• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.69-89
• /
• 2019

Design chart solution and table solution were proposed by Choi et al. (2019a), which conducted a parametric numerical study for the bored PHC piles socketed into weathered rocks through sandy soil layers. Based on the Choi et al. (2019a), the new prediction formulae for mobilized capacity components such as total capacity, total skin friction and skin friction of sand at the settlement of 5% pile diameter were proposed in this study. The proposed prediction formulae (EQ-G1) considers pile diameter, relative embedment length and ${\bar{N}}$ (i.e, corrected N) value and their verification results are as follows. The SRF calculated from the new proposed design method was 71~94%, which are greatly improved compared with results by the existing design method. The design efficiency of bearing capacity was in the range of reasonable design except 4 cases, and the design efficiency of the PHC pile was evaluated as 85%. Therefore, it is possible that allowable compressive load (P_all) of PHC pile can be utilized in the resonable design by means of the new proposed method using EQ-G1 equations. And the other new proposed equations of EQ-G2-3 can be utilized approximately in calculation of axial compressive bearing capacity components for prebored PHC pile.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.91-100
• /
• 2019

Hollow prestressed concrete-filled steel tube (HCFT) piles, which combines PHC piles inside thin-wall steel tubes, were developed to increase the flexural strength of the pile with respect to the lateral load. Since P-M curves are needed for evaluating the structural safety of piles when applying HCFT piles to fields, equations for plotting P-M curves of HCFT piles in limit states were proposed. When the yield strength is applied to the steel tube and PC steel bar of HCFT piles, the proposed equations significantly underestimated the flexural strength of HCFT piles. Unlike the flexural strength test results, the proposed equations also provide greater flexural strengths for 12 mm thick steel pipe piles with the same diameter than for HCFT piles. However, when the ultimate strengths are used instead of the yield strengths for the steel tube and PC steel bar, the proposed equations provide the flexural strengths very close to the flexural strength test results.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.473-483
• /
• 2014

According to the Korean Building Code (KBC), the validity of the application of 800MPa grade steel(HSA800) to composite column should be verified by experimental or analytical method. Thus, stub column tests for encased and filled composite members with HSA800 steel were conducted, and axial strength and the validity of design compressive strength equations in KBC were evaluated. The test results show that the equation of the compressive strength of encased composite column member in KBC should be modified in order to use HSA800 steel without any reduction of specified minimum yield strength. For this purpose, it is suggested that the interval of hoop should be narrowed and the effective concrete area should be used. The equation of the compressive strength of filled composite column member in KBC is applicable to filled composite column with HSA800 steel without any modification.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1118-1125
• /
• 2009

This study, as basic research which was intended to develope the surface reinforcement method using reinforcement material which is applicable to very soft ground in Korea, was aimed at proposing Bearing Capacity Evaluation method for the surface ground improvement method. To that end, a wide width tensile test using geotextile, geogrid and steel bar (substitute for bamboo) and 21 kinds of the laboratory model tests with the end restraint conditions of the reinforcement that comprises the constrained and partially constrained (3 types) conditions were conducted. According to result of tests, Terzaghi's bearing capacity method is adequate to calculate bearing capacity in non-stiff material(geotextile, geogrid). But, It can't adequate to stiff material(bamboo net). So, New bearing capacity method suggest surface reinforcement method of very soft ground which Terzaghi's bearing capacity method modify for effect of stiffness.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.259-265
• /
• 2011

유량조사 자료는 하천유역의 물순환 구조 파악, 하천시설의 설치, 각종 수공 구조물의 설계, 하천 주변지역의 이용 및 관리 등 수자원 계획을 위한 기초자료로 다방면에서 활용되고 있다. 국토해양부는 전국 수위관측소를 대상으로 매년 100여개 지점에서 유량조사을 실시하고 있으며, 측정된 성과에 대한 체계적인 품질관리와 연구개발을 통해 유량자료의 품질향상 및 안정화를 위해 노력하고 있다. 본 연구는 2010년도 유량조사사업에서 수행한 4대강 권역 12개 수계 153개 지점에서 수행된 유량 측정성과에 대해서 수리특성 분석, 최대구간유량비 분석, 하천폭에 따른 측선수 비교, 불확실도 분석을 수행하였다. 또한 개발된 수위-유량관계곡선식을 통하여 산정된 유량자료에 대하여 연유출률 평가, 상 하류간 유량 비교, 연유출총량 등을 비교하여 산정된 유량자료의 적절성을 검토하였다. 2010년 조사자료의 측선수 평균은 유속계 36.7개, 부자 14.3개, 최대구간유량비는 유속계 6.7%, 부자 13.9%, 불확실도는 유속계 4.0%, 부자 7.7%로 나타났다. 개발된 수위-유량관계곡선식을 활용해 산정된 유출률의 전체 평균값은 61%로 2009년에 비해 약 10% 크게 나타났다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.5
• /
• pp.195-202
• /
• 2021

Offshore wind turbine (OWT) receive a combined vertical-horizontal- moment load by wind, waves, and the structure's own weight. In this study, the bearing capacity for the combined load of the suction foundation of OWT installed on the sandy soil was calculated by finite element analysis. In addition, the stress state of the soil around the suction foundation was analyzed in detail under the condition that a combined load was applied. Based on the results of the analyses, new equations are proposed to calculate the horizontal and moment bearing capacities as well as to define the capacity envelopes under general combined loads.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.1
• /
• pp.53-63
• /
• 2007

Soil risk assessment models were used to determine the goals of soil remediation and to establish the soil quality standards in developed countries. Recently, Korean Ministry of Environment prepared the guideline for soil risk assessment. Soil risk assessment model applicable to Korean situation will be needed in the near future. In this study, three models for soil risk assessment were extensively compared to suggest the fundamental components that required for the soil risk assessment in Korea. The models considered in this study were CalTOX in the United States, CLEA (Contaminated Land Exposure Assessment) in the United Kingdom, and CSOIL in the Netherlands. The major exposure routes and the intake estimation equations suitable for Korean situation were suggested. The exposure routes suggested were intake of the crops, underground water, indoor outdoor soil ingestion, dust inhalation and a volatile matter inhalation. The equations for intake estimation used in CalTOX and CSOIL seem to be applicable for the calculation of the human intake in Korea.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.2
• /
• pp.15-24
• /
• 2006

In this paper, the Coefficient of Subgrade Reaction was analyzed from the data which were the results of lateral pile loading tests and pressuremeter tests on construction sites. The prediction method with N-value was compared with lateral pile loading tests and the results of lateral pile loading tests were compared with the prediction method considering diameter of a pile. Also, the results of lateral pressuremeter tests were compared with those of lateral pile loading tests. As a result, consideration for a diameter and lateral deformation of a pile was needed when the coefficient of horizontal subgrade reaction is presumed. Therefore, a formula which is taking into account the allowable deformation of a pile was suggested from lateral pressuremeter tests in this study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.377-382
• /
• 2010

국내에는 약 14,000개의 중 소규모의 저수지들이 있다. 최근에 이상기후로 인한 많은 강우가 발생하여 저수지들의 월류나 파이핑으로 인한 붕괴가 지속적으로 일어나고 있어 많은 인명 및 재산피해가 발생하고 있다. 특히 설계홍수량을 초과하는 월류로 인한 댐 붕괴 발생 시 피해규모가 크기 때문에 전국적으로 본포되어 있는 저수지들의 설계홍수량을 시급히 파악하여 저수지의 수문학적 안전성을 판단하고 설계홍수량이 작은 저수지의 경우 별도로 관리 할 수 있어야 한다. 하지만 기존에 저수지의 안전여부를 판단 할 수 있는 댐 붕괴 모의의 경우 많은 시간과 노력이 요구 되어 저수지의 안전여부를 보다 쉽고 빠르게 판단 할 수 있는 기준 마련이 시급히 필요하다. 본 연구에서는 보다 쉽고 빠르게 소규모저수지의 수문학적 안전성 평가를 할 수 있는 간편법에 대하여 연구 하였다. 연구 방법은 HEC-HMS을 이용한 댐 붕괴와 본 연구에서 제시한 간편법을 통하여 홍수량의 비교 검토 및 저수지의 수문학적 안전성을 평가를 하였다. HEC-HMS의 첨두홍수량은 빈도별 지속시간별 확률강우량을 이용하여 산정하였으며, 가능최대홍수량(PMF)은 실제호우전이법으로 산정한 가능최대강수량(PMP)을 이용하였다. 간편법의 첨두홍수량은 합리식과 통합형 강우강도식을 이용하여 산정하였고, 가능최대홍수량(PMF)은 Creager공식을 이용하여 산1)정하였다. 댐 붕괴의 경우 HEC-HMS에서는 댐 붕괴 모듈을 실행하여 모의를 하였고, 간편법의 댐 붕괴는 여수로의 한계 유출을 파악할 수 있는 위어공식을 이용하여 댐 붕괴 모의를 하였다. 마지막으로 산정된 첨두홍수량과 가능최대홍수량(PMF)을 작성된 수문학적 안전성 평가표에 기입하여 비교 분석하였다. 연구결과 HEC-HMS로 산정한 빈도별 첨두홍수량 가능최대홍수량(PMF)과 간편법으로 구한 빈도별 첨두 홍수량 가능최대홍수량(PMF)의 차이는 약 편차가 50%정도로 간편법으로 구한 첨두홍수량 가능최대홍수량(PMF)이 더 크게 산정되었다. 편차의 발생 이유는 본 연구에서 제시한 간편법의 경우 안전율을 고려한 경험공식을 사용하였기 때문이라고 판단되며, 간편법을 통한 소규모저수지의 수문학적 안전성 평가를 다른 대상지역의 소규모저수지에도 적용하여 보고 수문학적 평가방법이 올바르게 적용 될 수 있는지 확인이 필요하다고 판단된다.

• Journal of Korea Water Resources Association
• /
• v.51 no.9
• /
• pp.813-826
• /
• 2018

Recently, weather radar system has been widely used for effectively monitoring near real-time weather conditions. The radar rainfall estimates are generally relies on the Z-R equation that is an indirect approximation of the empirical relationship. In this regards, the bias in the radar rainfall estimates can be affected by spatial-temporal variations in the radar profile. This study evaluates the uncertainty of the Z-R relationship while considering the rainfall types in the process of estimating the parameters of the Z-R equation in the context of stochastic approach. The radar rainfall estimates based on the Bayesian inference technique appears to be effective in terms of reduction in bias for a given season. The derived Z-R equation using Bayesian model enables us to better represent the hydrological process in the rainfall-runoff model and provide a more reliable forecast.