• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.11a
• /
• pp.50-55
• /
• 1995

향상되어진 93-PCGC-2는 기존의 PCGC-2와 같이 미분탄 연소를 포함하는 다양한 반응성흐름과 비반응성 흐름을 설명하기 위해 2차원 정상상태 모델로 제시되어 졌다. 93-PCGC-2는 실린더형의 축 대칭계에 응용되어질 수 있고, 난류(Turbulence)는 유체역학식과 연소기구 양쪽을 위해 고려되어졌으며, 불연속 세로좌표 방법(Discrete Ordinates Method)을 이용하여 기체, 벽 및 입자들로부터의 복사열(Radiation)을 모사하였다. 입자상은 입자 무리들의 평균 경로들을 따라 해석하는 Lagrangian계의 해석법으로 모델화되어졌다. 석탄의 팽윤(Swelling)과 촤의 반응성에 관한 부모델과 더불어 새롭게 일반화된 석탄 탈휘발화 부모델 (FG-DVC)도 첨가되어졌다. 비균일 반응기구는 확산과 화학반응 둘 모두를 고려하였다. 주요 기상반응은 국부 순간 평형을 가정하여 모델화하였다. 그래서 반응속도는 혼합의 난류속도에 의해 제한되어진다. Thermal NOx과 Fuel NOx의 유한속도 화학론(Finite Rate Chemstry)에 대한 부모델은 화학반응속도론와 난류성의 통계치를 통합하여 만들어져 있다. 기상은 반복적인 line-by-line기교에 의해 풀려지는 elliptic partial differential equation으로 묘사되어진다. 수치적인 안정을 고려하기 위해 under-relaxation이 이용되어졌다. 이렇게 코드화된 93-PCGC-2는 연소를 위해 모사되어졌다. 또한 더 나아가 이 수치모델의 활용범위는 미분탄의 가스화에도 활용되어질 것으로 기대되어진다.

• The Journal of Engineering Geology
• /
• v.4 no.3
• /
• pp.269-281
• /
• 1994

Microscopic study and X-ray diffraction analysis were carried out to find out rock type, tock forming minerals; and weathering characteristics of rocks at the constructing site of the churyong Tunnel, Kyongju-Gun, Kyongbuk. Seismic velocity and compressional strength were measured to evaluate mechanical properties of rock. The rock of the study area is Jurassic tuff consisting of clay minerals, crystals of quartz and feldspar, fragments of volcanic rocks and shale. Fresh tuff has compressional strength of about $443kg/\textrm{cm}^2$ and seismic velocity of about 3680m/sec in average. It is classified as soft rock. Rock fragment within tuff is andesite and it has compressional strength of about $2500kg/\textrm{cm}^2$ and seismic velocity of about 4340m/sec in average. It is classified as hard rock. A good linear relationship is found between compressional streangth and seismic velocity in both laboratory sample and in-situ rocks. Laboratory samples has seismic velocities faster about 1.5km/sec than those in-situ rocks. It is interpreted that joints, fractures, and water content in the in-situ rocks result in decreas of seismic velocity. As Tuff has more than 50% of clay minerals in matrix and shale fragments, it absorbs water easily in atmospheric condition. Therefore, though the rock in the study area is medium hard rock before weathering, it is weathered very easily in the case of exposure to natural environment, comparing with other rock.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6C
• /
• pp.275-284
• /
• 2012

The Antarctic continent exposed to strong wind, very low temperature, and extremely dry condition. The freezing-thawing cycles under this extreme environment change the mechanical characteristics of rocks near the ground surface. To investigate the effect of freezing-thawing cycles under the extreme environment understand on geotechnical properties of rocks, rocks from the Antarctica were collected from two places: (1) West Antarctic Cape Burks and (2) East Antarctic Terra Nova Bay areas. The rock characteristics of these two areas were described and compared. For Terra Nova Bay area, rock characteristics of rocks near the surface and depths exceeding 2.9 m were examined. The 'near-the-surface rocks' averages of absorption rate, P-wave velocity, and unconfined compressive strength were 0.56%, 3,717 m/s, and 109MPa, respectively; while, those values of 'deep-sited rocks' were 0.24%, 4,670 m/s, and 88MPa. From the measurements, it was found that the effects of weathering were not significant on mechanical characteristics (strength) but were pronounced on physical characteristics(absorption and P-wave velocity).

• Water for future
• /
• v.28 no.5
• /
• pp.219-233
• /
• 1995

A non-stationary multivariate model is selected in which the mean and variance of rainfall are not temporally or spatially constant. And the rainfall prediction system is constructed which uses the recursive estimation algorithm, Kalman filter, to estimate system states and parameters of rainfall model simulataneously. The on-line, real-time, multivariate short-term, rainfall prediction for multi-stations and lead-times is carried out through the estimation of non-stationary mean and variance by the storm counter method, the normalized residual covariance and rainfall speed. The results of rainfall prediction system model agree with those generated by non-stationary multivariate model. The longer the lead time is, the larger the root mean square error becomes and the further the model efficiency decreases form 1. Thus, the accuracy of the rainfall prediction decreases as the lead time gets longer. Also it shows that the mean obtained by storm counter method constitutes the most significant part of the rainfall structure.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11a
• /
• pp.585-588
• /
• 2002

정보검색의 정확률을 높이는 것이 최근 정보검색 연구의 추세이며, 정확률을 높일 수 있는 방법 중 하나로 명사구단위 색인이 있다. 명사구 색인을 하는 방법에는 구문분석기를 이용하는 방법과 패턴 규칙을 이용하는 방법으로 나눌 수 있다. 구문분석기를 이용하여 전체 문장을 분석한 후 명사구단위 색인을 할 경우, 범용적으로 이용할 수 있지만 속도와 정확도가 떨어진다는 문제점이 있으며 패턴 규칙을 이용하는 경우는 속도는 빠르지만 정확도 및 확장성에 문제를 가지고 있다. 이런 문제들을 해결하기 위해 본 논문에서는 문장으로부터 명사구를 분할한 후, 분할된 명사구를 완전 구문 분석하여 색인하는 방법을 제안한다. 명사구는 속격어구와 관형형 명사구를 대상으로 하였고, 구 분할은 속격조사와 관형형어미를 중심으로 주변 형태소와 품사를 고려하는 규칙을 만들어 실행하였다. 실험대상은 짧은 문장, 중간문장, 긴 문장을 각각 25 개를 선정하여 실험하였고, 구 분할을 이용할 경우 평균 재현율은 86%, 평균 정확률은 74% 정도의 성능을 보였다. 긴 문장의 경우, 구 분할을 이용하지 않는 경우에 비해서 정확도 및 속도에서 월등한 성능향상이 있었다.

• Journal of Korea Water Resources Association
• /
• v.44 no.6
• /
• pp.449-459
• /
• 2011

By examining the experimental results, the critical mean velocity which initiates the movement of riprap is increased with the riprap size in mean diameter, the mean diameter over water depth (d/h), Froude number (Fr), and turbulent shear velocity over critical mean velocity (u*/${\nu}$) which have great correlations among them so these parameters are adopted governing hydraulic stability for riprap. The hydraulic stability equation for riprap is developed by regression analysis. The developed equation is expanded from 0.36~0.73 m/s of experimental range to 0~5.0 m/s for the application in engineering discipline. So many useful relations among those parameters including critical mean velocity are derived by expanding to high Reynolds regions. Mean diameter calculation results by expanding to high Reynolds regions coincide with the calculations of ASCE and USBR at the range of 0~3.0 m/s and the calculation result of ASCE at the range of 3.0~5.0 m/s. The results by developed formulae coincide well with the formulae of ASCE in general and also the results by recently developed existing formulae of hydraulic stability for riprap. Thus, the developed equation has the high applicability in engineering discipline to evaluate the hydraulic stability for riprap.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.1
• /
• pp.31-37
• /
• 1993

It is important to improve the germination of grass seeds because they are poor germination under water stress. This experiment was conducted to investigate the response of seeds pre-treated individually with Polyethylene glycol 6000 (PEG) and growth regulators(GA$_3$, Kinetin, NAA) on the germination characteristics when two levels of osmotic potential (0, -5 bar) were put to seeds of Orchardgrass. In the untreated seeds, the total germination rate was decreased under water stress, and the mean germination time was delayed. Priming of Orchardgrass seeds using PEG or GA$_3$ resulted in improved germination under water stress(-5 bar), whereas the opposite was true of kinetin or NAA. The response of seeds primed in solutions of either -15 bar PEG or 100 ppm GA$_3$ was particulary marked compared with the untreated seeds. It is suggested that PEG and GA$_3$ may have positive regulatory effects in triggering the system for water stress alleviation. But the inhibitory effect of the water stress was not completely removed by allowing the seeds to pre-treat in solution of PEG or GA$_3$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.422-429
• /
• 2018

To make students recognize the danger of fire smoke that may occur in ships and to improve the response capability, spaces for safety educ ation were built inside the training ship, and scenarios were developed. This study is an analysis of the movement characteristics of the students acquire d under each scenario. Followings are the summary of the analysis results. In the non-smoke environments, there was no difference in the velocity of escape movement between the case of without block on the familiar route and the case of with unexpected block. However, when the indoor was filled with smoke, the visibility became very low because of the smoke density and the average velocity was 62.5 % slower than the case where it was not. Regardless of the scenarios, the average equivalent velocity on the complex path was faster than the simple straight path, and the standard deviation was smaller. Under the smoke-fullfilled environment, although the relative velocity probability distributions of the complex passage and the entire passag e are very similar, the inter-individual fluctuation of the relative velocity ratio of the complex passage to that of the entire passage was very large. On the other hand, equivalent velocity could be expressed by the logarithmic function of the visibility. Also, as the tension of the students increased, the equivalent velocities were accelerated on all scenarios.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.600-608
• /
• 2013

The great Tohoku-oki earthquake which occurred on March 11, 2011, caused crustal movements in both Korea and Japan. This study attempts to analyze velocity changes of crustal movement of Korea Peninsula due to the Tohoku-oki earthquake and to compare the calculation with precious crustal movenents of Korea Peninsula. We found that the crustal movement velocity of South Korea increased 3.9 mm/yr northward and 7.5 mm/yr eastward on average as a result of the Tohoku-oki earthquake; when this figure is compared with the past crustal movement velocities of the Korea Peninsula.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.175-185
• /
• 2011

The threshold level of a receiver is analyzed for the simplification of system and the improvement of upstream data ratios in optical subscriber network of which the upstream date rate and the optical transmitted power are changed to meet the requested BER (Bit Error Rate) defined per interactive multimedia services. In asynchronous optical subscriber network of which the upstream to downstream data ratios are 1:1/2, 1:1/4, 1:1/8 and 1:1/16 with manchester coded downstream and NRZ (Non Return to Zero) downstream re-modulation, the BER performance is theoretically analyzed and it is performed by simulation with MATLAB according to the four types of downstream data for four models. The results have shown that in the cases which the upstream to downstream data ratios are 1:1/4, 1:1/8 and 1:1/16 the conventional receiver with threshold level of 1/2 can be applied regardless of average received optical powers and the BER is not much deteriorated compared with using the optimal threshold level. In the case that the upstream to downstream data ratio is 1:1/2 the threshold level in an optical receiver could be fixed at 1/3 and the BER is not much deteriorated compared with using the optimal threshold level as the average received optical power increases.