• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.236-239
• /
• 2003

The spent fuel slitting device is an equipment developed in order to feed UO$_2$pellet to the dry pulverizing/mixing device. In this study, we have compared and analyzed the handling method of the slitting and that of the pellet and hull, processing time, separating time for 20kgHM, the number of blades, on the existing slitting device using in DUPIC, and spent fuel management technology research and test facility. Also, we have compared and analyzed about an advantage and weak point, designing and producing, processing, establishment, operation, maintenance about the vertical and horizontal slitting device. Based on these results, we have developed the vertical slitting device. By using the results, we have enhanced the slitting processing time(over 40%)in comparison with DUPIC device, and it will is effectively applied to available data for designing and producing of the hot test facility.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.3
• /
• pp.109-115
• /
• 2018

This paper proposes the method to develop the fuel of suljigemi pellet using agricultural by-products the occurred during the manufacturing of alcohol. The goal of the development of suljigemi using biomass is to make the pellet fuel of high calorie. The suljigemi pellet is difficult to recycle waste in the manufacture company of alcohol. suljigemi pellet has the effect of zero emission as the soil conditioner using ash after burning. Also suljigemi pellet has the reduction effect of carriage fee, fuel economy and low-cost high-efficiency effects, environmentally clean fuel as CO2 emissions savings. So the technologies of the suljigemi fuel pellet are developing low carbon, green growth renewable energy fuel through futuristic energy system will be. In experiments, suljigemi pellets confirmed the calories by about 10% higher than wood pellets with the same conditions.

• Journal of Biosystems Engineering
• /
• v.9 no.1
• /
• pp.53-61
• /
• 1984

배합사료공장(配合飼料工場)의 생산규모(生産規模) 및 생산사료종류별(生産飼料種類別) 소요(所要) 투자(投資) 자본(資本)을 추정(推定)할 수 있는 모델을 개발(開發)하였다. 켄사스 주립대학교(Park, 1982)에서 개발(開發)된 배합사료공장(配合飼料工場)의 설계(設計) 모델을 이용(利用)하여 기계(機械) 및 비품(備品)값, 설치비용(設置費用), 건축비용(建築費用), 전기기구(電氣器具) 및 전기시설비(電氣施設費) 등을 관련업체의 도움을 얻어 분석(分析)하였으며, 모델에 적용(適用)된 공장(工場)의 규모(規模)는 10 ton/hr에서 40 ton/hr이고, 공장대상(工場對象)은 양돈(養豚) 및 양계용(養鷄用) 사료공장(飼料工場)(1일 8시간 작업(作業), 1일 16시간 작업(作業)과 유우용(乳牛用) 펠릿 사료공장(飼料工場)(1일 8시간 작업(作業))이었다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.4
• /
• pp.403-410
• /
• 2017

With the growing importance of GHG reduction, wood pellets are considered as a cheaper renewable energy and carbon neutral. On the other hand, there is a concern that the burning wood pellets may release even more air pollutants such as CO and VOCs. In this study, we analyzed the social costs of burning fuels including wood pellets and coals based on the unit calorific value. The social costs were calculated by sum of the import costs of the fuels and the emission costs of the air pollutants. The results showed that wood pellets are inferior to coals in the aspect of the social costs. It is necessary to improve the quality of the wood pellets and pellet boiler facilities for being used eco-friendly energy sources in the future. We suggest that the control facilities of CO and VOCs should be installed, if the control costs are lower than the pollution costs.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.17-25
• /
• 2009

세계의 모든 나라가 화석연료를 대체하는 태양광, 풍력 등의 그린에너지 기술개발에 주력하고 있으며, 한편으로는 에너지의 효율제고 및 재생을 위하여 폐기물로부터의 자원순환을 이룩하는 폐기에너지 회수에도 많은 노력을 기울이고 있다. 그 하나의 방편이 버려지는 쓰레기에서 에너지를 회수하는 고형재생연료인 RDF(생활폐기물 고형연료 제품, Refuse Derived Fuel) 생산이다. 우리나라에서는 유일하게 강원도 원주시에서 하루 80톤을 생산하고 있으며 아직은 기술도입 초기단계에 있는 가연성폐기물의 연료화 기술이다. RDF의 특성은 불연성 성분이 제거된 일반 가연물을 분쇄하여 압출성형 가공한 펠릿형상의 고체연료로서의 열적 특성이 우수하나 화재안전 측면에서는 제조 및 취급공정에서의 일반적인 가연물 화재위험성을 가지고 있고, 저장과정에서는 축열발열에 의한 자연발화 위험성이 상존하며, 저장형태, 특히 사이로의 경우 구조특성으로 인하여 화재진압도 쉽지않다. 본 논문에서는 일본의 RDF 화재사례를 중심으로 그 화재 위험 특성과 안전대책을 고찰하고자 한다.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.243-249
• /
• 2011

In the world, burning fossil fuels such as oil, petroleum, gasoline has created the global warming due to especially carbon dioxide gas emission. Therefore, these fossil fuels must be replaced by eco-friendly feadstocks. The wood pellets are one of valuable alternative fuels that can replace oil-based fuels within a short period of time. Unfortunately, there are no enough forest biomass for wood pellets in Korea. Nevertheless, Korea government has been trying to use most of forest biomass generated from the National Forest Management Operation. This does not make sense in an economic point of view.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.289-296
• /
• 2011

Recently, much of forest biomass has been obtained from the national forest management operation. Unfortunately, Korean Forest Services has a plan to use this forest biomass as energy fuels for wood pellets. Considering unhappy situation that about 80% of wood pulps has been imported, it is regarded as unwise decision. If forest biomass can be used to make pulps or other valuable woody products, we are able to double its economic value than the raw materials for wood pellets. In this study, we explored alternative raw materials for wood biomass used to make wood pellets. For this, fresh technology such as torrefaction was applied with the other lignocellulosic biomass.

• Korean Journal of Organic Agriculture
• /
• v.21 no.3
• /
• pp.305-319
• /
• 2013

In this study, it is intended that utilize the LCA (Life Cycle Assessment) method, to evaluate the environmental impact of wood pellet manufacturing facility. As mentioned above, wood pellet manufacturing facility of 20 has produced wood pellets as a raw material sawdust and wood in our country. In this study, in order to feature manufacturing process of wood pellets that resemble almost necessary to analyze evenly size and characteristics of various equipment whether these reasonable, the characteristics of the equipment may be different, the production of 20 places I surveyed the facility one central timber distribution center one large scale most of the equipment.

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.531-547
• /
• 2014

This study analyzed the effect of Greenhouse of wood pellet fuel conversing from Diesel. Analyzed through a life cycle assessment of greenhouse gas emissions of carbon dioxide for the environmental assessment, In evaluation of the Ministry of the Environment, analyzed through the life cycle assessment of carbon dioxide emissions of the greenhouse gas and, In the case of economic evaluation, we analyzed the investment payback period to the total revenue generated by each of the calculated incentive based on the RHI and institutions reduction projects a reduction of costs associated with the reduction of fuel costs.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.10a
• /
• pp.161-162
• /
• 2011

유압동력사용 전제하에, 기계식탈피복을 고려하지 않을 때는 전단방식이 가장 유리함을 알 수 있다. 절단방식은 전단방식에 비해서 낮은 생산성이 단점이나, 높은 원형도의 연료봉 절단면이 요구되거나, 비산에 의한 칩 분리, 쿨링(cooling) 장치를 보완하면 절단방식이 유리하다. 또한 수평식 슬릿장치는 커팅 블레이드의 낮은 내구성으로 생산성이 낮은 것이 단점이나 내구성이 강한 공구를 사용하여 처리 속도를 향상한다는 전제에서 실험적 검증의 확보, 그리고 별도의 복잡한 펠릿/헐 분리장치를 보완하면 수평식 슬릿 방식이 유리하다.