• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.115-115
• /
• 2001

경주시 양남면의 4기 단층으로 추정되는 수렴단층에 의해 절단되는 해안단구 퇴적층 풍화단면에서 저결정질 광물인 앨로패인 교결층을 기재하였다. 이들은 자갈퇴적층 내에 협재하는 수조의 모래층에 한정되어 형성되어 있으며, 3-17 cm 두께로 연장성이 매우 좋다. 편광현미경 관찰에 의하면 모래층에는 사장석편들이 다량 함유되어 있으며 앨로패인은 광학적 등방성의 치밀한 점토집합체들로서 사장석 입자를 선택적으로 교대하거나 자갈과 모래입자들을 피복하고 있다. 앨로패인은 광학적 이방성인 상하위층의 고령토질 점토피복물과 명확히 구분된다. 앨로패인의 전자현미분석에 의하면, Al/Si 원자비가 1.3-1.7 범위이고 평균값은 1.5이다. X선회절분석 결과 3.49$\AA$과 2.26$\AA$에서 두 개의 넓은 회절대가 관찰된다. 주사 및 투과전자현미경관찰에 의하면 앨로패인을 특정한 입자형태 없이 치밀한 겔상태를 이루고 있다. 열분석에 의하면 96$^{\circ}C$에서 큰 흡열피크와 992$^{\circ}C$에서 발열피크가 관찰되며, 총 45% 정도의 중량감소를 보인다. 사장석의 평균조성은 An$_{87}$이며, 사장석내 유리포유물의 전자현미분석결과는 화산암 화학분류도에서 현무암 영역에 도시된다. 이 지역의 기반암은 현무암질 라필리응회암이나 사장석편을 제외하고 벤토나이트화되어 있다. 따라서 해빈환경에서 사장석이 벤토나이트에서 분리되어 퇴적한 것으로 보인다. 앨로패인 교결층은 해수면 강하로 단구퇴적층이 지표로 노출된 후, Al의 함량이 높고 비교적 풍화에 약한 사장석이 선택적으로 풍화되어 생성되었다. 앨로패인으로 피복된 모래층 내의 자갈은 풍화반응이 지체되어 상하위층의 자갈과 비교하여 풍화도에 있어서 현저한 차이를 보인다.. 파이프 중심에서 외곽부로 갈수록 전기석의 함량은 줄어들고 있고 장석들이 알바이트ㆍ칼스베드 쌍정을 보이며, 흑운모가 각섬석보다는 우세하게 나타나고 있다. 전기석은 주상 결정, 자형 내지 반자형의 입자로 다색성을 보이며, 결정 중심에서 가장자리로 갈수록 파란색과 황갈색의 광학적 누대구조를 관찰할 수 있다. 일광광산에서 산출되는 전기석에 대한 현미경 관찰은 열수기원임을 지시하고 있다. 야외조사와 현미경 관찰의 예비조사에 의하면 일광광산의 전기석이 형성된 환경은 다른2가지 화학적인 저장소의 혼합 효과의 결과로 생성되어진 것으로 예상된다. 일광의 화강암류를 만든 마그마는 전기석을 형성할 만큼의 Fe-Mg성분이 충분하지 않았을 것이다. 화강암 내에 흑운모와 각섬석의 결정작용에 의해 마그마의 Fe-Mg성분이 고갈되어지고 이로 인해 그 함량이 감소하며 상대적으로 마그마 내에 남은 붕소(B$_2$O$_3$)는 열수로 용리되고 흑운모, 각섬석과 평형을 유지하며 열수에 남아있게 된다. 잔류용융체에 남은 붕소의 함량은 전기석을 만들기에 충분함에도 불구하고, Fe-Mg 함량이 부족하여 마그마 기원의 전기석 결정을 만들 수가 없다가 광맥이 형성된 시기에 또 다른 열수가 공급되면서 이전의 평형이 깨지고 기존의 흑운모와 같은 염기성 광물이 붕소(B)를 함유한 새로운 열수와 반응하여 전기석을 형성한 것으로 예상한다. 앞으로 전암과 광물에 대해 지화학적 연구를 통해 화강암류와 전기석과의 지화학적 연관성, 주성분 원소와 열수의 특성과의 상관관계, 전기석의 기원(마그마 기원인지 열수기원인지)이 보다 정확하게 파악될 것이다. 마그마 진화에 따른 전기석의 성분변화와 기원을 이용하여 일광광산의 동광화대를 형성한 마그마 계에서 열수계로 이어지는 지질학적 과정을 이해할 수 있을 것이며, 암석 성인론적 지시자로서

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.483-487
• /
• 2001

This study was carried out to investigate the role of attached leaflet on rooting and growth by one nodal cutting in tomato. As cutting sources 4 to 6 nodes could be obtained from one nursery seedling. Medium for cutting was a mixture with perlite plus peat moss (1 : 1, v/v), and each plug capacity was 30mL in the 72 cells-plug tray. Plant height and the number of leaves were significantly increased by attached leaflet cutting in 'Pepe' and 'Coco' cherry tomato. Dry weights of top and root were increased as much as 3 to 15 times in the cutting attached leaflet. Rooting percentage was 93.5% in one node cutting and 86% in the cutting with hypocotyl node part. At 20 to 24 days after nodal cutting, healthy nursery plant could be produced to transplant in field. The nursery plants by nodal cutting (NPNC) showed more fibrous roots and less tap roots than that of seedling. In terms of rooting pattern, NPNC rooted at the whole ground stem part, while rooting of seedling occurred at basal part of hypocotyl.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.325-331
• /
• 2016

Computational fluid numerical analysis using the commercial code CFX was performed to develop a Pelton turbine for a pico hydro power generator using the circulating water of a cooling tower in a large building. The performance of the Pelton turbine was examined for different design factors, such as the bucket shape, in which the Pelton wheel was connected in an appropriate manner to the pipe section, and the number of buckets in order to find the optimal design of Pelton turbine for a pico hydro power using surplus water. A benchmark test was carried out on the manufactured small scale Pelton turbine to validate the design method of the Pelton turbine by numerical analysis. The results obtained by comparing the flow characteristics and power output measured using the ultrasonic flowmeter, the pressure transducer and the oscilloscope with the numerical results confirmed the validity of the analytical design method. The possibility of developing Pelton turbines for kW class pico hydro power generators using surplus water with an average circulation velocity of 1.2 m/s for the chosen bucket shape and number of buckets in a 30 m high building was confirmed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.592-599
• /
• 2002

본 연구에서는 수삼의 가공전 선별을 위해 현장에서 편리하게 사용할 수 있는 초음파 전달 속도 계측 자동화 시스템을 개발하여 그 성능을 평가하고자 하였으며 결과를 요약하면 다음과 같다. 1. 개발된 시스템은 제어용 컴퓨터, 시스템 구동 및 탐촉자 이동 장치, 하중 변환장치, 초음파 발생 및 송수신 장치 등으로 구성되었다. 2. 제어 및 계측용 프로그램은 압축력, 측정 대상물의 크기, 초음파 전달 시간을 순차적으로 계측하여 초음파 전달 속도를 계산하는 알고리즘을 개발하였으며, Visual Basic 6.0으로 작성되었다. 모터의 작동, A/D 변환, RS232C 통신 등과 관련된 부분은 각각의 모듈화된 함수로서 구동하고자 하였다. 3. 개발된 시스템의 속도와 거리별 이동 거리별 오차를 측정한 결과 0∼0.04mm 범위를 나타내었다. 이 값은 시스템의 허용오차인 0.17mm 오차보다는 현저히 작은 값이었고 15mm/s와 30mm/s의 이동 속도에서 모두 비슷한 크기의 오차값을 나타내었다. 4. 개발된 시스템의 속도별 반복정밀도 실험 결과 측정위치에서의 반복에 의한 정지 위치 오차는 전 구간에서 0.02mm 이내로 나타났고, 이동 평판의 이동속도가 15mm/s였을 경우에는 이동 회수 30회, 이동 거리 60mm일 때 최대 편차 0.019mm를 나타냈으며 이동속도가 30mm/s일 경우에는 이동 회수 40회, 이동거리 20mm에서 0.02mm의 최대 편차를 나타내었다. 5. 5개의 알루미늄 조각의 크기를 시스템으로 측정한 결과 측정값의 최대 편차는 0.08mm였다. 이 값은 시스템의 허용오차인 0.17mm의 50% 수준으로 시스템은 대상물의 크기 측정에 적당하다고 사료되었다. 6. 절단된 수삼의 초음파 전달속도는 평균 396.4m/s였다.를 축열재로 사용할 경우 재생기를 반으로 나누어서 가열부 쪽에 철선을, 냉각부 쪽에 철망을 삽입한 것이 반대로 삽입한 것보다 재생기 양단의 온도차는 높게 나타났고, 재생기 양단의 압력 차는 낮게 나타났다. 재생기 축열재로서 철망-철선을 사용할 경우 철선-철망 ø1.2-150이 전열 표면적은 작으나 재생기 양단의 온도차가 가장 큰 것으로 나타났으며 재생기 양단의 압력 차는 가장 낮게 나타나 공시 철망- 철선 혼합 축열재중 가장 우수함을 알 수 있다. 4. 철망사이에 철선을 삽입한 축열재의 경우, 철망사이에 삽입한 철선의 직경이 큰 것이 철선의 직경이 작은 것보다 재생기의 양단의 온도차가 높게 나타났고 재생기 양단의 압력차는 작게 나타났다. 그러므로 철망사이에 철선을 삽입한 것 중 성능이 우수한 것은 150-ø2. 0-150으로 나타났다. 5. 실험한 재생기 축열재들 중에서 성능이 우수한 것들을 비교한 결과, 복합 철선 ø1.2-1 50이 가장 성능이 좋은 것으로 나타났다.적외선.열풍 복합건조방법이 높게 나타나 이것은 곡물 표면에 원적외선 방사에의한 복사열이 전달되어 열장해를 받았기 때문으로 판단되며, 금후 더 연구하여 적정 열풍온도 및 방사체 크기를 구명해야 할 것이다.으로 보여진다 따라서 옻나무 유래 F는 포유동물의 생식기능에 중요하게 작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.54-61
• /
• 2000

Amalgam, though a widely used dental material, does not bond to the tooth substrate Therefore, retentive preparation of the cavity is necessary. Such amalgam restorations, until corrosion products form and plug the margin, will show significant marginal leakage. Unless this is prevented early on, saliva and bacteria may enter the cavity causing postoperative hypersensitivity, dissolution and collapse of the restoration, discoloration of the margin and secondary caries, leading to shortened life-span of the restoration and pulpal pathosis. Recently, a method of restoration has been introduced whereby tooth material can be preserved, cavity margin can be sealed and preventive treatment of pit and fissure can be administered while retaining all the advantages of conventional amalgam restorations. Such sealed amalgams involve removing the carious lesion without extending the cavity for prevention and using pit and fissure sealants to seal cavity margins and pit and fissures to reduce microleakage. In this study, finishing of the amalgam and sealant application were performed after different intervals following of amalgam restoration to compare the microleakage of sealed and conventional amalgam restorations. Thirty bicuspids were prepared with Class V cavity preparations on the buccal and lingual surfaces. After amalgam placement, they were divided into the following groups and treated accordingly. Group 1 : Polishing after 24 hours Group 2 : Immediate sealant application without polishing Group 3 : No polishing, but sealant applied after thermocycling 500 times After treatment, the samples were thermocycled 500 times between $5^{\circ}C$ and $55^{\circ}C$ with a dwell time of 30 seconds. After thermocycling, the samples were dipped into 1% methylene blue kept in a $37^{\circ}C$ incubator at 100% humidity for 24 hours. The teeth were then embedded in resin and cut bucco-lingually along the tooth axis and observed with a stereomicroscope to determine the degree of microleakage, The following results were obtained : 1. Group 2 showed the least microleakeage, while group 1 showed the greatest. 2. Group 1 showed significantly greater microleakage compared to group 2 (p<0.05). However, no significant differences were found between group 1 and 3(p>0.05). No significant differences in microleakage were also found between cup 2 and 3(p<0.05).

• Korean Journal of Food Science and Technology
• /
• v.33 no.5
• /
• pp.641-644
• /
• 2001

This study was performed for development of new analytical method of monascus pigments in foods. In this method, analysis of monascus pigment in foods has been carried out by detection of monascin and ankaflavin of the main color component of monascus pigment as indicator compounds. Monascin and ankaflavin were isolated and identified by TLC, HPLC, Prep. HPLC, $^{1}H-NMR$ and Mass spectrophotometer. The analysis of monascin and ankaflavin in foods such as massal, sausage, mixed press ham, mixed fish sausage, semi-dried sausage and syrup was performed by using reverse phase high performance liquid chromatograph with Capcell Pak C18 column at wave length 390 nm. The quantitative results of monascin were as follows : $0.01{\sim}3.31\;{\mu}g/g$ item in massal, $0.05{\sim}0.10\;{\mu}g/g$ in mixed fish sausage, and $0.34{\sim}0.35\;{\mu}g/g$ in semi-dried sausage. But the quantitative results of ankaflavin were as follows: $0.02{\sim}0.89\;{\mu}g/g$ in massal, ankaflavin were not founded in other samples.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.5
• /
• pp.293-303
• /
• 2004

This experiment was conducted to investigate the direction or orientation of clay particle movement in argillic horizons (Bt) for clarifying the soil classification of soils. Soil samples were collected from 22 soil series containing Bt horizons. Physical and chemical characteristics and mineral and chemical compositions of clay in the soils were analyzed. Micoromorphological characteristics of the Bt horizons were also investigated with thin sections of the natural undisturbed and oriented soil samples. Average clay content in the Bt horizons was 28% and 1.33 times higher comparing to that in the surface layer. Soil pH was higher, but cation exchange capacity (CEC) and organic matter content were lower in Bt horizon than those in the surface layer. There was an evidence of clay accumulation in Bt horizons of all soil series examined except Bangog series. Although there was an increase of clay content in the horizons in Bangog series, the clay was not originated from illuviation process. The translocation of clay was in the order of an 2:1 expandable clay minerals > 2:1 non-expandable clay minerals > 1:1 clay minerals. The illuvial substances in argillic horizon were composed with clay, amorphous iron and opaque mineral. The micoromorphological features of Bt horizon were void coating, channel infilling and grain coating. There was an apparent boundary between clay coating and the groundmass in residuum and colluvium, but Bt horizon of alluvium was composed of a skew plane amputated by the physical operation.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.5
• /
• pp.421-433
• /
• 2010

The most typical deterioration of steel structures is corrosion damage. However, a method to evaluate residual load-carrying capacity of corroded steel structures is not yet established. It is difficult to check current serviceability and safety of the structures. In this study, compressive tests and finite element analyses were conducted on H-beams with corroded web. Then, the effect of corrosion damage on web crippling strength and evaluation methods of the web crippling strength are studied. Based on the tests, 4 H-beam specimens used in a subway construction site and 9 H-beam specimens with different web-thickness and damaged-height underwent compression-tests. To consider loading and supporting areas in the site, compressive loading was applied in the entire region of the upper and bottom flange in 5 H-beam specimens and applied partially on the regions of the upper and bottom flange in 8 specimens. The finite element analysis of 38 parametric model specimens simulating different corrosion damages was also carried out. From experimental and analytical results, the relationships between corrosion damages in the web and residual web crippling strength are presented. Factors web crippling strength was reduced are formulated by using residual average thickness and the standard deviation of the corroded web thickness. Also, a simple evaluation method of residual web crippling strength was proposed.

• Journal of Chest Surgery
• /
• v.35 no.4
• /
• pp.283-289
• /
• 2002

Backgrouds: It is almost universally accepted that occlusive vascular diseases are best managed by anatomical reconstruction. However, the mortality and the morbidity have limited this operation for patients with high operation risks. In these patients, palliative operations such as extra-anatomic bypass and lumbar sympathectomy, are accepted as useful treatment. Material and Method: A retrospective study was conducted in 38 patients who underwent palliative operations for occlusive vascular disease at Korea University Guro Hospital between 1996 and 2000. Mean age of the patients was 60.37 $\pm$ 17.65 years, and preoperative diagnoses were atherosclerosis in 32 patients, Buerger's disease in 4 patients, Raynaud's syndrome in 1 patient and SVC syndrome in 1 patient. Result: Extra-anatomic bypass(40procedures), lumbar sympathectomy(17), thromboembolectomy(7) and femoral artery graft interposition(1) were performed. Six patients were required reoperation due to graft flow failure or fistula. Three year primary patency rate of entire operations was 78.29 $\pm$ 8.81%, and the correlation between type of operation and patency rate was not statistically significant. Conclusion: Palliative operations for occlusive vascular disease are useful treatment in limited patients with high operation risks or limited life expectancy.

• Parasites, Hosts and Diseases
• /
• v.35 no.2
• /
• pp.119-126
• /
• 1997

Acanthnmoebn sp. YM-4 is simitar to A. culbertsoni based upon morphological characteristics of trophozoites and cysts. However, based on other characteristics, pathogenicity to mice, in uitro cytotoxicity and isoenzyme patterns, Acanthomoebo sp. YM- 4 was quite different from A. culbertsoni. Restriction fragment length polymorphism (RFLP) analysis of mtDNA is useful in the classification of members belonging to the genus Acanthcmoebn. Therefore, in this study, RFLP analysis of Acnnthcmoeba mtDNAs was accomplished using five restriction enzymes: Hnelll, Hinull, Clcl, Pudl and ScE. Each restriction enzyme produced approximately 3-15 fragments (range: from 0:6 kip to 34.4 kbp) . The mtDNA genome size, calculated by the summation of restriction fragments, averaged 46.4 kbp in Acnnthamoeba sp. YM-4,48.3 kbp in A. culbertsoni and 48.8 kbp in A. polyphaic, respectively. Digested mtDNA fragments of Accnthcmoeba sp. YM-4 contained nine and seven same size fragments, respectively, from a total of 67 and 69 fragments observed in A. culbertsoni and A. polyphcgn. An estimate of the genetic divergence was 10.1% between Acanthamoebc sp. YM-4 and A. culbertsoni, and 9.9% between Acanthamoebn sp. YM-4 and A. polyphcga.