• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.430-440
• /
• 2000

A series of studies such as geological logging data analysis, detailed geological survey, rock mass evaluation, in-situ and laboratory tests, rock strength and mechanical properties of the rock were concerned. The stability of the slope were carried out inorder to design the pit slope and individual benches using the stereographic projection analysis and numerical methods in Roto Pit of Pasir coal field. The bedding plane was one of the major discontinuities in the Roto Pit and the dip of which is about 60$^{\circ}$ in the northern part and 83$^{\circ}$ in the southern part. The dip of bedding becomes steeper from north to south. The plane and toppling failures are presented in many slopes. In laboratory test the average uniaxial compressive strength of mudstone was 9MPa and that of weak sandstone was 10MPa. In-situ test showed that the rocks of Roto north mining area are mostly weak enough to be classified in grade from R2(weak) to R3(medium strong weak) and the coal is classified in grades from R1(Very weak) to R2(Weak). The detailed stability analysis were carried out on 4 areas of Roto north (east, west, south and north), and 2 areas of Roto south(east and west). In this paper, the minimum factor of safety was set to 1.2 which is a general criterion for open pit mines. Using the stereographic projection analysis and the limit equilibrium method, slope angles were calculated as 30∼36$^{\circ}$ for a factor of safety greater than 1.2. Then these results were re-evaluated by numerical analysis using FLAC. The final slope angles were determined by rational described above. A final slope of 34 degrees can guarantee the stability for the eastern part of the Roto north area, 33 degrees for the western part, 35 degrees for the northern part and 35 degrees for the southern part. For the Roto south area, 36 degrees was suggested for both sides of the pit. Once the pit slope is designed based on the stability analysis and the safety measures, the stability of slope should be checked periodically during the mining operations. Because the slope face will be exposed long time to the rain fall, a study such aspreventive measures against weathering and erosion is highly recommended to be implemented.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.3
• /
• pp.289-296
• /
• 1985

To clarify the soil characteristics and genesis of the clayey terrace soils distributed in Yeongcheon (inland region) and Yeongil (coastal region), 9 typifying pedons including a recent local deposits were studied. The physico-chemical properties found were summarized as follows; 1. The contents of available water of the terrace soils were ranged from 12.0 to 20.3%. They were increased with increaseing clay content up to 35%, and then decreased at clay content of 35 to 55%, but were maintained about 12 to 13% when the clay content exceeds 55%. 2. The amount of water stable aggregates in the surface soils were ranged from 55.0 to 81.1%, and were low in cultivated upland where water erosion were accelerated while high in the paddy where the double cropping were practiced. The index of aggregate in cultivated upland were higher in the surface soils but the paddy soils were higher in subsoils. 3. The colloidal reactions checked by the differences between pH in $0.01N-Na_2SO_4$ and $H_2O$ indicate exchangeable acidity to exchangeable neutrality, which means a sort of Red-yellow soil forming process had been prevailed during genesis of the terrace soils. 4. Cation exchange capacity of the clayey terrace soils were averaged about 15.8-20.2me/100g of fine earth and 35.6-52.6me/100g of clay. The rates of base saturation were 32.7 to 57.6% and the rates decreased with increasing the elevations of terraces. 5. The activities of free iron oxides were 0.061 to 0.739 and the values decreased with increasing elevation while the crystallinity index of iron oxides positively correlated with elevations the values ranged from 0.067 to 0.537.