• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2002.11a
• /
• pp.11-15
• /
• 2002

현재 공통평가기준을 이용하여 작성된 대부분의 파이어월과 VPN, 스마트 카드의 보호 프로파일의 기능요구사항에 영역분리기능이 포함되어 있다. 공통평가기준의 영역분리기능은 미국 국방성 운영체제 평가 기준인 TCSEC이 요구하는 보증수단에서 유래하였다. 8086프로세서는 리얼 모드라는 세그멘테이션 메커니즘을 처음으로 이용하여 향상된 메모리 주소관리를 제공하고 있으며, 80$\times$86은 리얼 모드이외에 보호모드를 제공하여 시스템 영역과 응용프로그램영역을 분리시킬 수 있는 메커니즘을 제공한다. 인텔 80$\times$86 프로세서의 구조적인 발전을 이용하여 구현된 Trusted OS는 링 상태(ring state)라고 알려져 있는 영역 분리기능을 제공하여 시스템의 영역을 응용 프로그램 영역으로부터 보호하는 메커니즘을 구현하고 보증하고 있다. 단 논문에서는 인텔 마이크로 프로세서 8086과 80$\times$86의 구조와 메모리 관리방법을 고찰하여 8086과 비교한 80$\times$86의 발전된 보호모드 메커니즘을 연구하여 시스템영역을 보호할 수 있는 영역분리 메커니즘을 연구하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1556-1557
• /
• 2007

LCD BLU에 광원의 수명을 측정하고, 고장모드를 분석하기 위해서는 광원을 구성하고 있는 각각의 성분 중에서 광원 자체를 구성하고 있는 R/G/B 광원에 대한 Burn-in test 및 고장모드를 분석하였다. LCD BLU에 있어서 R/G/B LED광원의 역할은 BLU 자체의 수명과 성능에 가장 큰 영향을 미친다. 서로 각각 사용조건하에서의 수명과 성능의 차이에 따라서 BLU 자체의 수명이 결정된다. 이를 평가가기 위해 LED device에 대한 가속수명테스트를 위한 Burn-in test를 실시하였으며, 발생한 고장모드를 분석하였다. 분석결과 누설전류 증가로 인한 불량이 주로 발생하였다. 누설전류 증가를 평가하기 위해 Photo emission microscope(PHEMOS-1000, MoDooTEK Inc.)을 이용하여 저전류에서의 LED chip의 누설전류에 의한 발광을 관찰함으로 인해, LED chip의 신뢰성 및 평가 기준이 됨을 알 수 있다.

• Journal of the HCI Society of Korea
• /
• v.12 no.1
• /
• pp.25-32
• /
• 2017

The purpose of this study is to evaluate the effectiveness of one-handed interaction modes for supporting the dead zone that users must be difficulty in performing the touch manipulation with only one hand. For the purpose, this study analyzed two existing one-handed modes in iPhone and Android smartphones, and proposed and implemented two additional one-handed modes. In order to investigate effectiveness of the one-handed modes, we performed the experiment that compared normal touch mode with the four one-handed modes. Experimental results showed that all one-handed modes required more time than normal touch mode because of the time requiring in both mode change and recognition. However, the participants had difficulty in manipulating continuous touches at dead zone area with only normal touch. Moreover, the subjective satisfaction was high in one-handed modes thanks to touch convenience and smooth transition effects in mode change. In special, the one-handed mode at iPhone was the most effective out of the tested modes.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.115-124
• /
• 1993

A structural system reliability analysis is studied for the safety assessment of midship section. Probabilistically dominant collapse modes are generated by Element Replacement Method and Incrimental Load Method. In order to avoid generating the same modes repeatedly, it is branched at final plastic hinge. Using first and second order bound methods, system failure probability of midship section is computed and compared with deterministic load factor method to show the usefulness of the proposed method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.1
• /
• pp.46-51
• /
• 2015

Stainless steel is a popular structural materials for liquid-hydrogen storage containers and piping components for transporting high-temperature fluids because of its superior material properties such as high strength and high corrosion resistance at elevated temperatures. In general, tungsten inert gas (TIG) arc welding is used for bonding stainless steel. However, it is often reported that the thermal fatigue cracks or initial defects in stainless steel after welding decreases the reliability of the material. The objective of this paper is to clarify the characteristics of ultrasonic guided wave propagation in relation to a change in the initial crack length in the welding zone of stainless steel. For this purpose, three specimens with different artificial defects of 5 mm, 10 mm, and 20 mm in stainless steel welds were prepared. By considering the thickness of s stainless steel pipe, special attention was given to both the L(0,1) mode and L(0,2) mode in this study. It was clearly found that the L(0,2) mode was more sensitive to defects than the L(0,1) mode. Based on the results of the L(0,1) and L(0,2) mode analyses, the magnitude ratio of the two modes was more effective than studying each mode when evaluating defects near the welded zone of stainless steel because of its linear relationship with the length of the artificial defect.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.30-37
• /
• 2015

The estimation of system damping parameter of the response signal with lower natural frequency and higher damping parameter from free vibration is affected by the wavelet center frequency. This study discusses these considerations in the context of the wavelet's multi-resolution character and includes guidelines for selection of wavelet center frequency. The experiment with H-Beam and numerical examples with respect to three cases (i)single mode, (ii)separated modes and (iii)close modes demonstrate the validity of method to improve the accuracy of the estimated damping parameter. The localization of the corresponding scale for the total scales is determined by the natural frequency of the analysing mode and is affected by the wavelet center frequency. Thus, the reliability for the accuracy of the estimated damping parameter can be improved by the corresponding scale of the natural frequency for the analysing mode is localized at the half of the total scales.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.2
• /
• pp.147-155
• /
• 2007

In this study, the performance of the modified sliding mode control proposed in the previous study is evaluated for seismic response control of nonlinear hysteretic structures. Modified sliding mode control(MSMC) utilizes the target derivative of Lyapunov function in order to calculate control force, and its performance was evaluated only lot linear structures in the previous study. However, considering that most structures subject to strong earthquake show nonlinear hysteretic behivior, the results from the previous study have limitations in practical application. The results from numerical analyses of single degree of freedom systems and base isolated system, which were described using Bouc-Wen model, indicate that the proposed MSMC algorithm shows better control performance than the existing sliding mode controller.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.3
• /
• pp.293-310
• /
• 2020

The purpose of this study is to present the most effective smoke exhaust mode by comparing the quantitatively evaluated risks according to the smoke exhaust mode when a train fire occurs in a subway platform. Therefore, applying the typical subway platform as a model, train fire scenarios are developed with the evacuation start time and location of the fire train for each exhaust mode. The fire accident rates (F) are calculated and the number of fatalities (N) was quantitatively estimated by fire analysis and evacuation analysis for each scenario. In addition, the F/N curve compared with the social risk assessment criteria and the following conclusions were obtained. In the event of a train fire at the subway station platform, the evacuation must start up within 600 s in maximum to ensure the evacuees' safety. To secure evacuation safety, it is advantageous to operate the HVAC system of the platform in the air-supply mode at station without TVF. Comparing the F/N curve for each exhaust mode with the social risk criteria, it turned out that the risk significantly exceeds the social risk criteria in case of no mechanical ventilation. As a result, this paper shows that the ventilation mode in which TVF are exhausted and HVAC system is operated in the pressurized mode are the most effective smoke exhaust mode for ensuring evacuation safety.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.195-198
• /
• 2011

석유 및 천연가스 생산에 사용되는 고정식 해양플랜트에는 자켓 구조물이 가장 많이 사용되고 있다. 생산에 사용되는 자켓 구조물은 풍하중이나 파랑하중에 의해 인명의 피해 없이 변위 및 응력에 대해 안전해야 한다. 그러나 1940년대 후반부터 사용되어 온 자켓 구조물은 피로하중, 노후화로 인해 내구성에 문제가 생기고 있다. 본 논문에서는 자켓 구조물의 안전성을 검토하기 위해 모드형상을 이용하여 자켓 구조물의 손상 위치를 탐색하는 방법을 제시한다. 제시한 손상탐지기법의 효용성을 입증하기 위해 자켓 구조물의 유한요소모델에 임의의 손상을 모사하였다. 유한요소모델의 손상 전 모드형상과 손상 후 모드형상의 모달 변형에너지의 변화를 이용하여 손상 지수를 유도하고 유도한 손상지수를 사용하여 손상이 있는 부재와 손상이 없는 부재를 분류하였다. 연구 결과 손상지수가 '0'인 부재를 제외한 나머지 부재 모두 본 연구에서 제시한 손상탐지기법으로 손상 부재를 판별할 수 있었다.

• Journal of Radiation Protection and Research
• /
• v.37 no.4
• /
• pp.191-196
• /
• 2012

A double-scattering type Compton camera which is appropriate to imaging a high-energy gamma source has been developed for nuclear material surveillance at Hanyang University. The double-scattering type Compton camera can provide high imaging resolution; however, it has disadvantage of relatively low imaging sensitivity than existing single-scattering type Compton camera. In this study, we introduce a novel concept of a dual-mode Compton camera which incorporates two different types of Compton camera, i.e., single- and double-scattering type. The dual-mode Compton camera can operate high-resolution mode and high-sensitivity mode in a single system. To maximize its performance, the geometrical configuration was optimized by using Geant4 Monte Carlo simulation toolkit. In terms of imaging sensitivity, high-sensitivity mode had higher sensitivity than high-resolution mode up to 100 times while high imaging resolution of the double-scattering Compton camera was maintained.