• 전기의세계
• /
• v.39 no.9
• /
• pp.35-38
• /
• 1990

전자펌프(Electromagnetic)는 액체금속의 도전성을 이용하는 것으로 종래의 기계식에 비해 회전부가 없고 기밀을 요하는 패킹장치 등이 없어 보수가 필요없을 뿐 아니라 동작시 유도전압 조정기를 이용하여 유량제어를 쉽게 할 수 있는 등 많은 장점이 있다. 따라서 신뢰성과 안전성이 요구되는 고속증식로, 인공위성과 같이 액체금속을 냉각재로 사용한는 시스템의 펌프에는 물론 알루미늄, 납, 수은 등과 같이 산업계에서 많이 쓰이는 용융금속의 수송에도 대단히 중요한 장치이다. 그러나 전자펌프는 구조상 2차측(액체금속)과 펌프닥트등에서의 손실이 대단히 클 뿐 아니라 전자펌프의 이용 특성상 높은 온도에서 사용해야 하므로 절연 및 내열재료 특성에도 아직 연구되어야 할 과제가 많다. 본 난에서는 이러한 관점에 입각하여 전자펌프의 기본원리를 기술하고 국내외의 연구현황 및 전망을 고찰하여 보고자 한다.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.205-211
• /
• 2001

We propose a constant inversion black box model of erbium-doped fiber amplifiers (EDFAs) for exact performance predictions for EDFAs operated in the gain-flattened condition. The validity of the newly proposed model was experimentally verified by predicting the performance of EDFAs for the L band, within 1.9% required pump power discrepancy. The role of ion pairing effects on the power conversion efficiency is also discussed. ussed.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.54-60
• /
• 2002

A mini turbo-pump having 44mm diameter impeller for hydraulic power control have been tested to evaluate hydraulic performance and losses. The characteristics of the losses such as mechanical, friction, balancing rib losses were investigated. The investigation revealed that the friction loss is relatively large but the balancing rib loss small. It was found that the hydraulic efficiency of the pump at design point is very low($27\%$) due to low specific speed and large friction losses. A computational fluid dynamics(CFD) method also has been utilized for performance prediction of the mini turbo-pump to compare the computed results with the test data.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.6
• /
• pp.286-292
• /
• 2007

The dominant source of noise in a sea-connected piping system is usually due to a seawater cooling pump which circulates seawater to operate onboard equipments normally, and so its water-borne noise with some tonal frequencies should be reduced using proper silencers. In order to obtain the transmission loss of water-borne noise silencers experimentally the present paper suggests a transfer function technique that acoustic wave in the piping system is decomposed into its incident and transmitted components when the reflection at the termination of the system exists. Good agreement in the interested frequency range with theory and the proposed technique shows the validity of the technique.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.71-72
• /
• 2012

본 논문은 승압형 플라이백 컨버터에 탭을 내어 절연형 스위치드 커패시터셀과 차지펌프를 추가한 새로운 토폴로지의 컨버터를 제안한다. 제안하는 회로는 차지펌프를 추가한 스위치드 커패시터 셀의 출력과 플라이백의 출력을 직렬 연결하여 기존의 스위치드 커패시터 플라이백 컨버터보다 고승압에 유리하다. 또한 3차권선이 아닌 탭을내어 사용함에 있어 결합계수의 손실이 적어 고효율의 전력전달이 가능하다. 제안된 회로의 동작원리를 설명하였고 80W급 하드웨어 프로토 타입을 이용하여 검증하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1629-1638
• /
• 1990

Using a 1/10 scale model pump, which is designed and manufactured to simulate two phase performance of reactor coolant pump of Y.G.N

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.99-100
• /
• 2015

본 논문에서는 연속모드로 동작하는 차지펌프가 적용된 부스트 플라이백 셀 밸런싱 회로의 권선비에 따른 효율을 다룬다. 기존의 플라이백 보다 승압 시 적은 권선비를 사용하기 때문에 효율이 좋은 차지펌프가 적용된 부스트 플라이백 셀 밸런싱 회로에서 권선비에 따른 전력 손실을 예상함으로써 전력 효율을 가장 높게 하는 권선비를 선택 할 수 있다. 제안된 회로의 동작원리를 설명하고 82w 하드웨어로 설계를 하여서 검증하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1572-1583
• /
• 1993

This paper deals with the analysis method of regenerator characteristics for designing a vuilleumier heat pump. First, models for evaluating the reheat and the flow losses are established by the comparative study between already proposed ones. Calculations based on the second-order method are performed for the well-known schulz heat pump. Results show that operating conditions as well as design parameters significantly affect the regenerator performances. The effects of operating conditions on the reheat and the flow losses appear to be similar in trends in both the hot-warm and the cold-warm regenerators. However, the losses in the one regenerator vary oppositely to those in the other with specific design parameters such as the phase angle and the swept volume ratio being changed. Also, it is confirmed that there is an optimum aspect ratio(D/L) which minimizes total loss for each regenerator.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.52-59
• /
• 2013

It was described the measured friction loss depending on pressure used and changes in water flow rates for a fire hose used at a fire scene on this study. As a result of actual measurement based on the result obtained by analyzing the use situation of a fire hose such as the kind, quantity, pressure used, etc. of a fire hose, the friction loss in a fire hose under the condition of using by a fire officer at a fire scene was measured as up to 56.8 %. This is much different from the equivalent length of a fire hose used to calculate the pump head in an indoor and outdoor fire-fighting facility. There is no related restrictive regulation on friction loss, there are even no data on friction loss measured by fire hose makers, and spreading a fire hose without considering friction loss at a fire scene can result in an increased length of hose used and a high-pressure water discharge from a fire engine, so this study aims to establish a standard for an equivalent length to friction loss in a fire hose and to propose a spreading method considering friction loss in a fire hose at a fire scene.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.16 no.6
• /
• pp.542-549
• /
• 1987

중요한 기본을 요약하고 엑서지를 에너지 변환에서 가장 중요한 기본 과정에 응용하는 열전달 문제를 제시한다. 열전달로 인한 엑서지 손실과 고온체, 저온체의 단열, 열교환기의 설계와 관련된 결과를 논의한다. 또한 비아제오트로픽(non-azeotropic) 혼합물을 응용한 열펌프 열교환기에서의 엑서지 절약에 대한 연구를 설명한다. 열전달과 압력강하로 인한 손실의 합인 총엑서지 손실이 최소로 되는 최적의 Reymolds 수가 존재함을 보여준다.