• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.613-617
• /
• 2006

Bed material in natural streams is affected by geological characteristics of upstream and acting focre by flow of stream. Acting force in streams are also affected by bed slope and discharge of streams. Yamamoto(1994) suggested that channel reaches with similar slope share similar characteristics values in representative bed material size, tractive force, channel width and depth. He also suggested that main factors dominating channel characteristics are mean annual discharge, epresentative bed material size and bed slope. Bed material shows physical and ecological characteristics of channels. In this research, characteristics of bed material in natural or close to natural streams were studied and compared with Janpanese stream data. In the result, characteristics of gravel and sand material can be presented in the term of non-dimensional tractive force, bed slope and bed material size.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.2
• /
• pp.89-96
• /
• 2005

This study carried out to investigate the effects of the types of animal manure and the dogies of the slope on productivity of com and the runoff of nitrogen and phosphorus in corn cultivation soil. Main plots were consisted of the degrees of slope, such as $0\%\;9\%$ and $18\%$ and the subplots on consisted of the types of animal manure, such as chemical fertilizer (CF), compost of swine manure fermented with sawdust (CSMFS), and cattle slurry (CS). Erosion was constructed with 0.33 m width, 3 m length and 0.4 m height. The results obtained were summarized as follows; 1. Dry matter(DM) yield of corn decreased by an enhancement of the degrees of slope DM yield reveals that there is an increase in order CS > CF > CSMFS. 2. Nitrogen contents of the whole corn reveals that there is an increase in order CF>CS>CSMFS. However, nitrogen content was not affected by the degrees of slope. 3. Nitrogen yields (NY) of com decreased by an enhancement of the degrees of slope. NY of CS increased more than 2.0 fold as compared CSMFS. 4. Mineral nitrogen content in the runoff during the experiment was hardly influenced by both the degrees of slope and the types of animal manure. 5. $NO_3$ - N in the runoff during the experiment increased by an enhancement of the degrees of slope. 6. In the degrees of slope used in this experiment, $NH_4$-N and $PO_4$-P content in runoff was lower than 8 ug / ul and 1 ug/ul, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1001-1005
• /
• 2010

본 연구는 식생지름에 따른 식생된 복단면 하천에서 수리특성에 관한 것이다. 또한 국외에서 개발된 모형들의 차이점과 적용가능성을 조사하는 것이다. 연구결과로써 주수로의 유속은 식생밀도 증가에 따라 증가하는 동안 경계면마찰계수는 감소하다가 어느 식생밀도 지점부터 일정하였다. 하상경사가 0.5 ‰와 식생직경이 12 mm일 경우 경계면마찰계수에 대한 Pasche 모형은 10.9 %, Bertram 모형은 12.4 %, Mertens 모형은 16.8 % 평균오차를 발생시켰다. 그러나 식생밀도가 증가할수록 Nuding 모형의 오차가 증가함을 볼 수 있으며, 평균오차가 60.5 % 발생되었다. 주수로의 실측된 유속에 대한 Pasche 모형의 평균오차는 2.8 %, Mertens 모형의 평균오차는 8.3 %, Bertram 모형의 평균오차는 14.7 %, Nuding 모형의 평균오차는 11.8 %이다. 그러므로 Pasche 모형은 실제 복단면 하천에 적용하기 위해 더 유용하다. Strickler 계수를 사용한 Bertram 모형은 다른 모형보다 계산이 복잡하지 않고 측정된 마찰계수 및 유속값과 잘 일치한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.8 no.2
• /
• pp.45-51
• /
• 1990

DEM must have a high accuracy against the actual topographic model. A model which can compute heights responding to random plane position by using of the topographic data and interpolation must be constructed. Interpolation affected by the accuraccy of the observations included noise, which affected by the slop and curvature weight. Data smoothing is a method to reduce the noise. Average declination and area ratio are variable which result similarity in according to slope. But in local area, area ratio well shows a local change. This study try to classify the terrain by the declination to analysis the effects of the declination and curvature weights, and then to represent the most probable model. The result are following : In terrain classification by the slop, p16 and p24 were fitted in the plane surface fit p16 and S in the varying surface, and S and p24 in the irregular surface in classification by curvature, p24 and S were fitted in the plane or varying surface, and p16 in the irregular surface In case of hybrid, p16, p24 and S are fitted in the plane, varying and irregular surface respectively. Smoothing is the most effective in case of slope of 50 persentage and of curvature weight of 0.0015.

• Journal of Korea Water Resources Association
• /
• v.50 no.5
• /
• pp.289-302
• /
• 2017

DFB (Divergence Form for Bed slope source term) was rigorously derived and the error of mDFB using mean water depth at the cell face in DFB was clearly demonstrated. In addition, DFB technique turned out to be an exact method to the bed slope source term. The existing volume/free-surface relationship to the PSC (Partially Submerged Cell) has been corrected. It was discussed that treatment for the partially submerged edge is required to satisfy the C-property in PSC. It is expected that this study will provides a more accurate means in analyzing the shallow water equations with the approximate Riemann solver.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.505-509
• /
• 2006

본 연구에서는 수위변화에 따라 흐름특성이 달라지는 경사수제의 적절한 설계를 위해 수리실험을 통해 경사수제 주변의 흐름 특성을 파악하였다. 수리실험은 $2m(B){\times}40m(L){\times}1m(H)$의 직선 수로에서 수행되었으며, 수제 주변 흐름장은 LSPIV 기법을 이용하여 측정하였다. 수심변화에 따른 수제주변 특성은 수심과 수제높이의 비 $d/h_g$를 $0.60{\sim}0.97$ 범위로 설정하여 $d/h_g$ 변화에 따른 재순환영역의 변화 특성과 본류역의 유속분포 변화를 파악하였다. 실험결과 재순환영역의 폭과 길이는 수심이 증가함에 따라 감소하는 것으로 나타났으며, 제방보호 길이 설정을 위한 재순환영역의 길이는 $d/h_g=0.6{\sim}0.97$에 대해 수제의 길이의 $2{\sim}4$ 배가 발생하는 것으로 나타났다. 또한 수제부근의 유속분포를 측정한 결과, 제방부근 수제역의 역류속은 평균유속의 최대 0.3 배인 것으로 나타났으며, $d/h_g=1$에 가까울수록 역류발생은 미미한 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.60-67
• /
• 2011

A repeated impregnation and carbonization process was introduced to product high-density woodceramics using a resin impregnation board. The density profile were measured to further confirm morphologically and structurally occurred changes of one-time and two-time phenolic resin-treated and carbonized woodceramics. After the two-time carbonization of the products, the minimum, average and maximum densities increased more than those of the one-time carbonized woodceramics, and the increase of density profile. Therefore, it is considered that the preparation of uniformed woodceramics with high-density and low density dissipation can be produced by a repeated impregnation and carbonization).

• Journal of the Korean Magnetics Society
• /
• v.2 no.2
• /
• pp.132-139
• /
• 1992

We have designed a magnetic field gradient useful for cylindrical imaging in NMR-CT. The direc¬tion of the designed field is parallel to the axis and the gradient in the radial direction of cylindrical coordinate is monotonically increasing. The ratio of the gradient in the radial and axial direction is greater than 10 near the center of coordinate. This ratio depends on solenoid length, the number of reverse current turns at center, and the amount of the reverse current. We built a gradient coil based on the numerical simulation and tested the field generated by NMR-CT. The resulting image matches with the theoretical expectation within 10% error. Since the data acquisition time of 1-D imaging is significantly shorter than 2-D imaging, it becomes possible to image much more dynamic objects by the use of this gradient field.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.4
• /
• pp.417-423
• /
• 2011

Purpose: This study was to investigate that near gradient AC/A ratio could be used to prescribe a patient with distance exophoria, we compared the difference between distance gradient AC/A ratio and near gradient AC/A ratio. Also, this thesis was to understand the relationship between calculated AC/A ratio and gradient AC/A ratio. Methods: Objective and subjective refractive error were corrected and we used Howell (3 m) chart for distance phoria tests and Howell-Kim (40 cm) chart for near phoria tests. The near gradient AC/A ratio and calculated AC/A ratio were used by Howell-Kim (40 cm) combined with +1.00 D, -1.00 D, +2.00 D and -2.00 D. Results: The average value of distance exophoria was 1.17${\pm}$1.17 $\Delta$, and the average value of near exophoria was 3.71${\pm}$2.80 $\Delta$ (t-test. p<0.001). The correlation of distance phoria with near phoria was little higher (r = 0.59, p < 0.001). Gradient AC/A ratios depending on measuring distance and stimulus were higher (r = 0.11~0.53. P < 0.001), when distance was shorter and stimulus to accommodation was more. Also, stimulus to accommodation by plus lens was higher than stimulus to accommodation by minus lens (paired t-test. p < 0.001). There was negative correlation between calculated AC/A ratio and gradient AC/A ratio. As the calculated AC/A ratio was higher, gradient AC/A ratio was lesser. Near gradient AC/A ratio was slightly higher than distance gradient AC/A ratio. Distance and near gradient AC/A ratio taken through the subjective -1.00 D were 1.30 $\Delta$/D and 1.68 $\Delta$/D(t-test. t=1.67, p < 0.001). Conclusions: There is negative correlation between calculated AC/A ratio and gradient AC/A ratio. Also, there is subtle difference between near gradient AC/A ratio and distance gradient AC/A ratio. Therefore, we need to measure distance gradient AC/A ratio when a practitioner prescribe glasses for a patient with distance exophoria.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1997.10a
• /
• pp.68-72
• /
• 1997

사천진항은 동해안에 위치한 제1종 어항으로 강원도 강릉시에 소재하고 있는 항구로서 남북쪽에 비교적 긴 모래 해안이 발달해 있으며 항 남단으로 사천천 하구와 연결되고 있다. 항북쪽으로는 연곡천, 남쪽 아래쪽에서는 남대천이 흐르고 있으며 해안은 1/40-l/60의 대체로 완만한 경사를 이루고 있다. 사천진항은 태풍의 내습이 없는 항으로 탁월풍은 SW, 평균풍속은 2.7㎧로서 년 강우량이 1383mm이며 조석관계는 평균조차가 13cm, 대조차가 약 17cm, 소조차가 약 9cm로서 작은 조차를 보이고 있다. (중략)