• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.191-196
• /
• 1999

Effects of agitation and heating rate on crystallinity, size distribution and mean size of $\alpha$-$SiO_2$powder prepared hydrothermally were investigated. $\alpha$-$SiO_2$crystalline powder, in mean particle size of 1~3.2 $\mu\textrm{m}$, was obtained at $350^{\circ}C$ using KOH as a mineralized for a 3 h reaction. Experimental results showed that particle size became smaller as the rate of agitation increased if it was introduced from the beginning of reaction, however, crystallinity was reduced at the low rate of agitation and it was became enhanced at above 150 r/min. Particle size became larger if agitation was introduced at any time during the reaction rather than introduced from the beginning of reaction. It was also found that particle size became smaller if heating rate was reduced, while the rate of agitation kept constant.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.26-26
• /
• 2020

하천수의 수심을 유지하기 위하여 설치된 콘크리트 취수보 대신 강자갈이나 쇄석을 채움재로 하는 돌망태를 사용하게 되면 토사퇴적으로 인한 건천화나 상, 하류 수생태계 단절과 같은 문제를 어느 정도 감소시킬 수 있을 뿐만 아니라, 자갈접촉산화작용에 의한 수질개선과 공사비 절감 효과 등의 장점이 있다. 그러나 돌망태는 투수성이므로 불투수성인 콘크리트 보다 저류측면에서 불리하다. 콘크리트 취수보에서의 흐름은 보 정점의 형상, 보의 폭, 높이, 그리고 월류수심에 좌우되며, 베르누이 방정식과 연속방정식에 의해 방류량 산정식을 유도하고, 유량계수와 같은 실험상수를 결정하여 방류량을 계산한다. 돌망태 취수보의 흐름은 보의 높이, 보의 길이, 보의 상류수심 외에 채움재의 형상, 입경, 배치상태가 흐름에 영향을 미친다. 따라서 콘크리트 취수보에 적용되었던 기존의 방류량 산정식을 그대로 적용할 수 없다. 돌망태 보의 통과류는 실험상수가 포함된 비선형 수두손실방정식으로 표현할 수 있다. 실험상수는 비표면적의 크기를 의미하는 채움재의 평균동수반경와 관계되며, 평균동수반경은 채움재 입자의 형상으로 부터 구할 수 있다. 따라서 실험을 통하여 채움재 입자의 형상과 크기에 따른 실험상수와 평균동수반경의 관계를 구하면 비선형 수두손실방정식으로부터 통과류의 방류량을 계산할 수 있게 된다. 본 연구는 돌망태 취수보가 대수층함양 원수 공급시설물로서 타당한가를 평가하기 위하여 수행되었다. 콘크리트 취수보의 월류량 계산은 기존의 방류량 산정식을 이용하였으며, 돌망태 취수보는 실험상수와 평균동수반경의 기존관계식을 이용하여 통과류의 방류량을 계산하였다. 이와 같이 계산된 각각의 수심-방류량 관계로 부터 수심을 비교하였다. 동일한 유량조건에서 돌망태 취수보의 상류수심은 콘크리트 취수보보다 작게 계산되었다. 상류수심은 돌망태 채움재 입자의 크기가 작을수록 증가하여, 돌망태 취수보는 채움재의 입자크기가 작을수록 저류성능이 개선됨을 알 수 있었다. 따라서 돌망태 취수보는 채움재의 입경이 작을수록 콘크리트 취수보의 저류수준에 접근할 수 있을 것으로 판단되었다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.11a
• /
• pp.519-520
• /
• 2006

계면활성제의 종류로 OA-n계열에서 분자량이 낮은 OA 300이 가장 우수한 세척력을 보였고 계면활성제의 함량은 3 wt.%일 때 가장 좋았다. 이는 평균입경이 작고 접촉각이 낮은 것으로 분석되어지며 세척력은 우수하지만 저장안정성은 떨어졌다. 그러나 OA 600의 경우 세척력은 떨어지나 저장안정성이 우수하여 이를 혼합한 계면활성제를 사용하여 저장안정성을 높였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.1
• /
• pp.177-186
• /
• 1996

A convolution alogorithm combined with Fourier transformation is applied to the tomographic reconstruction of the asymmetric spray structure to identify the local drop size and volume concentration. The line of sight intergrated data from Malvern particle analyzer with multiangular scanning form a basic information for the deconvolution. Linear interpolation is tested to obtain the effect of increasing number of scanning angles. This transformation method predicts well the structure of asymmetric spray. The tehnique can be extended to other line of sight combustion diagnostics.

• Electrical & Electronic Materials
• /
• v.3 no.4
• /
• pp.295-305
• /
• 1990

여러가스에 대한 저항변화를 측정하기 위해 초미립 분말을 사용하여 pellet형 SnO$_{2}$ 가스센서를 제조하였다. 초미립 분말은 화학기상반응법으로 만들어졌으며 평균입경은 0.08.mu.m이었다. 냉간 성형된 소자는 사용전 공기중에서 700~850.deg.C에서 10~60분간 소성되었다. 측정된 결과는 분말의 소결성 및 열린 기공도로 설명될 수 있었다.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.5-14
• /
• 2013

Coarse granular geomaterials containing large gravels are broadly used for construction of large geotechnical systems such as dams, levees, railways and backfills. It is necessary to evaluate deformation characteristics of these materials for dynamic analysis, e.g. seismic design. This study presents evaluation of dynamic deformation characteristics of coarse materials using large scale resonant column testing apparatus, which uses specimens with 200 mm in diameter and 400 mm in height, and the effects of gradation characteristics on maximum shear modulus, shear modulus reduction curve and damping characteristics were investigated. From experimental study using rock-fill materials for a dam, we could see that the largest or mean particle size affects the shape of shear modulus reduction curve. When the specimens are prepared under the same conditions for maximum particle size, the coefficient of uniformity affects the confining stress exponent of maximum shear modulus. It could be concluded that the maximum particle size is an factor which affects shear modulus reduction curve, and that the coefficient of uniformity is for small strain shear modulus, especially for the sensitivity to confining stress.

• Korean Journal of Food Science and Technology
• /
• v.6 no.1
• /
• pp.30-35
• /
• 1974

As studies on the starch properties of barley and naked barley, the granule size frequency distribution, amylose content and blue value of starches seperated from the 11 varieties of barley and 13 varieties of naked barley, which were grown paddies of Office of Rural Development, Iri, Korea in 1972, were determined. The results were as follows: 1. The type of the barley and naked barley starch granules was short oval and the ratio of minor axis to major axis was 1 to 1.2. Diameter of the starch granules was in the range of $4.0{\sim}6.0\;{\mu}$ to $32.0{\sim}37.0\;{\mu}$ is and medium granule of the naked barley was $10{\sim}22\;{\mu}$ on the contrary to $16{\sim}20\;{\mu}$ of the barley starch. Average size of the naked barley starch was larger than that of the barley and some differences were observed between varieties. 2, Amylose contents of the barley and the naked barley starches were in the range $27.5{\sim}30.5%$ and average of the barley was 29.4% a little higher than 28.2% of the naked barley and observed of some differences between varieties. 3. Blue values of the barley and the naked barley starches were in the range $0.47{\sim}0.54$, and average was 0.51.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.12
• /
• pp.1111-1118
• /
• 2010

Combustion measurements based on optical techniques have recently become of major interest as tools not only for clarifying the combustion mechanism but also for validating the computational results for the combustion fields. In this study, the particle behavior in turbulent pulverized coal flame are investigated using advanced optical diagnostics. A laboratory-scale pulverized coal combustion burner is specially fabricated as open type in order to apply various optical measurement techniques. The detailed particle behavior is performed by LDV (laser Doppler velocimetry) and SDPA (shadow Doppler particle analyzer). It is observed that the particle mean diameter increase as the distance from burner increases, and this is found to be caused by the decrease of small particles' diameter and increase of large particles' diameter. This is because of result in the char reaction and the particle swelling due to devolatilization, respectively. The size-classified streamwise velocities of pulverized coal particles in the central region of the jet show the same magnitude, whereas those in the outer region are different depending on the particle size. The results show that the velocity and size-classified diameter of the pulverized coal particles in the flame can be measured well by SDPA.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.842-845
• /
• 2002

Physicochemical properties and water uptake rate of pigmented rice were determined. The median and mean particle sizes of pigmented rice flour were 15.18 and $38.53\;{\mu}m$, whereas brown rice flour were 11.46 and $33.41\;{\mu}m$, respectively. Water-binding capacity, swelling power, and solubility of pigmented rice flour were higher than those of brown rice flour. X-ray diffraction patterns showed traditional A type of cereals. Moisture gain of pigmented rice kernels increased continuously up to 60 min at soaking temperature $(20{\sim}25^{\circ}C)$. Water uptake rate constants of pigmented rice during soaking at $20{\sim}25^{\circ}C$ also increased.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.441-444
• /
• 2008

Ultra high performance concrete (UHPC) in this study is composed of sand, cement, silica fume, siliceous powder, superplasticizer and steel fiber. UHPC is composed of fine mineral particles below 0.5mm in diameter. In general, siliceous powder improves the mechanical properties of concrete by physical and chemical effect. Physical effect is related with filling interior voids which weaken the mechanical properties and chemical effect with reaction of $SiO_2$ with cement hydrates in a condition of high temperature and pressure. We evaluated the effect of siliceous powder's particle size on the mechanical properties of ultra high performance concrete in air pressure and $90^{\circ}C$ steam curing condition. siliceous powder's particle size in this study is in the range of $2{\mu}m$ to $26{\mu}m$. Fluidity in a fresh concrete, compressive strength, ultimate strain, elastic modulus and flexural strength in a hardened concrete was evaluated. We could find out that the smaller siliceous powder's particle size is, the better the fluidity and strength properties.