• Transactions of The Korea Fluid Power Systems Society
• /
• v.3 no.4
• /
• pp.1-7
• /
• 2006

A water hydraulic pump is likely to have serious problems of high leakage, friction and low energy efficiency. A water hydraulic pump has commonly a fixed displacement type and its outlet flow is adjusted by controlling rotation speed of the pump, which can be implemented by using an electric inverter. This study aims to investigate energy efficiency of the water hydraulic pump system which is driven by an electric inverter. The study is based on the experimental results. The pump which is used in the study shows relatively good efficiency and low leakage, low friction as well. The reasons for the good performance of pump is also investigated.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.106-113
• /
• 2016

Ultra-high pressure positive displacement pump can discharge high pressure water with mass volume, which depends on periodic changes in volume that made by rotation motor. Its high efficiency of discharge is one of the most strong point of positive displacement pump. Due to its simple system structure, it can be miniaturized and lightened. Positive displacement pump can discharge high pressure with stable flow rate, irrespective of pressure fluctuate. This is the reason that positive displacement pump was used instead of centrifugal pump. In this study, shutoff operating system was developed for positive displacement pump to secure safety of high pressure operate. This shutoff system contains controller system, electronic clutch, and relief valve, and each part is mutual supplementation. Speed test was carried out in order to check operation of controller program and electronic clutch and fluid flow, venting experiment of the relief valve. It was confirmed that segment system of ultra-high pressure positive displacement pump is operated.

• Fire Science and Engineering
• /
• v.30 no.1
• /
• pp.104-110
• /
• 2016

Positive displacement pumps with high pressure and water capacity are used large fires in various high-rise buildings. This study provides information for a performance approval standard of fire pumps for fire trucks based on centrifugal pump standards enacted in 2012. An experiment was conducted with a positive displacement pump for three levels of performance from the approval standard (V-1, 2, and 3). The efficiency of the pump was included in the reference, which requires the approval of 65% performance, the same as a centrifugal pump. The water pressure is between 1.5 and 2.5 MPa, and the required flow rate was established as at least $0.31m^3/min$ and up to $3.0m^3/min$. A relief valve was added to adjust the shut-off pressure due to the structural characteristics of the positive displacement pump. A strainer was also installed to prevent damage to the inside of the pump due to foreign matter. However, the strainer includes a difference from the positive displacement pump to operate without a vacuum pump and the centrifugal pump. This is due to the additional approval standard portion of the positive displacement pump, which is expected to be selected for more variety of fire-fighting equipment and proactive responses to fire suppression in a high-rise buildings and large fires. In conclusion, this approval standard was enacted in January 2016.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1043-1044
• /
• 2012

• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.15-22
• /
• 2024

The objective of this study was to examine whether a gerotor pump used in a transmission could be converted into an electric vehicle thermal management system pump using a virtual design environment. To achieve this objective, we first built an environment that could analyze the performance of a gerotor pump in heat transfer fluid. Flow rate, pressure, and volumetric efficiency were then analyzed when using heat transfer fluid in a gerotor pump. Finally, how large the displacement volume of the pump should be designed when using a heat transfer fluid other than oil was determined. Based on results of this study, it is expected that gerotor pumps will be applied to new business fields such as electric vehicle cooling systems.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.121-124
• /
• 2012

오늘날 급속한 산업사회 및 환경변화로 인하여 불특정 다수인들이 생활하는 공간들이 고층화 및 대형화가 가속되면서 여러 가지 문제점들이 나타나고 있으며, 그중 특히 소방안전에 있어서 현실을 만족하지 못하는 부분이 적지 않다. 이러한 문제점들을 보완하기 위하여 소방장비에 적용되어지는 소방펌프의 문제점들을 보완하고 이를 적극 활용하여 새로운 소화체계의 개선과 장비 운영의 효율화를 기하고자 하며, 앞서 연구 개발된 회전용적형 펌프에 기동성과 다양성을 접목하여 기존의 소방시스템에 적극 활용하고자 한다. 그간 법적인 문제로 인하여 원심펌프 이외의 펌프를 소방장비에 적용하기에는 현실적으로 적지 않은 어려움이 있었다. 전술한 문제점을 보완하여 기동성과 접근성을 도출하여 초기화재에 보다 효과적으로 대응하는 소방장비의 접목 가능성을 제시하고자 한다.

• 기계와재료
• /
• v.24 no.2
• /
• pp.110-121
• /
• 2012

유압식 무단변속기(HCVT : Hydraulic Type Continuous Variable Transmission)는 유압펌프와 유압모터의 용적변화에 의하여 무단변속이 이루어지므로 내부구조가 간단하고 변속충격도 거의 없다. 그리고 유압펌프와 유압모터는 작동압력을 높임으로써 출력비와 토크를 크게 향상시킬 수 있다. 그러나 기존 변속기에 비하여 콤팩트한 장점은 있지만 동력전달효율이 다소 떨어진다. 그리하여 연비보다는 한정된 공간, 기동력, 그리고 고출력을 요구하는 중 대형차량의 차세대 변속기로 널리 활용된다. 본 연구에서는 선진국의 무단변속기에 대한 연구동향을 정리하고 국내에서 연구 개발이 진행되고 있는 유압식 무단변속기의 작동원리, 기계장치의 내부구조, 그리고 유압장치의 변속기능을 소개한다. 또한 기계동력전달과 유압동력전달에 관련된 수식들을 유도하고 다양한 동력조건에서 시뮬레이션을 수행하여 유압식 무단변속기의 내 외부에서 생성되는 토크, 속도, 동력 등의 각종 물리량들을 분석한다. 이러한 정보들은 구성부품들의 선정 및 설계에 유용한 자료로 활용된다.