• Korean Journal of Organic Agriculture
• /
• v.27 no.3
• /
• pp.341-351
• /
• 2019

Gynura procumbens (Family Asteraceae) is a medicinal plant commonly found in tropical Asia countries such as China, Thailand, Indonesia, Malaysia, and Vietnam. Traditionally, it is widely used in many different countries for the treatment of a wide variety of health ailments such as kidney discomfort, rheumatism, diabetes mellitus, constipation, and hypertension. The objective of this study was to select the natural growth media for hydroponic cultivation of Gynura procumbens. The commercially available thirty four different organic nutrient solutions were analyzed for growing Gynura procumbens. After analysis, two organic nutrient solution were selected, mixed (pH 5.5~6.5 / EC 0.5~1.0 ds/m) and then used as organic fertilizers. Thirty day old seedlings were planted and the environmental conditions of the rhizosphere were also examined to select the natural media composition. The minimum temperature of rhizosphere by type of natural media was highest in cocopeat media and lowest in perlite media. Furthermore, plant growth was examined from 50 days old seedlings, and vermiculite was observed to be most effective and perlite was the least effective component as natural media. The total polyphenol content of the studied plant material was also higher in vermiculite in comparison to other growth media. The Gynura procumbens yields were also higher in vermiculite in comparison to other growth media. Thus, vermiculite can be used to improve Gynura procumbens plant growth as a natural growth media.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.886-897
• /
• 2016

The physical properties of rooting media for the establishment of plugs in a greenhouse are modified according to variations in the greenhouse environment throughout the season. In this study, we established a standard for rooting media for the production of plug seedlings for each growing season (summer, winter and spring fall). Eight types of peatmoss (PM) and 4 types of perlite (PL) commonly used in Korea were collected and blended with the ratio of 7 parts PM to 3 parts PL (v/v) to make 32 different rooting media blends. We determined the total porosity (TP), container capacity (CC), air-filled porosity (AFP), pH, and electrical conductivity (EC) of the 32 media blends, and 6 media blends were selected for seasonal use. We also conducted additional analyses for plant easily available water (EAW), buffering water (BW), cation exchange capacity (CEC), and nutrient contents in the 6 media blends. The TP, CC, and AFP of the 32 media blends ranged from 64.7 to 96.0%, 42.9 to 90.1%, and 1.3 to 27.8%, respectively, indicating that the physical properties were strongly influenced by the type of PM and PL. The pH and EC of the PMs ranged from 2.96 to 3.81 and 0.08 to $0.47dS{\cdot}m^{-1}$, respectively. However, after blending the PM with the PL the pH was raised and the EC was lowered The media blends selected for the summer growing season were Blonde Golden peatmoss (BG) + No. 1 perlite size < 1 mm (PE1) and Latagro 0-10 mm (L1) + No. 2 perlite size 1-2 mm (PE2). These two media blends had 89.8-90.9% of TP, 80.8-81.3% of CC, and 9.0-9.7% of AFP. The media blends selected for the winter growing season were Sfagnumi Turvas (ST) + PE2 and Latagro 20-40 mm (L3) + PE2. These media blends had 79.9-86.7% of TP, 60.4-74.9% of CC, and 11.8-19.6% of AFP. The TP, CC, and AFP of two media blends, BG + No.3 perlite 2-5 mm (PE3) and Orange peatmoss (O) + PE3, selected for the spring and fall growing seasons, respectively, were 85.2-87.3%, 77.9%, and 7.4-9.4%, respectively. The percentage of EAW of the media blends selected for the spring, summer, and winter growing seasons ranged from 24.2-24.9%, 22.0-28.6%, and 18.0-21.8%, respectively, but the percentages of BW were not significantly different among the selected root media blends. The pH, EC, and CEC of the 6 selected media blends ranged from 3.11-3.97, $0.06-0.26dS{\cdot}m^{-1}$, and $97-119meq{\cdot}100g^{-1}$, respectively.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.69-75
• /
• 2000

The object of the research is to estimate for pearlite structure of quenched carbon steels. The effects of temperature on physical properties metallic structures and the latent heat by phase transformation were considered. In this study a set of constitutive equations relevant to the analysis of thermo-elasto plastic materials with pearlite phase transformation during quenching process way presented on the basis of continuum thermo-dynamics. The iso-thermal transformation curve of the SM50C was formlated by cubic spline curve. The formulated equations of evolution in pearlite transformation was used for structure analysis. The volume fraction of pearlite was obtained from the results of calculated metallic structure by Finite element equation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.93-96
• /
• 2004

This paper presents a study on defects in pearlite lamella structure of high carbon steel by means of finite-element method(FEM) simulation. High-carbon pearlite steel wire is characterized by its nano-sized microstructure feature of alternation ferrite and cementite. The likely fatigue crack is located on interface of the lamella structure where the maximum amplitude of the longitudinal shear stress and transverse shear stress was calculated during cyclic loading. The FEM is proposed for maximum shear stress from loading of lamella structure, and a method is predicted to analyze the likely fatigue crack generation. It is possible to obtain the important basic data which can be guaranteed in the ductility of high carbon steel wire by using FEM simulation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.165-166
• /
• 2018

Researches for the development of renewable energy as a fuel substitute for global warming and depletion of petroleum resources are actively being carried out. Among them, the annual growth rate of PV generation is 20.73%, which is higher than other renewable energy sources. However, the production of 1 ton of polysilicon, which is known as a raw material for solar power generation panels, generates 2 tons of waste. As the demand for PV panels increases, the problem of the treatment of polysilicon sludge is attracting attention, and studies on the utilization of polysilicon sludge are needed. Therefore, in this study, the applicability of polysilicon sludge treated as industrial waste to the lightweight panel for architectural purposes was examined.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.156-157
• /
• 2015

Recently, the trend for structure is being changed from wall construction to rhamen construction. rhgamen construction reduces floor noise and selfweight in structures. The amount of lightweight panels used in rhamen construction is also increasing. Also, Worldwide refinery industry is a large amount of sulfur is produced by develrop ment. Sulfur is resistant to freezing and thawing. Terefore, this study focuses on the density and absorption of magnesium oxide matrix that contains wood powder and pearlite to replace lightweight panel for rhamen construction. Adding pearlite 15% has the lowest density but, it has the highest absorption.

• Horticultural Science & Technology
• /
• v.18 no.6
• /
• pp.819-822
• /
• 2000

This study was conducted to determine the optimum rooting media composition for the production of high-quality rose cuttings. The percentage of rooting was highest in peatmoss (P) and coarse vermiculite (CV) mixture (1:2, v/v). In 'Little Mable' and 'Suplesse', the rate was above 95%, and 'Red Velvet', 'Noblesse', 'Rote Rose', and 'Sweetness' showed 100% rooting rate. 'Rote Rose' showed lowest rooting rate, but in the composition, the rate was 100%. In the composition, root growth was accelerated. Root number, root weight, and root diameter increased in P:CV (1:2) mixture. However, root length increased in peatmoss and perlite mixture (1:2). This results might be caused by the water holding capacity and porosity of the rooting media composition.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.6 s.107
• /
• pp.103-108
• /
• 2005

It was aimed to promote as a material for interior landscape by validating Rumohra aristata, in an indoor environment, especially irrigation interval, medium composition and drainage at indoor. 1. The result of physico-chemical analysis of medium composition showed that porosity, pH and Ex-Ca, Ex-Mg and Ex-K were high with peatmoss: vermiculite: perlite(1:1:1) and water contents, organic matter content, total nitrogen and cation exchange capacity were high with sand: leaf mold(1:1). 2. Growth and indoor adaptability of Rumohra aristata were better with irrigation at 2 interval per week than irrigation at 7 interval per week regardless of drainage. 3. In the case of medium composition, of growth and indoor adaptability were higher with sud: leaf mold (1:1) than peatmoss: vermiculite: perlite(1:1:1). 4. Fronds fresh weight and dry weight decreased when irrigation interval increased and were higher with sand: leaf mold(1:1) than peatmoss: vermiculite: perlite(1:1:1) treatment.

• Journal of Korea Foundry Society
• /
• v.42 no.1
• /
• pp.49-60
• /
• 2022

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.316-325
• /
• 2009

Adequate conditions of water content and aeration of container media are major environmental factors in the production of pot plant. This experiment was carried out to find optimum physical property of media for the production of small potted Ardisia in capillary mat irrigation system. The plant materials used in this experiment were Ardisia pusilla and Ardisia japonica. Seven substrates were formulated by blending perlite or fresh rice hulls at 20%, 40%, 60% (v/v) with sphagnum peat. Total pore space (TPS) increased by blending sphagnum peat with fresh rice hulls, but decreased by blending sphagnum peat with perlite. As fresh rice hull (FRH) and perlite content increased, air filled pore space (AFP) of substrate increased but container capacity (CC) decreased. Substrate blended with fresh rice hull was higher AFP than blended with perlite and the rate of increase was higher for FRH-containing substrate. As AFP increased, the $CO_2$ concentration in the pot decreased and the $CO_2$ concentration of substrate blended with FRH was higher than blended with perlite. The fresh and dry weight of Ardisia pusilla and A. japonica was the highest in the substrate contained 60% FRH, but the ratio of shoot dry weight to root dry weight was the lowest. The optimum total pore space, air-filled pore space, water holding capacity of substrate for the growth of Ardisia pusilla and A. japonica in the capillary mat irrigation system were 82.8%, 25.6%, and 57.2% respectively.