of it. 6) The average length of wool hair checked at different time limit is as follows. 2.7-8.3$^{\mu} m$ 1 hr after pollination. 43.3-263.7$^{\mu} m$ 24-48 hrs. after pollination. The growth speed both of Mok Po 5 and Red Leaf get nearly same value but Paymaster is somewhat slower in its speed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.1 no.1
• /
• pp.9-18
• /
• 1968

A series of experiments since 1963 ha sbeen made on the artificial propagation of Penaeus oriental is for the purpose of improving breeding of the prawn. The results are as follows: 1. Spawning takes place in the evening, and almost completes before 10 o'clock p. m.. Number of spawns deposited by a prawn is 30,000 to 150,000. 2. Deposited spawns become nauplius stage after approximately 18 hours (about 13 hours in hatching tanks) at water temperature of $23\~25^{\circ}C$, and grow to first nauplius stage in subsequent 28 hours. 3. It takes about five days from first nauplius stage to zoea stage, and additional four or five days from first zoea stage to first mysis stage. 4. It takes approximately 2 to 3 weeks from spawning to post larva. 5. Hatching rate ranged from $1.4\%$ to $14.9\%$, with the average of $6\%$ in 1966 and $10\%$ to $35\%$ averaging $20\%$ in 1967.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.165-173
• /
• 2004

H.264 is the newest international video coding standard that provides high coding efficiency. A macroblock in H.264 has 7 different motion-compensation block sizes in the Inter mode, and several different prediction directions in the Intra mode. In order to achieve as highest coding efficiency as possible, H.264 reference model employs complex mode decision technique based on rate-distortion (RD) optimization which requires high computational complexity. In this paper, we propose two techniques -'early SKIP mode decision' and 'selective intra mode decision' - which can further reduce the computational complexity. Simulation results show that without considerable performance degradation, the proposed methods reduce encoding time by 30% on average and save the number of computing rate-distortion cost by 72%.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.117-120
• /
• 2006

최근 표준이 완료된 H.264/AVC는 기존의 비디오 압축 표준과 비교하여 높은 압축 성능을 보이지만 부호기에서 사용되는 Rate-Distorion Optimization(RDO) 기술은 모든 매크로블록 모드에 대해 부호화 과정을 수행 후 최적의 매크로블록 모드를 결정하기 때문에 부호기의 복잡도를 상당히 증가시킨다. 본 논문에서는 부호화할 블록 내의 가로와 세로 방향의 화소 유사성 정보를 이용하는 H.264/AVC의 화면 내(Intra) 예측을 위한 새로운 고속 모드 결정 방법을 제안한다. RDO를 통해 최적의 모드로 결정된 화면 내 예측 모드의 블록 내 가로와 세로 방향의 화소 유사성을 분석해 본 결과, 예측 모드에 따라서 그 유사성이 뚜렷한 차이를 보이는 것으로 나타났다. 따라서 제안하는 방법은 화소 유사성 정보를 이용하여 후보 블록 모드의 수를 줄임으로서 PSNR(peak signal-to-noise ratio)의 감소가 거의 없이 화면 내 부호화 시간을 평균 약 70% 가까이 줄일 수 있었다.

• Information and Communications Magazine
• /
• v.24 no.12
• /
• pp.65-73
• /
• 2007

2007년8월 v2.0을 출간하면서 표준화가 완료된 Ultra Mobile Broadband(UMB) 기술은 진보된 안테나 기술과 함께, CDMA, TDM, Layer-superposed OFDM(LS-OFDM), OFDM, OFDMA의 장점들을 하나의 Air Interface로 통합하였으며, 효율적인 자원 관리 기법을 통해 더 많은 VoIP 사용자들을 수용할 수 있게 해준다. 4x4 안테나를 사용시 20MHz의 주파수 대역에 순방향 288 Mbps, 역방향 75 Mbps의 최대 전송률을 제공하며, 양방향에 대한 평균 Network 지연시간은 약 16.8 ms을 지원하고, 10 MHz 주파수 대역에 1000명 이상의 VoIP 사용자를 지원할 수 있다. 본 고에서는 UMB의 표준화 과정 및 현황 그리고 물리 계층과 MAC 계층의 요소 기술들에 대해 고찰한다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.77-84
• /
• 2012

Purpose: To develop a geometrical quality control real-time analysis program using an electronic portal imaging to replace film evaluation method. Materials and Methods: A geometrical quality control item was established with the Eclipse treatment planning system (Version 8.1, Varian, USA) after the Electronic Portal Imaging Device (EPID) took care of the problems occurring from the fixed substructure of the linear accelerator (CL-iX, Varian, USA). Electronic portal image (single exposure before plan) was created at the treatment room's 4DTC (Version 10.2, Varian, USA) and a beam was irradiated in accordance with each item. The gaining the entire electronic portal imaging at the Off-line review and was evaluated by a self-developed geometrical quality control real-time analysis program. As for evaluation methods, the intra-fraction error was analyzed by executing 5 times in a row under identical conditions and procedures on the same day, and in order to confirm the infer-fraction error, it was executed for 10 days under identical conditions of all procedures and was compared with the film evaluation method using an Iso-align$^{TM}$ quality control device. Measurement and analysis time was measured by sorting the time into from the device setup to data achievement and the time amount after the time until the completion of analysis and the convenience of the users and execution processes were compared. Results: The intra-fraction error values for each average 0.1, 0.2, 0.3, 0.2 mm at light-radiation field coincidence, collimator rotation axis, couch rotation axis and gantry rotation axis. By checking the infer-fraction error through 10 days of continuous quality control, the error values obtained were average 1.7, 1.4, 0.7, 1.1 mm for each item. Also, the measurement times were average 36 minutes, 15 minutes for the film evaluation method and electronic portal imaging system, and the analysis times were average 30 minutes, 22 minutes. Conclusion: When conducting a geometrical quality control using an electronic portal imaging, it was found that it is efficient as a quality control tool. It not only reduces costs through not using films, but also reduces the measurement and analysis time which enhances user convenience and can improve the execution process by leaving out film developing procedures etc. Also, images done with evaluation from the self-developed geometrical quality control real-time analysis program, data processing is capable which supports the storage of information.

• The KIPS Transactions:PartC
• /
• v.14C no.4
• /
• pp.371-382
• /
• 2007

In this paper, we propose a real-time sensor node platform that efficiently manages periodic and aperiodic tasks. Since existing sensor node platforms available in literature focus on minimizing the usage of memory and power consumptions, they are not capable of supporting the management of tasks that need their real-time execution and fast average response time. We first analyze how to structure periodic or aperiodic task decomposition in the TinyOS-based sensor node platform as regard to guaranteeing the deadlines of ail the periodic tasks and aiming to providing aperiodic tasks with average good response time. Then we present the application and efficiency of the proposed real-time sensor node platform in the sensor node equipped with a low-power 8-bit microcontroller, an IEEE802.15.4 compliant 2.4GHz RF transceiver, and several sensors. Extensive experiments show that our sensor node platform yields efficient performance in terms of three significant, objective goals: deadline miss ratio of periodic tasks, average response time of aperiodic tasks, and processor utilization of periodic and aperiodic tasks.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.3
• /
• pp.57-66
• /
• 2011

The current trend of the handover authentication delay time is gradually increased according to the interworking between 3G cellular network and WLANs. Therefore, authentication mechanism minimized in delay is required to perform the seamless handover and support the inter-subnet and inter-domain handover. In this paper, we propose a novel pre-authentication scheme based on the fast channel switching which directly performs the authentication with the next access point in advance. In addition, the proposed scheme is efficient in the inter-domain handover and can be easily implemented in current WLANs since it just modifies the client side of user. To analysis and evaluate our scheme, we compare the packet loss ratio and the delay time with the two standard 802.11 authentication schemes. The analytical results show that our scheme is approximate 10 times more effective than the standard schemes in packet loss and the delay time is minimized down to 0.16 msec.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.89-97
• /
• 2016

This paper addresses the problem of the construction planning of artillery positions, for which we present an optimization model and propose a heuristic algorithm to solve problems of practical size. The artillery position construction plan includes the assignment of engineers to support the artillery and the schedule of the support team construction sequence. Currently, in the army, managers construct the plan based on their experience. We formulate the problem as a mixed integer program and present a heuristic that utilizes the decomposition of the mixed integer model. We tested the efficacy of the proposed algorithm by conducting computational experiments on both small-size test problems and large-size practical problems. The average optimality gap in the small-size test problem was 6.44% in our experiments. Also, the average computation time to solve the large-size practical problems consisting of more than 200 artillery positions was 79.8 seconds on a personal computer. The result of our computational experiments shows that the proposed approach is a viable option to consider for practical use.

• Journal of KIISE:Software and Applications
• /
• v.37 no.4
• /
• pp.273-281
• /
• 2010

In this paper, we propose an automatic segmentation method of the endo- and epicardial boundary by using ray-casting profile based on intensity distribution and gradient information in CT images. First, endo-cardial boundary points are detected by using adaptive thresholding and seeded region growing. To include papillary muscles inside the boundary, the endo-cardial boundary points are refined by using ray-casting based profile. Second, epi-cardial boundary points which have both a myocardial intensity value and a maximum gradient are detected by using ray-casting based adaptive gradient profile. Finally, to preserve an elliptical or circular shape, the endo- and epi-cardial boundary points are refined by using elliptical interpolation and B-spline curve fitting. Then, curvature-based contour fitting is performed to overcome problems associated with heterogeneity of the myocardium intensity and lack of clear delineation between myocardium and adjacent anatomic structures. To evaluate our method, we performed visual inspection, accuracy and processing time. For accuracy evaluation, average distance difference and overalpping region ratio between automatic segmentation and manual segmentation are calculated. Experimental results show that the average distnace difference was $0.56{\pm}0.24mm$. The overlapping region ratio was $82{\pm}4.2%$ on average. In all experimental datasets, the whole process of our method was finished within 1 second.