• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.339-339
• /
• 2020

도시화로 인한 불투수면적의 증가와 기후 변화로 인한 강우패턴의 변화 자연적 물순환 체계에 악영향을 미치며. 이를 해결하기 위하여 국내에서는 도시 내 빗물관리 및 비점오염원 저감이 가능한 저영향개발(Low Impact Development, LID)를 적용하고 있다. 건기시 도로, 주차장등 차량통행 및 유동인구가 많은 지역에서는 입자상 물질들이 많이 발생되어 노면에 축적되어 있다가 강우시 강우유출수를 통해 시설로 유입된다. 이로 인해 시설 내 오염물질 및 퇴적물이 축적되어 여재 공극막힘현상 및 침투율저하의 문제가 발생되어 시설 내 효율이 감소된다. 따라서, 레인가든의 장기 모니터링을 통해 시설 내 유입되는 오염물질의 성상 분석 및 시설 내부의 퇴적물 분석을 통해 LID시설 운영의 효율성 평가를 수행하였다. 모니터링은 강우시 모니터링과 건기시 집수구역, 침강지, 시설 상부, 중부, 하부 등 총 5곳에서 채취하여 분석을 수행하였다. 모니터링은 평균 선행건기 일수는 5.46±4.7 days, 평균 강우량은 14.31±11.4 mm, 평균 강우강도는 5.33±6.7 mm/hr의 강우사상에서 모니터링을 수행하였다. 시설 내 평균 유입수농도는 TSS 98.0 ± 32.7 mg / L, COD 133.6 ± 6.3 mg / L, TN 5.77 ± 4.05 mg, TP 0.54 ± 0.03 mg / L으로 분석되었다. 유입부 내 퇴적물 종류는 Sandy Clay Loam으로 나타났으며, Cr 0.36mg / kg, Cu 5.17 mg / kg and Pb 6.04 mg / kg으로 중금속의 함유량이 높은것으로 분석되었다. 퇴적물은 침강지 및 시설 유입부에서의 입자크기는 49-113㎛ 약 60%의 퇴적물이 축적되어 제거되는 것으로 나타났다. 시설 내 침강지에서 50㎛ 이상의 입자들이 여과, 흡착 및 침전으로 인하여 40% 이상의 입자들이 제거되는 것으로 분석되었으며, 50㎛ 미만의 입자들은 시설 내 중간부, 유출부에서 제거되는 것으로 분석되었다. 침강지에서 유입수 대부분의 입자상물질들이 흡착 및 여과로 인한 제거가 이루어지기에 침강지 여재부는 넓은 표면적, 우수한 흡착능 및 여과율을 고려하여 선정하영 하며, 잦은 교체를 위하여 중량성이 낮은 우드칩 등이 적당한 것으로 사료된다.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.460-467
• /
• 2001

Inverse suspension polymerization of acrylamide (AM) in cyclohexane was carried out to study the effects of concentrations of sorbitan ester (Span) stabilizers and 2,2'-azobis (2-methyl propionamidine) dihydrochloride (AIBA) initiator, amount of monomer, shaking speed, and polymerization temperature on the particle size of the resulting poly (acrylamide) (PAM) beads and their molecular weights. It was found that the particle diameter. in general, decreased with increasing concentration of stabilizer, shaking speed, and water content in the aqueous phase, and with decreasing concentration of initiator and polymerization temperature. The average molecular weight of the resulting PAM beads was also found to increase with increasing concentrations of monomer and stabilizer, and also with decreasing concentration of initiator, polymerization temperature, and water content in the aqueous phase. In this study, PAM beads ranging 2 ~ 50 ${\mu}$m in diameter, with 8000000 ~ 12000000 in the weight average molecular weight were successfully prepared in almost 100% conversion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1642-1647
• /
• 2009

Changes in aerosol characteristics during 2006 ${\sim}$2008 Asian dust events in Cheoan were investigated by measuring mass, ion and elemental concentrations of fine and coarse particles. The average mass concentrations of daily TSP, PM10, PM2.5 were 214.9, 160.3, and 95.9${\mu}\;g/m^3$during Asian dust events, which were 3.08, 2.58, and 1.95 times higher than Non-asian dust events. The maximum concentrations of TSP, PM10, and PM2.5 were 850.1, 534.4, and 233.3${\mu}\;g/m^3$, which were 12.19, 8.60, and 4.76 times higher, respectively. Increases in ion concentrations were not significant during Asian dust events, but elemental concentrations including soil components such as Fe, Al, Ti increased by 17.1 and 43.4 times for fine and coarse particles, respectively. The results clearly indicate that metallic components from soil constituents were the major components in Asian dusts sampled at Cheonan.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.629-637
• /
• 2000

Dispersion polymerization of acrylamide in the media of t-butyl alcoho1/$H_2O$ mixtures at 30~5$0^{\circ}C$ in the presence of hydroxypropyl cellulose and ammonium persulfate as steric stabilizer and initiator, respectively, was carried out. It was studied the effects of concentrations of initiator and steric stabilizer, amount of monomer, polymerization temperature, t-butyl alcohol/$H_2O$ ratio, concentration of crosslinker, purification of monomer and nitrogen purge on the particle size of the resulting acrylamide latices and molecular weight of the latex-poly(acrylamide). In this study, poly(acrylamide) latices of 0.1~0.5 ${\mu}{\textrm}{m}$ with 470000~2080000 in (equation omitted) were prepared and the resulting PAM latices were all dissolved in water in stantly.

• KSBB Journal
• /
• v.18 no.5
• /
• pp.385-392
• /
• 2003

Biodegradable poly (L-lactide) (L-PLA) solution in methylene chloride was precipitated into microparticles by using supercritical carbon dioxide modified with polar cosolvents. The effects of the amount of polar cosolvents, solution concentration, temperature, and solution flow rate on the formation of microparticles were investigated. The mean particle size was found to increase with the increase of solution concentration and flow rate. It was also observed that the particle size not only increases but the size distribution also becomes less uniform as the temperature increases. The percent recovery of microparticles was found to be 30∼40% at all experimental conditions. The supercritical carbon dioxide modified with methanol and ethanol was employed to enhance the recovery, resulting in significant improvement up to about 80 and 70%, for methanol and ethanol, respectively. Furthermore, the mean diameter of L-PLA microparticles was found to be less than 1 $\mu\textrm{m}$ for both cosolvents.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.493-501
• /
• 2003

Poly(methyl methacrylate) (PMMA) particles, denture base resin, were synthesized by suspension polymerization through control of polymerization conditions (stabilizer concentration, co-monomer concentration, and the agitation speed) and evaluated changes in molecular weight and particle size. We also investigated their mechanical properties of compression-molded samples which were from synthesized polymer powder mixed with methyl methacrylate (MMA) solution. under the condition of volumetric ratio as 2:1(PMMA powder and MMA solution). The results shows that the mechanical properties were mainly affected by particle size over 100 ${\mu}$m (in particle size) and by molecular weight under 100 ${\mu}$m (in particle size). From these results, we concluded that the most appropriate particle size of PMMA powder for heat-cured denture base resins is around 100 ${\mu}$m. and its molecular weight is around 300000 (M$\sub$n/).

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.758-762
• /
• 1998

In preparing void latex particles by emulsion polymerization, the weight mean particle size of which is ranged $0.3{\mu}m{\sim}1.5{\mu}m$, reaction parameters were investigated in order to elucidate their effects on the size distribution and the solid content of emulsion polymer. Experimental results showed that the weight mean particle size of hydrophillic core polymer was reduced as the concentration of sodium dodecylbenzene sulfonate (SDS) increased. The size of void polymethyl-methacrylate-polystyrene composite latex particles became larger as the concentration of styrene monomer and the sodium persulfate increased. However, the size of void latex particles was reduced as the feeding rate of acrylic acid increased. The solid content of emulsion polymer was strongly dependent on the addition of stylene monomer. By increasing the concentration of styrene monomer the solid content of emulsion polymer increased linearly.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.59-67
• /
• 1995

This study was conducted to develope the automatic insulation system which control inside temperature of the greenhouse. For this purpose, the double- wall greenhouse and system which could automatically supply and discharge styrene pellets were constructed and abrasion of the pellets, blower ability, insulating property, transmittance and shading effect were analyzed by the experiments. The results obtained from this study can be summarized as follows : 1. It took an hour and fifteen minutes to supply and discharge about 2㎥ pellets in the experimental greenhouse. However, it is possible to reduce the operation time by proper selection of the blower and exhaust port, and by proper control of the supply and return pipe. 2. It was founded that the indirect delivery way was more profitable than the direct one in the supply and return of pellets. 3. When the transmittance was measured between 10 a.m. and 3 p.m., the average light transmissivity rate was 67%. 4. In winter nighttime, the inside temperature of the double- wall greenhouse with out the pellets was higher than the outside temperature by 3.4$^{\circ}C$ on an average. However, the inside temperature of the double - wall greenhouse with insulated area 73% was higher than the outside by one 6.6$^{\circ}C$ on an average, and the inside temperature of the greenhouse with insulated area 100% was higher than outside one by 13.5$^{\circ}C$ on an average. Therefore, it was proved that the insulating ability of the double - wall greenhouse in nighttime was excellent. 5. When the outside temperature was 36.9$^{\circ}C$ on an average, the inside temperature of the double- wail greenhouse with insulated area 100% was 3$0^{\circ}C$ on an average. As the inside temperature was lower than the outside one by 7$^{\circ}C$ on an average, we could know that the shading effects of the double- wall greenhouse were excellent in summer daytime.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.625-625
• /
• 2013

본 연구에서는 전자빔 조사를 이용하여 대기조건에서 중공 실리카 나노입자의 새로운 기체상 단일 공정 제조 방법을 제시하였다. 실험에서는 전구체로서 TEOS와 은 나노입자가 사용되었다. EDS 분석 결과 실리카 중공 나노입자의 제조를 확인하였으며, TEM 분석을 통해 제조된 중공나노입자의 평균 지름과 쉘 두께가 각각 56 nm와 10 nm임을 알 수 있었다.

• The Korean Journal of Quaternary Research
• /
• v.5 no.1
• /
• pp.47-61
• /
• 1991

Textural analysis of gravels of raised beach (old beach) in the Weaver Peninsula, King George Island, Antarctica has been carried out as a first part study among 20 other sites surveyed in the Weaver Peninsula and Barton Peninsula, King George Island. The raised beach described as WP-5 in this paper is 3.95 m higher than the present beach in elevation. And it is described as old beach. The beach shows typical subenvironment, that is, beach berm and beach face. Mean size, mean roundness and mean sphericity of gravels from beach berm are -4.10ø, 0.44 and 0.66 respectively. However, mean size, mean roundness and mean sphericity from beach face are -4.23ø, 0.41 and 0.67 respectively. In particular, it seems to be worthy to note the differences of textural parameters between Antarctic glacio-marine beach gravels and temperate and normal marine beach gravels. Under such conception the present study wishes to show only textural parameters, i.e., size, roundness, sphericity and shape obtained from the analysis of Antarctic glacio-marine beach gravels.