• Journal of Institute of Convergence Technology
• /
• v.1 no.1
• /
• pp.5-8
• /
• 2011

Thermal analysis of a cooling module using Peltier elements are performed using a commercial software, CFD-ACE+. A standard k-e two-equation turbulent model is applied in order to represent the turbulent shear stress. Computed values are compared with the theoretical values for the validation. The effect of mass flow rates and transferred heat amounts on the temperature distributions inside the cooling system is analyzed. It was found that the increase in the mass flow rates causes the exit temperature rise. The increase in the absorbed heat amount diminished the overall temperature on the fin surfaces. In the present analysis, the material characteristics of the Peltier element itself are not considered. In the future, the effect of the turbulence models and material characteristics will be studied in detail.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.93.2-93.2
• /
• 2018

최근 기후 변화 문제로 $CO_2$배출량 억제 정책에 따라 열전재료가 다양한 분야에 크게 주목 받고 있다. 열전 모듈은 전류를 흘려 온도차를 발생시키는 펠티어 효과와 온도차를 전력으로 변환하는 제백 효과를 이용한다. 열전발전용에 적용되는 상용 열전모듈의 경우, 열전소자의 접합부의 수는 수십 개 이상이다. 따라서 단 한 개의 접합 불량 열전소자가 모듈 전체의 열전성능에 큰 영향을 미친다. 현재 상용화 된 Bi-Te계 열전 모듈은 Bi-Te의 Te와 Sn계 솔더의 주성분인 Sn이 $250^{\circ}C$ 부근에서 취성의 Sn-Te계 금속 화합물을 형성한다고 알려져 있다. 이 때 생성된 Sn-Te 화합물은 열전모듈의 접합강도를 약화시키고 이로 인해 열전모듈의 접합 신뢰성을 크게 저하 시킬 수 있다. 이를 해결하기 위해 솔더와 소자 사이에 확산방지층이 적용되고 있으며, 이 중에서 니켈합금이 가장 널리 적용되고 있다. 니켈층을 형성시키는 방법 중에서, 무전해 도금법은 간단하게 열전소자 표면 위에 도금 층을 균일한 두께로 만들어 낼 수 있다. 하지만, 니켈 도금층과 Bi-Te 소자 간에 화학적 결함이 존재하지 않기 때문에, 무전해 니켈 도금층의 밀착성이 떨어진다. 이 때. 소자 표면에 거칠기 효과(anchor effect)를 부여하기 위해 물리적 샌딩법을 사용하는데 이 방법의 경우 소자에 크랙 같은 손상을 미쳐 열전모듈의 신뢰성 저하를 가져온다. 그러므로 거칠기 효과를 부여하면서 소자에 손상을 최소화하는 습식 식각법을 개발하여 Bi-Te계 열전소자의 표면 조도를 조절하고 무전해 Ni-P 도금을 실시하였다. 그리고 열처리 유무에 따른 열전모듈의 접합강도를 측정하였으며, 제작한 열전 모듈의 접합부 및 파단부의 계면 분석하여 무전해 Ni-P도금을 위한 습식식각법(wet etching법)에 대하여 검토하였다. N-type은 질산과 구연산의 혼합수용액에, P-type은 왕수에 습식 식각처리를 해서 적당히 표면 조도를 조절한 후에 EPMA로 분석을 해본 결과 니켈 도금층과 Bi-Te 소자 간에 anchor effect가 부여 된 것을 확인했다. 습식 식각에 의해서 제조된 열전모듈의 접합강도는 종래의 알루미나 샌딩법으로 제조한 열전모듈 보다 높은 접합강도를 나타내었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.343-345
• /
• 2007

Temperature difference between two plates occurs when a current is passed though two semi-conductors that are connected each other at two junctions. The current drives a transfer of heat from one junction to the other. In this study, the thermoelectric module based on th "Peltier effect" was made by combing fullerene and polyaniline. Continuous temperature measurements on both surfaces were performed at room temperature($25.4^{\circ}C$) by an infrared non-contact thermometer. The results showed that cool ing effect of $2.2^{\circ}C$ was attained by 30 seconds, after which the effect was continuously vanished mainly due to electro decomposition.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.301-307
• /
• 2010

Actuation using a shape memory alloy (SMA) is considered to be an important technology that will play a leading role in market for next-generation medical devices because an SMA actuator can accurately imitate skillful and delicate hand movements. However, SMA actuators have not been successfully used because of problems in control design caused by the nonlinear hysteresis effect of SMA, which leads to inaccuracies in control systems. In order to overcome the effect, the authors invented a SMA actuator, which could actively and rapidly cool down and heat up, by combining a SMA catheter and a TE module using the Peltier effect. In order to evaluate the TE characteristics of our TE module system, the changes in the temperature with 1) incremental increases in a continuous electric current and 2) the appearance of a discontinuous constant or reverse current are discussed in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.733-737
• /
• 2007

The object of this paper is to propose a method to solve resulting heat in using numerous modulized watt-class LEDs in MCPCB as lighting device. To use LED for lighting, the chip needs to have a large capacity, resulting in extra heat in P-N connection area. To solve this problem, a Pottier Module, heat-sink panel and a fan was installed to measure variations in the temperature. Additionally, temperature variation characteristics were observed according to the heat conductor panel connecting cooling module and heat-sink panel, insulator and thermal grease. As a result, the type and amount of heat-sink panel was the most important facto. The fan would effect the temperature by max. $18[^{\circ}C]$ while other materials affected the temperature by $2{\sim}3[^{\circ}C]$, showing significant difference.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1547-1552
• /
• 2008

The tip of these catheter with straight needles is not able to reach in the vicinity of the disc bulging, which are the cause of the low back pain and because the far indirect radio-frequency treatment results in the decompression, the nucleoplasty has the limit. Many incurable diseases has not been solved due to the unexistence of the advanced technique for the MIS human body catheter device. To increase the possibility of nucleoplasty, the needle tip should be located at the closest area of the lesion. For this reason, the best way to increase the success rate of the operation is that the needle tip should access 3-dimensionally to the operating field as soon as possible. To achieve this aim, our studies are restricted as follows: 1) the SMA catheter design to control the 3-dimensional direction, 2) the security of the immediate response by the positive control of the SMA element thermal distribution using Peltier thermoelectric elements, 3) the aquisition of the control data by monitoring the relationship between the temperature of SMA element and the displacement, and 4) the design of the controller to guarantee the accurate location.