• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.7
• /
• pp.891-899
• /
• 1997

This paper presents the results of a detailed experimental examination of fully developed asymmetric flows between annular tubes with square-ribbed surface roughness. The main emphasis of the research has been on establishing the turbulence structure, particularly in the central region of the channel where the two dissimilar wall flows interact. Measurements have included profiles of time mean velocities, turbulence intensities, turbulent shear stresses, triple velocity correlations, skewness, and flatness. The region of greatest interaction is characterized by strong diffusional transport of turbulent shear stress and kinetic energy from rough toward the smooth wall region, giving rise to an appreciable separation between the planes of zero shear stresses depending on positions of roughness on the walls.

• Journal of Chest Surgery
• /
• v.36 no.10
• /
• pp.784-788
• /
• 2003

Swyer-James syndrome is a rare disease with patients presenting with unilateral hyperlucent lungs and hypoperfusion due to hypoplasia of the pulmonary artery and bronchiolitis obliterans. A unilateral hyperlucent lung generally develops after a lower respiratory tract infection during early childhood. In extremely rare cases, an association of bronchogenic carcinoma with Swyer-James syndrome has been reported. We report a case of bronchogenic squamous cell carcinoma associated with Swyer-James syndrome that performed right upper lobectomy and lymph node dissection with a relevant literature review.

• Transactions of Materials Processing
• /
• v.14 no.1 s.73
• /
• pp.43-48
• /
• 2005

The production of metal strip with uniform thickness and flatness are two important problems associated thin strip rolling. The thickness and flatness of strip are affected by the flattening of contact surface between strip and roll, the elastic recovery and the bending of roll. Especially, the flatness of the strip is greatly affected by bending deflection of roll. The roll must be designed considered the elastic deformation of roll. This study describes the measurement of thickness and flatness of strip and shows the crown roll for producing flat strip. But it is difficult to produce the crown roller. The cross rolling that is a simple method which can produce the flat strip is introduced and it is found the optimal cross angle for improvement of flatness of plate. These problems are solved by the MARC code on the basis of elastic-plastic material and the updated Lagrangian formulation.

• Korean Journal of Head & Neck Oncology
• /
• v.27 no.2
• /
• pp.240-242
• /
• 2011

Branchiogenic carcinoma is extremely rare and is defined as a malignant degeneration within the confines of epithelial remnants derived from the embryonal branchial apparatus. Two major diagnostic criteria are histologic proof of transitional area from normal cyst epithelium to invasive squamous cell carcinoma and absence of an identifiable primary carcinoma elsewhere. A 62-year old woman visited our department complaining of a non-tender, movable mass in left upper lateral neck. After a complete mass excision, histopathologic diagnosis of the surgical specimen was branchiogenic squamous cell carcinoma. I report a case of branchiogenic carcinoma with literature review.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.273-276
• /
• 2006

The focus of this study is on the enhancement of flatness for the shielded slot plate, one of main components of the MCFC stack. The shielded slot plate is to get curvature during manufacturing process since it is produced by forming operation from only one side of it. Therefore, a correction die is proposed to place just after the main die to apply unbending on the curved plate to get almost flat product. In the design for the correction die, four kinds of design factors are selected to study which factor is the most influencing one affecting the flatness of the plate. From the experimental results using Taguchi method, it has been revealed that the Young's modulus of urethane die is the most critical factor.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.50-56
• /
• 2004

Finishing is the final process in molds manufacturing and consumes much process time. Also, it influences on surface quality of molds. But, there are few systematic methods to control the process. In this work, basic experiments were carried out to study the machining characteristics of the finishing tools. From the experiments, critical surface roughness and wear coefficient are suggested to reduce the number of finishing steps and to plan a systematic finishing procedure. Comparison experiments were carried out between the expert's method and the new method, which is based on the results of this research. From the experiments, it is verified that the systematic method takes less time and generates less form error in the machined surface than the worker's method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.3
• /
• pp.376-388
• /
• 1997

In this study, an experiment was performed to investigate the characteristics of pressure drop and heat transfer of multi-channel tubes for automotive condenser using HFC-134a as an alternative refrigerant. The mass flux and inlet saturation pressure of the refrigerant were controlled, respectively, in the range of 200 to $500kg/m^2s$ and 1.0 to 1.6MPa. Pressure drop and heat transfer coefficient were compared with the previously proposed correlations and new correlations based on Traviss' correlation were suggested. Prediction of pressure drop and heat transfer coefficient based on the new correlations agrees with experimental results within ${\pm}9%$ and -18~+11%, respectively.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1735-1737
• /
• 1996

Using a modified Michelson interferometer configuration, the flatness of micro mirror cell surface was probed. Interferograms were captured at CCD camera plane by defocusing object beam onto the micro mirror with microscope objective lens. And these were compared with the interferograms made with the flat metallic mirror. Also, the theoretical analysis is presented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.194.1-194.1
• /
• 2014

기저면에 구조적 결함을 도입함으로써 그래핀과 $MoS_2$와 같은 이차원 결정의 물리, 화학, 전기 및 기계적 성질을 제어하려는 연구가 폭넓게 수행되고 있다. 본 연구에서는 플라즈마 속의 산소 래디컬을 이용하여 기계적 박리법으로 만들어진 단일층 그래핀과 $MoS_2$ 표면에 구조적 결함을 유도하고 제어하는 방법을 개발하였다. 라만 및 광발광 분광법을 통해 생성된 결함 밀도를 측정하고 전하 밀도 등의 화학적 변화를 추적하였다. 그래핀의 경우 산소 플라즈마 처리 시간에 따라 결함(defect)의 정도를 보여주는 라만 D-봉우리의 높이와 넓이가 커짐을 확인하였고 이를 G-봉우리의 높이와 비교하여 정량하였다. $MoS_2$의 경우 $E{^1}_{2g}$와 $A_{1g}$-봉우리의 높이가 점점 감소하고 광발광의 세기 또한 감소함을 확인하였다. 또한 본 연구에서는 기판의 편평도가 결함 생성 속도에 미치는 영향을 비교 및 분석하여 반응 메커니즘을 제시하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.194.2-194.2
• /
• 2014

기저면에 구조적 결함을 도입함으로써 그래핀과 $MoS_2$와 같은 이차원 결정의 물리, 화학, 전기 및 기계적 성질을 제어하려는 연구가 폭넓게 수행되고 있다. 본 연구에서는 플라즈마 속의 산소 래디컬을 이용하여 기계적 박리법으로 만들어진 단일층 그래핀과 $MoS_2$ 표면에 구조적 결함을 유도하고 제어하는 방법을 개발하였다. 라만 및 광발광 분광법을 통해 생성된 결함 밀도를 측정하고 전하 밀도 등의 화학적 변화를 추적하였다. 그래핀의 경우 산소 플라즈마 처리 시간에 따라 결함(defect)의 정도를 보여주는 라만 D-봉우리의 높이와 넓이가 커짐을 확인하였고 이를 G-봉우리의 높이와 비교하여 정량하였다. $MoS_2$의 경우 $E{^1}_{2g}$와 $A_{1g}$-봉우리의 높이가 점점 감소하고 광발광의 세기 또한 감소함을 확인하였다. 또한 본 연구에서는 기판의 편평도가 결함 생성 속도에 미치는 영향을 비교 및 분석하여 반응 메커니즘을 제시하고자 한다.