• Journal of Advanced Marine Engineering and Technology
• /
• v.16 no.3
• /
• pp.42-50
• /
• 1992

다공성 물질이 충전된 밀폐용기 내에서 수용성 이원혼합용액($H_2O{+}NaCl$)이 수평한 상부전열면으로 부터 동결될 때 혼합용액의 초기농도, 액체의 과열 및 다공성물질의 입자직경 크기가 온도와 농도분포에 미치는 영향을 실험하였으며, 동결이 진행됨에 따라 이동하는 고액상 혼합영역의 계명위치를 측정하였다. 다공성물질은 평균직경이 2.85mm, 6mm인 구형의 유리구슬을 이용하였다. 수용성 혼합용액의 초기농도는 공융농도도 이하로 하였으며 상부 전열면은 공융온도 이하로, 하부전열면은 액상선온도 이상으로 유지하여 동결 실험한 결과 상부 전열면으로 부터 고체 영역, 고액상혼합영역, 액체영역으로 구분되었다. 액체의 초기농도가 5%인 경우 과냉현상이 관찰되었으나 10%, 15%인 경우 액체온도는 액상선 온도보다 더 높았다. 용액의 초기농도를 감소시킬수록 고체와 고액상혼합영역의 범위는 증대되었으며 고액상혼합영역과 고체영역의 계면은 더욱 강해진 자연대류에 의하여 2차원성이 증가된 형상을 보였다. 용액의 자연대류는 다공성물질의 직경이 클수록 증가되었으며 계면에서의 제융해현상은 관찰되지 않았다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.874-876
• /
• 2005

본 논문에서는 지하에 매설된 통신 관로의 상태를 조사하기 위해, 레이저 투영 영상을 이용한 관로의 최소 직경을 산출하는 새로운 방법을 제안한다. 투영 영역을 정확히 분할하기 위하여 새로운 색차 모델과 다중 임계치를 적용하였다. 관로의 투영 단면은 레이저가 투영된 곡선의 형상에 나타나므로 곡선의 최소 직경을 계산하여 관로가 찌그러져 있거나 이물질이 존재하는 것을 구분할 수 있다. 제안하는 기법은 100mm의 정상 관로에서 평균 1.83mm의 오류를 나타내어 관로의 상태를 조사하는 기법으로 사용이 가능하다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.3
• /
• pp.31-39
• /
• 1999

In this paper, numerical experiment is attempted to analyze and compare the combustion efficiency of the burning sprays due to OFO, FOF triplet / FOOF split doublet injectors. Preconditioned Wavier-Stokes equation system with low Reynolds number $\kappa$-$\varepsilon$ model for turbulence closure, is LU-SGS time-integrated. Spray processes are modeled by DSF analysis with experimentally determined injection characteristics. n-heptane/air global reaction model approximates the combustion for simplicity, and the influence of turbulence on the chemical reaction is included using eddy dissipation model. The results showed the FOF triplet injector of highest combustion efficiency, whereas the OFO type of poet performance. It was also observed that the droplet mean diameter and the average gas temperature due to the mixing efficiency, are the representative parameters for the performance design of combustion.

• Journal of Korean Society of Forest Science
• /
• v.84 no.2
• /
• pp.247-257
• /
• 1995

This research carried out forest community classification on the basis of the methods of ZM school, in order to furnish useful information needed for forest management, and for afforestation and preservations of Abies koreana forest which was Korean native species, and the research results could be summarized as follows. Abies koreana forest was divided into 10 vegetation units ; This forest was divided into Abies koreana-Quercus mongolica community and Abies koreana-Sasa quelpartensis community. Abies koreana-Quercus mongolica community was divided into Tripterygium regelii group, Patrinia saniculaefolia group, and Typical group, and Tripterygium regelii group seas divided into Typical subgroup. Pimpinella brachycarpa subgroup, and Hemirocallis fulva subgroup. Abies koreana-Sasa quelpartensis community was divided into Berberis koreana group, Trachelospermum asiaticum var. intermedium group, and Typical group. Berberis koreana group was divided into Typical subgroup and Hepatica asiatica subgroup, and Tranchelospermum asiaticum var. intermedium group was divided into Hepatica asiatica subgroup and Typical subgroup. According to the results of the analysis by coincidence method, Abies koreana-Quercus mongolica community represented in Mt. Chiri, Mt. Deokyu and Mt. Kaya which were located in the Sobaek mountains, Abies koreana-Sasa quelpartensis community represented in Mt. Hanla. Therefore it was thought that Abies koreana forest was classified by geographical position, and vegetation units of Abies koreana forest tended to be classified by the altitude and topography. As for DBH and height of Abies koreana, mean DBH and height of Abies koreana-Quercus mongolica community were each 28.4cm, 10.6m that were larger than mean DBH and mean height(each 23.6cm, 6.3m) of Sasa quelpartensis community. Among Abies koreana-Quercus mongolica community, Patrinia saniculae-folia group had the smallest mean DBH and mean height(20cm, 5m), and among Abies koreana-Sasa quelpartensis community, Typical group had the smallest mean DBH and mean height(4cm, 3m).

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.7-11
• /
• 1997

직경 3.5 cm, 길이 1.5 m 의 석영관 내에서 염화제1철 증기를 수소로 환원하여 철 초미립자를 제조하였다. 염화제1철의 증발조건, 염화제1철 증기와 수소의 혼합방법, 반응물의 예비가열온도, 반응온도, 염하제1철의 농도, 반응기내 체류시간이 생성된 철 입자의 크기 및 크기분포에 미치는 영향을 조사하였다. 철 입자의 평균직경은 40-88 cm 이고, 기하표준편차는 1.4 정도로 나타났다. 철 입자들은 자기적 성질에 의해 서로 연결되어 체인을 형성하였으며, 전자회절분석 결과 단결정이었다. 평균입경 55nm 철 입자들의 항자력은 900 Oe, 포화자화값은 130 emu/g 이었다.

• Korean Journal of Environment and Ecology
• /
• v.33 no.4
• /
• pp.440-446
• /
• 2019

This study examined the growth and fruiting characteristics and the acorns biomass allometric equation of Quercus acuta to provide reference data related to the growth and seed supply during the restoration of evergreen forest in the warm temperate zone in Wando Island, Korea. For the growth survey, we selected and cut three sample trees having a mean diameter at breast height (DBH) to investigate the growth analysis through a stem analysis. We then developed the allometric equation (Y=aX+b) of DBH and tree height growth characteristic (Y) according to the average tree age (X) of sampled trees and estimated the DBH and tree height according to the age of Quercus acuta. For the fruiting survey, we selected and cut three sample trees with full fruit in August when, they are at the early mature fruiting stage, for the analysis. To develop the acorns/tree biomass allometric equation of Quercus acuta, we selected and cut ten sample trees of evenly divided diameters. The acorns biomass allometric equation ($Y=aX^b$) was derived by analyzing the biomass (Y) and the growth characteristics (X), such as the DBH, tree height, crown width, and crown height. The allometric equations of average tree age according to DBH and tree height were Y=0506X-2.064 ($R^2=0.999$) and Y=0.321X+0689 ($R^2=0.992$), respectively. The developed allometric equations estimated that the DBH were 3.0cm, 8.1cm, 13.1cm and 18.2cm while the tree heights were 3.9m, 7.1m, 10.3m, and 13.5m when the tree ages were 10, 20, 30, and 40 years, respectively. The analysis results of fruiting characteristics showed that the length, the diameter, the number of fruits, and the number of acorns per fruiting branch had the statistically significant difference and tended to decrease from the upper part to the lower part of crown downward. The total number of acorns was 1,312 acorns/tree in the upper part, 115 acorns/tree in the middle part, and 5 acorns/tree in the lower part of the crown. The allometric equation for the amount of acorns with DBH as an independent variable was $Y=0.003X^{4.260}$ with the coefficient of determination at 0.896. Although the coefficient of determination of the allometric equation using only DBH as the independent variable was lower than that using DBH and tree height ($D^2H$), it would be more practical to consider only DBH as the independent variable because of measurement errors.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.1
• /
• pp.32-38
• /
• 2018

Purpose: The purpose of present study was to retrospectively analyze the survival rate of narrow diameter implant less than 3.6 mm by initial stability and radiographic measurements. Materials and Methods: In total, 24 patients who received 38 narrow diameter implants (${\leq}3.6mm$ in diameter, ${\geq}7mm$ in length) were enrolled in this retrospective study. The cumulative survival rate was calculated and various factors were investigated according to the implant platform diameter, body diameter, length, position, concomitant use of guided bone regeneration in implant placement and final prosthesis type. Initial stability was investigated with implant stability quotient (ISQ) value. The mesial and distal marginal bone level (MBL) change was calculated with radiography. Results: The overall survival rate was 92.11%. Mean ISQ value and MBL change of survival implants was 66.26 and $0.14{\pm}0.31mm$, respectively. None of the implants with platform diameters larger than the body diameter failed. Conclusion: In conclusion, the findings of present study suggest that narrow diameter implant could be predictable treatment in narrow alveolar ridge.

• Journal of Korean Society of Forest Science
• /
• v.85 no.1
• /
• pp.120-129
• /
• 1996

This study was carried out to investigate the hydraulic architecture such as relative hydraulic conductivity, Leaf specific conductivity(LSC), Huber value, Specific conductivity of the stem, branch and Junctions of stem-to-branch in Quercus mongolica trees. The hydraulic architecture of various hydraulic conductivities of stem and branch was described. The results obtained were summarized as follows : 1. The range of relative hydraulic conductivity was $2.5526{\times}10^{-12}$ to $1.2260{\times}10^{-10}m^2$ in stems, $1.6279{\times}10^{-11}$ to $6.8378{\times}10^{-11}m^2$ in branches. The relative hydraulic conductivities increased with decreasing diameter of stem and branch. The relative hydraulic conductivity of one-year-old terminal shoots were two times greater than that of the lateral shoots. 2. LSC value was larger at the top than at the base in stem. LSC is much smaller in branches than in stem ; especially smallest at branching part. 3. Hydraulic conductivities of the branching part appeared the different values with the 4 type and 4 type. Relative hydraulic conductivity, LSC, Specific conductivity and mean vessel diameter in type branching part were larger in stem than in branch part, but not found in the branching part of Y type. 4. LSC and Specific conductivity of stem increased with decreasing diameter, but Huber value slowly increased with decreasing diameter ; especially highest at less than 1cm diameter. 5. LSC, Huber value, and mean diameter of vessels were larger at 1-year-old leader shoots than at lateral shoots. 6. The mean vessel diameter in various parts of a tree decreased with decreasing diameter of stem, but the number of vessels per unit area($mm^{-2}$) increased reversely. Mean vessel diameter in stem decreased sharply at earlywood and slowly at latewood with decreasing diameter of stem.

• Korean Journal of Environment and Ecology
• /
• v.14 no.3
• /
• pp.175-182
• /
• 2000

본 연구는 자연생태계 소목의 생장에 따른 탄소저장 및 흡수량 지표를 도출하고 용인시를 대상으로 임상유형의 영급별 탄소저장 및 흡수를 계량하였다. 침엽수 1주당 탄소저장 및 흡수량은 중부와 남부의 생장지역간 유의한 차이가 없었으나(p>0.05). 활엽수의경우는 남부지역에서 중부지역보다 더욱 많았다. 수목 1주당 탄소저장 및 흡수량은 활엽수가 동일 직경의 침엽수보다 더욱 많았으며, 그 차이는 직경생장과 더불어 증가하는 경향을 보였다. 용인시 자연생태계의 단위면적당 평균 탄소저장 및 흡수량은 역시 영급이 높을수록 많았으며, II 영급을 제외한 동일 영급내에서는 침엽수림보다는 혼효림이, 혼효림보다는 활엽수림이 더욱 많았다. 중부지역에서 생장하는 흉고직경 20cm 의 활엽수 1주는 약 175리터의 휘발유 소비로 인하여 배출되는 탄소량을 저장하고, 1ha의 IV 영급 활엽수림은 시민 57명이 화석연료 소비로 연간 배출하는 탄소량을 저장하였다. 본 연구의 탄소저장 및 흡수 지표는 직경 생장에 따른 삼림수목의 대기탄소농도 저감 가치를 용이하게 추정하는데 활용될 수 있다.

• Journal of Korean Society of Forest Science
• /
• v.98 no.3
• /
• pp.324-330
• /
• 2009

The objective of this study is to estimate the carbon sequestration in forest stands using KOMPSAT-2 imagery. For estimating the amount of carbon sequestration, the stand biomass of forest was estimated with the total weight, which was the sum of individual tree weight. Individual tree volumes could be estimated by the crown width extracted from KOMPSAT-2 imagery. In particular, the carbon conversion index and the ratio of the $CO_2$ molecular weight to the C atomic weight, reported in the Intergovernmental Panel on Climate Change (IPCC) guideline, was used to convert the stand biomass into the amount of carbon sequestration. Thereafter, the KOMPSAT-2 imagery was classified with the segment based classification (SBC) method in order to quantify carbon sequestration by tree species. This approach, estimating the amount of carbon sequestration for certain species in stand, can be available to extend plot-based carbon sequestration to stand-based carbon sequestration.