• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.6
• /
• pp.475-481
• /
• 2013

The residual stresses occur in the Frequency Selective Surface(FSS) embedded hybrid composite structures after co-curing due to mismatch among the coefficient of thermal expansions and stiffness values between the FSS and composite materials. The spring backs occur due to these residual stresses. Therefore, in this paper, the spring-backs caused by residual stresses in FSS embedded composite structures were studied with considering effect of symmetric and unsymmetric stacking sequence of composite laminates.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.117-128
• /
• 2000

The development of proper joint model, which can describe real phenomena exactly and still can be used easily, is one of the most important element for the analysis of the mechanical and hydraulic behavior of discontinuous rock mass. In this study, an elasto-plastic constitutive model of joint behavior considering asperity degradation was extended with the concept of first and second order asperities. The proposed model was implemented to numerical code with discrete finite joint element. The parametric study with the various asperity angles and degradation coefficients showed that the model can reproduce the shear behavior of typical rough joints well. Results of laboratory monotonic and cyclic shear tests were compared with those of numerical tests to validate the model. The hydraulic model considering the relations between gouge production and aperture was introduced to the mechanical model. In an attempt to examine the performance of the model, comparative numerical test was conducted. Permeability between joint surfaces increased rapidly at the first stage, but became nearly constant with increasing shear displacement due to gouge production and uniform variation of aperture distribution.

• Composites Research
• /
• v.28 no.5
• /
• pp.260-264
• /
• 2015

In this paper, molecular dynamics (MD) simulation was carried to predict thermo-mechanical behaviors for carbon nanotube (CNT) reinforced epoxy composites and to analyze the trends. Total of six models having the volume fractions of CNT from 0 to 25% in epoxy were constructed. To predict thermal behaviors, temperature was increased constantly from 300 to 600 K, and the glass transition temperature ($T_g$) and coefficient of thermal expansion (CTE) analyzed using the relationship between temperature and specific volume. The elastic moduli that represented to the mechanical behaviors were also predicted by constant strain. Additionally, the effects of functionalization of CNT on mechanical behaviors of composite were analyzed. Models were constructed to represent CNTs functionalized by nitrogen doping and COOH groops, and interfacial behaviors and elastic moduli were analyzed. Results showed that the agglomerations of CNTs in epoxy cause by perturbations of thermo-mechanical behaviors, and the functionalization of CNTs improved the interfacial response as well as mechanical properties.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.2
• /
• pp.147-155
• /
• 2004

Anion adsorption properties of organobentonites modified by two cationic polymers, hexadecyltrimmethylammonium (HDTMA) and cetylpyridinum (CP), were investigated. The organobentonites showed the significant expansion of basal spacing to 42.0 $\AA$ at room temperature. The adsorption experiments were conducted for the 0.2 g of organobentonites with 40 mL solutions of various concentrations of anions such as nitrate, sulfate and phosphate. As a result, the organobentonites showed excellent adsorption capacities for those anions whereas untreated bentonite showed very low adsorption capacity. Adsorption rate of HDTMA-bentonite was about 90% for 100 mg/L solutions of nitrate and phosphate, and that of CP-bentonite was 97% for 100 mg/L solution of nitrate. Adsorption behaviors were slightly different for the different organobentonites and anions. Both organobentonites showed relatively higher adsorption rate for nitrate and phosphate than sulfate. Therefore, these organobentonites showing high anion adsorption capacities can be used far the removal of deleterious anions in the treatment of environmental pollution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.3
• /
• pp.210-215
• /
• 2002

In this study, the computer program called Multi_Cycle, which simulates the steady-state performance (coefficient of performance, capacity, power consumption and etc.) of multi- airconditioning systems using R410A, was developed. In order to validate the simulation program, a series of case studies were carried out. The Multi_Cycle consists of several subroutines for simulating indoor units. outdoor unit, compressor, and expansion devices. and for estimating the thermodynamic and transport properties of the refrigerants and moist air. It would appear to be advantageous to use the Multi_Cycle for a performance analysis when considering various kinds of refrigerants and the complex operating conditions of each unit making up the multi-airconditioner cycle. Moreover, the Multi_Cycle would seem to be useful tool in optimizing a multi-airconditioning system and establishing economical and efficient operating conditions in the multi-airconditioner cycle. In the present study, the Multi_Cycle was programmed with Digital Visual Fortran for the main simulation code and Visual Basic for- the graphic user interface.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.4
• /
• pp.25-32
• /
• 2016

The two-dimensional (2D) analysis is widely used in geotechnical engineering for slope stability analysis assuming a plane-strain condition. It is implicitly assumed that the slip surface is infinitely wide, and thus three-dimensional (3D) end effects are negligible because of the infinite width of the slide mass. The majority of work on this subject suggests that the 2D factor of safety is conservative (i.e. lower than the 'true' 3D factor of safety). Recently, the 3D finite element method (FEM) became more attractive due to the progress of computational tools including the computer hardware and software. This paper presents the numerical analyses on rotational mode and translational mode slopes using the 2D and 3D FEM as well as 2D limit equilibrium methods (LEM). The results of the parametric study on the slope stability due to mesh size, dilatency angle, boundary conditions, stress history and model dimensions change are analysed. The analysis showed that the factor of safety in 3D analysis is always higher than that in the 2D analysis and the discrepancy of the slope width in W direction on the factor of safety is ignored if the roller type of W direction conditions is applied.

• Korean Security Journal
• /
• no.17
• /
• pp.195-220
• /
• 2008

Various Kinds of social pathology and crimes that threaten our daily safety are on the increase in process of time as a result of the development of science and technology empty of moral sense, Value Confusions, apolaustic tendency, economic and social transformation recently. Moreover the effective provision of police service lies beyond the boundaries of the police organization. Therefore private security personnel have made an effort for safety and protection of group as well as an individual through the introduction of private security industry based on a benefit principle and private security industry is being become complexes utilizing technology as well as high-end devices through various international events. The field of private security industry in Korea is being extended rapidly with expansionism of society and public services but the quality improvement is declining. Furthermore the study of recruit education program for security personnel as the basis of quality improvement is insufficient compared with the study of police service. Consequently, this investigation is going to contribute to development of recruit education program for security personnel through the analysis about difference of each subject usability for education about electronic security and facility guard.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.186-186
• /
• 2011

태양전지의 효율을 증가시키기 위해서는 표면에서의 Fresnel 반사를 줄여 입사된 빛이 흡수층까지 잘 도달되도록 해야 한다. 그러나 결정질 실리콘의 경우, 굴절률이 높아 32% 이상의 표면반사율을 보이고 있어, 실리콘 태양전지 표면에 단일 또는 다중 박막의 무반사 코팅을 통해 반사율을 낮추는 방법이 널리 사용 되어 오고 있었다. 하지만, 이와 같은 코팅 방법은 열적팽창 불일치, 물질 선택의 어려움뿐만 아니라 낮은 반사율을 포함하는 파장 및 빛의 입사각 영역의 제한 등 여러 문제점을 지니고 있다. 이러한 문제점을 보완하기 위해, 표면에 서브파장의 주기를 갖는 나노구조(subwavelength structure, SWS)의 형성에 관한 연구가 활발히 진행되고 있다. 습식 식각보다 건식 식각을 이용한 SWS 제작 방법이 표면 profile을 제어하기 용이하나 패턴 형성을 위해 식각 마스크가 필요하다. 최근, 복잡하고 고가의 전자빔 또는 나노임프린트를 이용한 패턴 형성보다, 간단/저렴하며 대면적 제작이 용이한 금속 나노입자 마스크를 이용한 SWS의 제작에 대한 연구가 활발히 진행되고 있다. 또한 SWS의 무반사 특성은 표면 profile에 따라 크게 영향을 받는다. 따라서 본 실험에서는 열적 응집현상에 의해 형성되는 self-assembled Pt 나노입자 식각 마스크 및 $SiCl_4$가스를 사용한 유도결합 플라즈마(inductively coupled plasma, ICP) 장비를 이용하여 무반사 실리콘 SWS를 제작하였으며, SWS 표면 profile에 따른 구조적 및 무반사 특성을 조사하기 위해 다양한 공정조건을 변화시켰다. 실리콘 기판 위의 Pt 박막은 전자빔 증착(e-beaml evaporation)법을 사용하였고, 급속 열처리(RTA)를 통해 Pt 나노입자의 식각 마스크를 형성시켰다. Pt 나노입자들의 패턴 및 제작된 무반사 실리콘 SWS의 식각 profile은 scanning electron microscope를 사용하여 관찰하였으며, UV-VIR-NIR spectrophotometer를 사용하여 350~1050 nm 파장 영역에서의 반사율을 측정하였다. ICP 식각 조건을 변화시켜 5% 이하의 낮은 반사율을 갖는 높이가 높고 쐐기 형태의 실리콘 SWS를 도출하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.221-221
• /
• 2012

최근 진공 산업은 반도체 산업의 급속한 발전과 더불어 진공 산업이 핵심기술로 부각되고 있으며, 진공 산업의 발전이 고부가가치를 창출하는 산업으로 발전하고 있는 추세이다. 이에 (유)우성진공 기술연구소에서는 국내에서 개발이 전무한 소형급 600l/min. 급의 배기속도를 가지는 공랭식 건식진공펌프 개발과 더불어 중소기업 혁신기술 개발사업의 성공적인 수행으로 인해 상용화 단계에 있다. 본 연구에서는 소형(600l/min. 급) 공랭식 건식진공펌프에 개발 과정 및 성능에 대해 소개하고자 한다. 우선, 여타 건식진공펌프와는 달리 냉각방식이 수냉식이 아니라 공랭식 이라는 점에서 에너지 절감 및 설치 공간 제약이 없으며, 유지 비용을 절감할 수 있는 장점을 가지며, 국내에서는 소형급의 건식진공펌프가 없는 관계로 시장성을 높게 평가하고 있다. 소형급 공랭식 건신진공펌프의 냉각효율을 고려하여 하우징을 알루미늄 합금으로 제작을 하였으며, 냉각핀을 적절하게 배치하여 압축열을 효과적으로 방출하기 위한 구조가 될 수 있도록 설계하였고, 냉각팬에 의한 공랭효과를 극대화하기 위해 펌프 스킨을 사용하여 공기 유로를 형성토록 하였다. 또한, 루츠의 형상 및 각 단의 압축효율을 고려한 최적의 로터를 설계하기 위해 Involute Curve를 이용한 3-Lobe형 로터를 설계하였으며, 로터와 로터간의 Clearance를 유지 할 수 있도록 설계하였다. 향후 최적화된 로터 설계기술과 이형재질(알루미늄과 주철)간 열팽창이 고려된 적절한 clearance 유지기술을 적용하여 안정적인 배기속도 600l/min.와 도달진공도 0.005 torr를 가지는 소형 공랭식 건식드라이펌프를 상용화 하고자 한다. 또한 성공적인 과제 종료 및 기술 개발에 따라 건식진공펌프 시장에 신기술 개발 확산에 따른 기업들 간의 기술 경쟁력 촉진을 통한 국가 기술력 향상을 기대해 볼 수 있다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.3
• /
• pp.169-176
• /
• 2004

The Mechanistic model, considering expansion stress, coefficient of diffusion etc. to time, is applied to predict the deterioration of concrete structures of the nuclear power plant(NPP) due to sulfate attack. Mix design for the test was three kinds of specified compressive strength 385, 280 and $210kgf/cm^2$ which are used to construct NPPs and cement was type I and V. The immersion test was performed with 10% $Na_2SO_4$ solution to cement type and strength for a year. The coefficient of diffusion on each concrete mix is calculated based on the results of immersion test, and it is used for predicting the sulfate attack of the concrete structures of NPP. The coefficient of diffusion of the target concrete ranged $0.5763{\sim}3.9002{\times}10^{-12}m^2/sec.$, and the sulfate attack rate of concrete structures of the NPP was predicted as 0.1~7.1 mm/year.