• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.166-174
• /
• 1993

Abstract The crack resistance of PSG(Phosphosilicate Glass) and PE-SiN(Plasma Enhanced CVD S${i_2}{N_4}$)films deposited on aluminium thin films on Si substrate was analyzed in this study. PSG was deposited by AP-CVD and PE- SiN by PE-CVD. All the films underwent repeated heat cycles at 45$0^{\circ}C$for 30 min. Crack formation and development were examined between each heat cycle. The crack behavior was found to be closely related to the stresses in the films. The stress induced by the difference in thermal expansion behavior between the passivation layers and underlying aluminum film may cause the crack. Crack resistance decreases as the thickness of PSG films increases due to the high tensile stress of the films. Phosphorus in the PSG films releases tensile stress and consequently the stress of the films tends to show compressive stress. As a result, crack resistance increased as the concentratin of P in the PSG films increased. Crack resistance in the PE-SiN films also increased with compressive stress. An experimental model to predict crack generation in the PSG and PE-SiN films during heat cycle was suggested.

• Journal of the Korean Geographical Society
• /
• v.31 no.1
• /
• pp.68-87
• /
• 1996

This paper investigates spatio-temporal changes in the international system of linkages among multinational corporate domestic decision-making centers and their overseas subsidiary centers for the period 1974-1991. During this period advances in information technologies and an ever increasing interdependent world economy have permitted the globalization of resource transfers, production techniques, service provision and financial transactions. Based on a network theory of internationalization, the study idenifies the dispersion of multinational control centers and the diversification of their linkage patterns. These tendencies are led by small and medium sized quaternary places as well as the rapid growth of service industries. Corporate headquarters cease to be tied together to big corporate and governmental centers but will disperse over time at global, national and regional level. Using information statistics, this paper confirms the dispersion patterns of capital flows and diversification of multinational control linkages. With an increasing trend toward a multicentric world system and the associated diecline of the global hegemony of a small number of largest cities, multinational control linkages should continue to disperse.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.845-852
• /
• 2007

An OWC-type Wave Energy Conversion passes through 3 steps energy conversion process. This paper deal with the impulse turbine with staggered blade to improved performance by numerical analysis using commercial CFD code, FLUENT Maximum value of axial airflow velocity during exhalation is higher than that during inhalation This paper deal with special-type of Impulse Turbine so-called "Staggered Blade" for more efficiency to making air flow direct to on pressure side. Also, this paper has proposed special-type turbine with self-pitched blade more efficient.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.289-293
• /
• 2010

21C 현대 문명사회에서는 도시의 고밀도 및 팽창으로 인하여 도시 내 생태계가 파괴되면서 생물서식처의 환경 악화 및 엄청난 감소가 초래되었으며, 그 결과로 인하여 인간과 생물이 접촉할 수 있는 공간이 현저하게 줄어들고 있다. 또한 도시 영역의 확장을 위하여 산림 및 녹지의 감소, 녹지의 분절 및 단절화, 해안 매립 등이 계획 없이 무분별하게 진행됨으로써, 각종 동식물의 개체 수 감소 및 토양의 건조화 등이 발생하고 있으며, 그 영향으로 생물종의 다양성이 떨어지고, 도시 생태계의 교란이 심해지고 있다. 이러한 도시 생태계의 교란은 도시에 거주하고 있는 시민들의 생활의 질이 떨어지게 하고 많은 환경 문제들의 주원인이 되고 있다. 지속적이면서도 자연친화적인 도시발전을 위해서는 도시 내 자연생태계를 회복하고 생물서식공간을 종합적으로 보전하면서 복원해야 한다는 요구가 높아지고 있지만, 이를 체계적으로 이루기 위한 방법론의 부재에 시달리고 있었다. 이러한 가운데 유럽을 중심으로 생겨난 비오톱(Biotope)과 비오톱 지도화 방법이 생태계를 보전하며, 시민들에게 다양한 자연체험과 휴양 기회를 제공하고 친환경적인 도시계획을 위한 핵심적인 역할을 하는 것으로 인식되고 있다. 하지만, 기존의 비오톱 지도는 이미지 기반의 2차원 지도로 제공되고 있어, 거리 및 공간 분석에 취약하고 정보전달력이 부족하여, 익숙한 전문가가 아닌 경우 비오톱을 이해하는데 상당한 정도의 시간이 필요하였다. 이에 본 논문에서는 공간정보가 결여된 2차원 형태의 GIS 데이터를 기반으로 3차원 공간 데이터를 자동으로 생성하고, 위성영상과 DEM(Digital Elevation Model)을 이용하여 3차원 지형을 만들어 각 주제도별로 입체적인 분석이 가능하도록 하였다. 또한 동영상 녹화 기능과 3차원 객체 추가 기능을 이용하여, 자연생태계를 고려한 도시의 설계를 진행하는 경우 3차원적인 모델링을 제공함으로써 효과적이면서도 사용자의 이해도를 향상 시킬 수 있는 정보 전달력을 가질 수 있도록 설계 및 구현하였다.

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.207-214
• /
• 1993

Glass-ceramic monoliths with an ultra-low thermal expansion coefficient have been synthesized by the sol-gel technique using metal alkoxides as starting materials and dimethyl formamide as a drying control chemical additive. The ternary gels: $Li_2O\cdot Al_2O_3\cdot 2, 4 or $6SiO_2$ were obtained by hydrolysis and polycondensation reactions of metal alkoxides of silicon, aluminum and lithium. To produce cylindrical crack-free gel monoliths, excess water was used to the starting solutions and drying rates were controlled precisely to prevent cracking. In conversion process ,${\beta}$-eucryptite, $Li_2O\cdot Al_2O_3\cdot 3SiO_2$ and P-spodumene with ,${\beta}$-quartz solid solution phase were obtained by heating at the range of 750 ~$1000^{\circ}C$. Above $800^{\circ}C$, the ,${\beta}$-spodumene phase increased while ,${\beta}$-eucryptite phase decreased. The thermal expansion coefficient of the crystallized specimens were -15~ $+5{\times}{10^{-7}}/{\circ}C$ over the temperature range from room temperature to $600^{\circ}C$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.28-34
• /
• 2019

The thrust control calculation according to the operation of plug nozzle for cold air test and the analysis of the flow characteristics of the pintle shape and operation pressure are performed. The numerical computation was verified by comparing the flow structure and the coefficient of thrust with the experimental data. It was confirmed that the nozzle throat was formed at the design position on each pintle shape, and thrust control up to 1:8 was achieved only by the stroke change. Finally, although the aerospike nozzle is autonomous, it is unfavorable in the under_expansion condition, if it is designed for a very low nozzle pressure ratio.

• The Korean Journal of Applied Statistics
• /
• v.34 no.4
• /
• pp.589-597
• /
• 2021

In simple and multiple regression, there is a difference in the meaning of regression coefficients, and not only are the estimates of regression coefficients different, but they also have different signs. Understanding the relative contribution of explanatory variables in a regression model is an important part of regression analysis. In a standardized regression model, the regression coefficient can be interpreted as the change in the response variable with respect to the standard deviation when the explanatory variable increases by the standard deviation in a situation where the values of the explanatory variables other than the corresponding explanatory variable are fixed. However, the size of the standardized regression coefficient is not a proper measure of the relative importance of each explanatory variable. In this paper, the estimator of the regression coefficient in multiple regression is expressed as a function of the correlation coefficient and the coefficient of determination. Furthermore, it is considered in terms of the effect of an additional explanatory variable and additional increase in the coefficient of determination. We also explore the relationship between estimates of regression coefficients and correlation coefficients in various plots. These results are specifically applied when there are two explanatory variables.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.1-9
• /
• 2022

A design factor analysis was conducted to reduce the thrust reduction in the off-design, due to the driving of the aerospike pintle nozzle. The close (NPR 100) as well as the open (NPR 11) stroke were fixed, as under-expansion conditions. The pintle contour, pintle head radius (R), cowl angle (θ), and cowl exit length (L) were selected as design factors. The change in thrust was analyzed, using a verified numerical analysis technique. First, the pintle head radius and the length of the cowl exit had little influence on the thrust. The cowl angle changed the mass flow rate by affecting the effective nozzle throat area, and created a reverse pressure gradient at the cowl exit. As a result of applying the dual aerospike contour, it was confirmed that the thrust in the design-off increased by approximately 1.2%, compared to the reference case and by approximately 3.4% compared to the worst case.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.1
• /
• pp.1-8
• /
• 2022

This study proposes a penetration model in soil considering the wake separation and reattachment based on the integrated force law (IFL). Rigid body dynamics, the IFL, and semi-empirical resistance function about soil are utilized to formulate the motion of the hard projectile. The model can predict the trajectory in soil considering the spherical cavity expansion phenomenon under various oblique angles and angles of attack (AOA). The Mohr-Coulomb yield model is utilized as the resistance function of the soil. To confirm the feasibility of the proposed model, a comparative study is conducted with experimental results described in the open literature. From the comparative study, the penetration depth estimated from the proposed model had about 13.4% error compared to that of the experimental results. In general, the finite element method is widely used to predict the trajectory in soil for a projectile. However, it takes considerable time to construct the computational model for the projectile and perform the numerical simulation. The proposed model only needs to the dimension of the projectile and can predict the trajectory of the projectile in a few seconds.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.137-149
• /
• 2023

In order to intuitively grasp the earth pressure direction acting on the structure and displacement state, displacement data in the horizontal and vertical directions were processed using the sigmoid function. A displacement coordinate system was set up for each axis. The system can intuitively check the current displacement and assess the management stage of each point. A displacement path can be compiled from continuously recorded points, allowing trends in the displacement's history and stress direction to be known. Analysis of data measured for excavated ground, found that displacement occurred in the direction of destressing at all points, and that the points' management state steady. Similar behavior trends were found among measurement points with high spatial correlation, whereas differing behavior trends occurred among measurement points with low spatial correlation. If the correlation analysis of the precursor and behavior area is performed using the continuously distributed surface settlement data and displacement coordinate system, it will be possible to predict the failure time and area.