• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2018

In this study, ray-tracing software was used to calculate the optical path length of an optical system. Using the optical path length, the optical phase, group delay (GD), group delay dispersion (GDD), and third-order dispersion (TOD) of the optical system were obtained. Pulse compressors using a prism pair or grating pair were designed to compensate the GDD of a real optical system for a femtosecond fiber laser. Also, a pulse stretcher using a grating pair with lenses or mirrors was designed. The results of this study can be used to calculate the dispersion of an optical system and optimize the performance of an ultrashort pulse laser optical system.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.218-219
• /
• 2005

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.93-98
• /
• 2003

With the improvement of digital signal processors, digital pulse compressor(DPC) is widely used in radar systems. The DPC can be implemented by using FIR filter algorithm in time domain or FFT algorithm in frequency domain. This paper designs an expansible DPC using multiple DSPs. With ADSP-21060 of Analog Devices Inc., the computation time as a function of the number of received range cells and FIR filter tap is compared and analyzed in time domain using C-language and assembly language. therefore, when radar system parameters are determined, the number of DSP's required to implement DPC can be easily estimated.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.397-400
• /
• 2006

본 논문에서는 DSP를 이용하여 코히어런트 레이더에 사용될 수 있는 확장성이 용이한 디지털 펄스 압축기를 시간영역에서 설계하고 그 내용을 분석하였다. 수신 거리 셀 및 FIR 필터 탭(tap) 수에 따른 펄스압축 연산시간을 ADSP21060을 사용하여서 분석함으로써, 설계하고자하는 레이더 시스템 요구 파라미터 들이 정해지는 경우 펄스압축기 구성에 소요되는 DSP의 수행 기능과 소요 수를 쉽게 예측할 수 있도록 운용특성을 분석하였다.

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.39-46
• /
• 2004

This paper presents the realization schemes for a multipurpose coherent mono-pulse radar Simulator with extendable features. We developed and installed the TSG(Timing Signal Generator) board which can simulate a mechanically rotate signal of antenna, an operation timing signal of pulse radar and target signal, to operate the simulator without real target in the indoor environment. Also, with the insertion of the radar signal processor, it came to be easy to achieve the addition of radar function algorithms, to rebuild or extend the multi-DSP Architecture into the simulator. Throughout the simulation results, we verified that the designed coherent mono-pulse radar simulator can exactly display a moving target on the realistic monitor(RD 9800).

• Korean Journal of Optics and Photonics
• /
• v.2 no.4
• /
• pp.197-202
• /
• 1991

The real time autocorrelator has been developed in order to measure the pulse widths of ultrashort laser pulses using the SHG method. The scanning range of the autocorrelator is 142 ps, and inserting a delay block in one arm of the autocorrelator, the scanning range can be extended to 250 ps. The shortest pulse width was measured to be 20 ps, when the cavity length was well matched to the RF frequency of the mode-locker, and broadened to be 39 ps and 47 ps as the cavity length was detuned.

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.503-506
• /
• 2001

When DC voltages from 5 V up to 90 V are applied to a transmitter chip excited by an ultrafast lacer beam, the terahertz electromagnetic pulses and their spectra are changed. The spectrum shifts to the high frequency range when the high DC voltage is applied to the chip. At that time, the signal-to-noise ratio is increased from 250: 1 to 10,000: 1. The spectrum can expand up to 4 THz by optimal realignment of the THz system. Also, two terahertz electromagnetic pulses are generated from a receiver chip when the laser detection beam is reflected to the back side of the chip.

• Journal of the Korean Magnetics Society
• /
• v.14 no.2
• /
• pp.65-70
• /
• 2004

Read out signal and temperature distribution of magnetic amplifying magnetooptical disk were studied. Temperature distribution of recording layer and adjacent layers were calculated when the disk was at rest. Mark size, length and location were simulated from a chain of recording beam pulses. In addition, signal amplitude depending on the shape of the marks, readout signals from the recording layer and amplified marks of the readout layer, were simulated. Simplified thermal conduction model was used to calculate the temperature distribution of recording and adjacent layers as a function of time as well as to calculate the mark size, length and location. Readout signal was calculated by the convolution of the disk reflectivity and the Gaussian beam intensity. Readout signal from the mark in the readout layer amplified to the size of the laser beam fumed out to be twice as large as the signal from the crescent shaped mark in the recording layer.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.366-367
• /
• 2011

대화면 PDP 서스테인 파워 모듈을 위한 고효율 펄스폭 변조 컨버터가 본 논문에서 소개된다. 제안된 컨버터는 일차측에서 병렬로 연결되고, 위상 변조 방식으로 구동되는 두 개의 하프브릿지 컨버터로 구성되어 있다. 그들의 변압기들은 이차측에서 직렬로 연결된다. 제안된 컨버터에서 모든 스위치들은 그 전부하 구간동안 ZVS를 가지고 턴 온되며, 동시에 그 ZVS 범위를 확장하기 위해 추가된 전류에 의한 도통 손실을 최소화 할 수 있는 장점을 갖는다. 또한 그 변압기의 턴 비가 비교되는 컨버터들에 비해 유리하게 설계될 수 있어 일차측 도통 손실을 개선할 수 있는 장점도 갖는다. 낮은 프로파일 설계 또한 두개의 변압기의 사용으로 달성된다. 제안된 컨버터의 성능은 80인치 PDP 서스테인 파워 모듈의 스펙으로 구현된 프로토타입 컨버터들부터 검증된다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.373-376
• /
• 2008

본 논문은 퍼지 펄스 폭 변조 (Pulse-width-modulation: PWM) 시스템의 안정도에 대해 다루게 된다. 복잡성을 가진 비선형 시스템은 Takagi-Sugeno (T-S) 퍼지 모델에 의해 효율적으로 논의될 수 있다. 본 논문에서는 기존의 LTI 시스템에서 논의 되었던 PWM 제어기 설계 문제를 퍼지 시스템으로 확장시킴으로써 PWM 제어기에 대한 논의의 저변을 확대시키고자 한다. 또한, 리아푸노프 (Lyapunov) 안정도에 기반 한 안정도 증명을 통해 퍼지 PWM 시스템의 안정도를 분석하고자 한다.