• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.329-334
• /
• 1997

기포막 제한 및 기포 군집 이론에 의한 해석적 접근을 통해 축방향 출력분포가 임계열속에 미치는 영향을 파악하고, 이를 근거로 임계열속 발생지점에서의 엔탈피 변화를 고려하여 축방향 출력분포에 따른 임계열속 예측치 보정 모델을 개발하였다. 제안된 모델의 검증을 위해 cosine 형태의 축방향 출력분포를 갖는 임계열속 측정치와 비교하였으며, 그 결과 제안된 모델은 측정치에 대해 평균 1.0072, 표준편차 9.98%의 예측 성능을 나타냈다.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.1
• /
• pp.45-52
• /
• 2000

We examined and corrected the periodic error of the LX200-16 Telescope driving system of Chungbuk National University Campus Observatory. Before correcting, the standard deviation of the periodic error in the direction of East-West was $\sigma$=7."2. After correcting, we found that the periodic error was reduced to $\sigma$=1."2.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.3
• /
• pp.323-332
• /
• 2012

An airborne LiDAR system performs several observations on flight routes to collect data of targeted regions accompanying with discrepancies between the collected data strips of adjacent routes. This paper aims to present an automatic error correction technique using modified ICP as a way to remove relative errors from the observed data of strip data between flight routes and to make absolute correction to the control data. A control point data from the existing digital topographic map were created and the modified ICP algorithm was applied to perform the absolute automated correction on the relatively adjusted airborne LiDAR data. Through such process we were able to improve the absolute accuracy between strips within the average point distance of airborne LiDAR data and verified the possibility of automation in the geometric corrections using a large scale digital map.

• Journal of the Korean earth science society
• /
• v.39 no.2
• /
• pp.139-153
• /
• 2018

The sea surface wind field has long been obtained from satellite scatterometers or passive microwave radiometers. However, the importance of satellite altimeter-derived wind speed has seldom been addressed because of the outstanding capability of the scatterometers. Satellite altimeter requires the accurate wind speed data, measured simultaneously with sea surface height observations, to enhance the accuracy of sea surface height through the correction of sea state bias. This study validates the wind speeds from the satellite altimeters (GFO, Jason-1, Envisat, Jason-2, Cryosat-2, SARAL) and analyzes characteristics of errors. In total, 1504 matchup points were produced using the wind speed data of Ieodo Ocean Research Station (IORS) and of Korea Meteorological Administration (KMA) buoys at Marado and Oeyeondo stations for 10 years from December 2007 to May 2016. The altimeter wind speed showed a root mean square error (RMSE) of about $1.59m\;s^{-1}$ and a negative bias of $-0.35m\;s^{-1}$ with respect to the in-situ wind speed. Altimeter wind speeds showed characteristic biases that they were higher (lower) than in-situ wind speeds at low (high) wind speed ranges. Some tendency was found that the difference between the maximum and minimum value gradually increased with distance from the buoy stations. For the improvement of the accuracy of altimeter wind speed, an equation for correction was derived based on the characteristics of errors. In addition, the significance of altimeter wind speed on the estimation of sea surface height was addressed by presenting the effect of the corrected wind speeds on the sea state bias values of Jason-1.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.314-318
• /
• 2005

잠실 및 신곡 수중보의 영향을 모의할 수 있도록 개선된 FLDWAV 모형을 한강 하류부의 하천구간에 적용하여 모형의 보정을 수행하였다. FLDWAV 모형에 포함된 자동추정 기법을 적용하여 부분 선형함수 가변 조도계수 모형의 매개변수를 추정하였다 팔당대교부터 전류까지의 하천구간을 3개 구간으로 구분하고, 유량 등급별 조도계수의 초기 가정치를 변화시켜 가며 각 경우에 대하여 홍수사상별로 매개변수 추정을 수행하였다. 최소유량(영) 등급 및 최대유량 등급에 대한 조도계수 추정치들은 초기 가정 값에 민감하여 초기치가 최종 추정치로 종료되는 경우가 다수 발생하였다. 대부분의 홍수사상에 대하여 추정 매개변수를 사용한 계산수위와 관측수위의 편차 합은 영에 근접하나, RMS 오차는 다양한 값들을 나타내었다. 양의 오차들과 음의 오차들이 서로 상쇄됨으로써 편차가 영에 근접하게 되는 경우가 빈번히 발생하였으며, 이는 편차 합을 최소화하는 목적함수를 만족시키는 최적해가 유일하지 않음을 의미한다.

• Korean Journal of Remote Sensing
• /
• v.38 no.2
• /
• pp.189-198
• /
• 2022

In this present study, we investigated the effect of the offset correction factor calculation method on the sulfur dioxide (SO₂) column density in the SO₂ retrieval algorithm of the Geostationary Environment Monitoring Spectrometer (GEMS) launched in February 2020. The GEMS operational SO₂ retrieval algorithm is the Differential Optical Absorption Spectroscopy (DOAS) - Principal Component Analysis (PCA) Hybrid algorithm. In the GEMS Hybrid algorithm, the offset correction process is essential to correct the absorption effect of ozone appearing in the SO₂ slant column density (SCD) obtained after spectral fitting using DOAS. Since the SO₂ column density may depend on the conditions for calculating the offset correction factor, it is necessary to apply an appropriate offset correction value. In this present study, the offset correction values were calculated for days with many cloud pixels and few cloud pixels, respectively. And a comparison of the SO₂ column density retrieved by applying each offset correction factor to the GEMS operational SO₂ retrieval algorithm was performed. When the offset correction value was calculated using radiance data of GEMS on a day with many cloud pixels was used, the standard deviation of the SO₂ column density around India and the Korean Peninsula, which are the edges of the GEMS observation area, was 1.27 DU, and 0.58 DU, respectively. And around Hong Kong, where there were many cloud pixels, the SO₂ standard deviation was 0.77 DU. On the other hand, when the offset correction value calculated using the GEMS data on the day with few cloud pixels was used, the standard deviation of the SO₂ column density slightly decreased around India (0.72 DU), Korean Peninsula (0.38 DU), and Hong Kong (0.44 DU). We found that the SO₂ retrieval was relatively stable compared to the SO₂ retrieval case using the offset correction value on the day with many cloud pixels. Accordingly, to minimize the uncertainty of the GEMS SO₂ retrieval algorithm and to obtain a stable retrieval, it is necessary to calculate the offset correction factor under appropriate conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.31-38
• /
• 2015

In this paper, change of load carrying capacity of bridges with time was analyzed referring to the safety inspect data stored in the KISTEC. From this study, it was known that the capacity is rated differently by various parameters such as inspector's subjective. Accordingly, an improved method, in this paper, is suggested which can correct deviation due to several uncertainties involved in rating process. The suggested method can be utilized for efficient maintenance of bridges such as cycles and determination of priority of retrofit, and estimation of service life etc.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.2
• /
• pp.177-188
• /
• 2024

The strategic UAV for theater level ISR(Intelligence, Surveillance and Reconnaissance) mission typically has numerous ground targets over area of responsibility(AOR) or area of operation(AO). It is necessary to automatically incorporate these multitude of ground targets into mission planning process in order to collect ISR images before actual flight mission. In addition, weather information such as wind direction and/or velocity may have significant impacts on the qualities of collected sensor images, especially in SAR(Synthetic Aperture Radar) images. Thus weather factors in the operation altitude should also be considered in the mission planning stage. In this study, we propose a novel mission planning scheme based on target scheduling and deviation correction method incorporating weather factors.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.165-165
• /
• 2012

육상, 해양, 항공 등의 응용분야에 위성항법보강시스템의 활용을 위해서는 시스템의 정확성, 무결성, 연속성, 가용성 요구 조건을 만족하도록 설계되어야 하며, 무결성 요구 조건을 만족시키기 위하여 측위 오차 및 위협 요인들을 지상국에서 감시해야한다. 특히, 전리층 변화는 지역적으로 경향 및 세기가 달라 전리층 폭풍 발생 시 지상국과 이동체에서 받은 위성항법 신호에 포함된 전리층 지연 오차의 편차가 심하여 위성항법 사용자의 무결성, 즉 안정성이 위협을 받는 상황이 발생할 수 있으므로, 해당지역의 전리층 변화에 대한 사전 정보를 통해 지역별로 적합한 위협 모델을 구성하여 전리층 활동 감시가 필요하다. 전리층 기울기는 전리층 지연값 분포의 불균일 여부를 정량화한 값으로, 전리층 폭풍 발생시 기울기가 급증하여 전리층 폭풍 감지를 위한 지표로 활용될 수 있다. 이 연구에서는 육상 교통 위성항법보강시스템의 무결성 감시에 전리층 변화 기능을 적용하기 위한 기본 연구로 IGS에서 제공하는 전리층 보정정보를 이용하여 한반도 상공에 대한 전리층 기울기 분포 및 변화 경향을 파악하고, 이러한 분석 결과를 전리층 기울기에 대한 보정정보 오차범위 설정이나 전리층 폭풍 발생 판단에 필요한 임계값 설정 등에 적용하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2591-2593
• /
• 2005

본 연구는 물체의 좌우측 상단에 연결된 와이어로프를 모터 및 드럼을 통하여 감아 올리거나 내려 놓는 과정에서 물체가 수평상태를 유지하여 이동될 수 있도록 Two Motor-Two Drum 형식의 권양기를 제어 하는 권양기의 밸런스제어장치에 관한 것이다. 본 연구에 Two Motor-Two Drum 형식의 권양기 제어장치에 있어서, 물체의 상단에 연견된 일측 와이어로프와 타측 와이어로프의 이동길이를 실시간으로 검출하는 와이어로프 이동길이검출부와, 이 와이어로프 이동길이검출부를 통하여 검출되는 일측 와이어로프와 타측 와이어로프의 이동길이를 비교하여 물체의 기울어진 좌 우 편차를 검출하는 편차검출부와, 이 편차검출부를 통해 검출되는 좌우 편차를 제거하기 위하여 일측 또는 타측 와이어로프가 감겨있는 드럼을 회전시키는 모터의 구동속도를 조절하여 물체를 수평상태로 보정하는 밸런스제어부로 구성 되어 있다.