• Title/Summary/Keyword: 팬의 위치

Search Result 121, Processing Time 0.026 seconds

현장탐방 - (주)백산이엔씨

  • 대한기계설비건설협회
    • 월간 기계설비
    • /
    • s.309
    • /
    • pp.28-37
    • /
    • 2016
  • 관람석에서 바비큐를 먹으며 경기를 보거나 좀더 가까이 선수들을 볼 수 있는 야구장. 탁 트인 구장으로 경기장 밖에서도 선수들과 관중들을 보면서 함께 즐길 수 있는 야구장. 야구팬들이라면 누구나 미국 메이저리그 야구장에서만 볼 수 있는 풍경을 국내에서도 볼 수 있기를 꿈꾸었을 것이다. 최근 그 꿈이 실현됐다. 바로 지난 3월 19일 시범경기 개막전을 치른 '대구삼성라이온즈파크' 야구장이다. 미국 메이저리그 필라델피아 필리스의 홈구장인 '시티즌스뱅크파크'의 모양을 벤치마킹한 '대구삼성라이온즈파크' 야구장은 국내 최초로 팔각형으로 설계돼 넓은 관람공간과 탁 트인 시야가 특징이다. 지난 2012년 12월 첫 삽을 뜬 후 40여 개월 만에 총사업비 1,666억원을 투입해 지난 3월 완공되었다. '대구삼성라이온즈파크'는 야구 명문인 대구 경북의 자긍심과 함께 대구의 새로운 랜드마크로 자리매김하며 도시브랜드 향상과 더불어 시민들의 놀이, 휴식공간, 나아가 전국의 야구팬들이 찾고 싶은 관광 명소가 될 것으로 기대를 모으고 있다. 대구광역시 수성구 연호동에 위치한 대구삼성라이온즈파크는 (주)대우건설컨소시엄이 종합 시공을, (주)백산이엔씨가 냉 난방, 위생, 소방 등 기계설비를 시공했다. 본지는 준공 후 마무리 작업이 한창인 지난 3월 중순 대구삼성라이온즈 파크 현장에서 (주)대우건설 금현철 현장소장과 (주)백산이엔씨(대표 김주환) 김재화 현장소장을 만났다.

  • PDF

Ventilation Analysis according to Jet Fan Location in Long Tunnel (장대형 터널 내 제트 팬 위치에 따른 환기해석)

  • Kang, Shin-Hyung;Byun, Ju-Suk;Lee, Jin-Ho
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.19 no.5
    • /
    • pp.386-393
    • /
    • 2007
  • This paper studies the ventilation characteristics according to the jet fan location at the long road tunnel using the CFD software 'FLUENT' which is based on the finite volume method. The tunnel model used in the analysis has a length of 1600m, a cross sectional area of $120m^3$, and is composed of 3 lanes and one way. The velocity profile, the distribution of CO concentration and the ventilation flow rate within the tunnel are analyzed, respectively. In the analysis, it is found that the dependence of the ventilation flow rate upon the jet fan location is small, but the CO concentration in the tunnel is at the lowest when the jet fans are installed near the tunnel outlet. An air stream right below the jet fan is almost inactive due to the strong stream injection near the jet fan. Thus, the pollution level below the jet fan must be higher than the other area.

Home Appliance Position Recognition through Hand Pointing Command for Arbitrary Camera Location (손 지시 명령을 통한 임의의 카메라 배치에서의 가전기기 위치 인식)

  • Yang, Seung-Eun;Do, Jun-Hyeong;Jang, Hyo-Young;Jung, Jin-Woo;Park, Kwang-Hyun;Bien, Zeung-Nam
    • 한국HCI학회:학술대회논문집
    • /
    • 2006.02a
    • /
    • pp.362-367
    • /
    • 2006
  • 지능형 주거공간에서 손 지시 명령을 통하여 가전기기를 선택하거나 로봇에게 이동하여야 하는 장소를 알려 주기 위해, 기존의 시스템은 선택되는 대상 기기의 3 차원 절대 위치를 미리 알고 있어야 한다. 또한 카메라 위치가 변동되었을 경우, 카메라의 위치를 절대좌표계 기준으로 새롭게 측정해야 하는 불편함이 있다. 이를 해결하기 위해 본 논문에서는 팬/틸트 모듈을 가진 두 대의 USB 카메라를 임의의 위치에 배치하더라도, 두 번의 손 지시만으로 선택 대상이 되는 기기의 3 차원 위치를 파악하고 이를 동작시키는 방법을 다룬다. 제안하는 방법에서는 두 대의 카메라 간의 상대 좌표계를 형성하기 위해 각 카메라에 표식을 부착한다. 각 카메라에서 다른 카메라의 표식을 관찰하면 카메라 간의 거리 및 각도를 구할 수 있기 때문에, 하나의 카메라를 기준으로 3 차원 절대 좌표계를 자동으로 설정할 수 있다. 또한, 두 대의 카메라로 사용자의 얼굴과 손을 검출하면 얻어진 기준 좌표계에 대해 얼굴과 손의 3 차원 위치를 계산하고, 두 지점을 연결하는 방향 벡터를 구함으로써 사용자가 손으로 지시하는 방향을 찾는다. 따라서, 카메라를 임의의 위치에 두더라도 사용자의 손 지시 동작만으로 대상체의 차원 위치를 파악할 수 있게 된다. 개발된 시스템의 유용성을 검증하기 위해 각 가전기기의 위치를 제안한 방법으로 구하고 실제 위치와의 오차를 분석하였다. 제안한 방법은 두 대의 USB 카메라와 일반 PC 또는 마이크로 프로세서만으로 구현할 수 있기 때문에 비용이 적게 들고 실시간 처리가 가능하며 사용자의 환경에서 편리성을 높이는 등 많은 장점을 가진다.

  • PDF

Actual State of Practical Use and Cooling Effect of Evaporative Cooling Systems (증발냉각시스템의 활용실태 및 냉방효과)

  • 김문기;유인호;김기성
    • Journal of Bio-Environment Control
    • /
    • v.8 no.4
    • /
    • pp.281-287
    • /
    • 1999
  • In order to take a good look at effectiveness of cooling of Fog system and Pad-Fan system, we chose 49 farm households which were installed evaporative cooling system and 2 farm households which were installed Pad-Fan system and Fog system for a test. We execute the test on 29 households out of 49.6 households, which were installed Pad-Fan system, were able to use; however, 6 household out of 9 which were installed Fog system couldn't use it. The main reason was the clogged on nozzle. The cooling efficiency on Pad-Fan system was 77.4%, but it was very poor on Fog system. Since there are many problems on Fog system, we need more research on size of fog, the location of nozzle, control of Fog systems.

  • PDF

The Influence of Stairway Pressurization Conditions on the Stack Effect in Super-tall Buildings (초고층건물 계단실 단독 급기가압 제연조건이 연돌효과에 미치는 영향)

  • Park, Yong-Hwan;Kim, Beom-Gyu
    • Fire Science and Engineering
    • /
    • v.24 no.4
    • /
    • pp.109-115
    • /
    • 2010
  • Maximum pressure difference in central core type 80th super_tall buildings was estimated as 75 Pa during no outside wind due to the winter stack effect. Maximum pressure difference of 225 Pa can be obtained depending on the location of air injection fan during the stairway pressurization at fire. Bottom_only air injection system provided the best results in the sense of required air flow rates and pressure distributions. Top_only air supply system was estimated as the worst for this country. It revealed that the decrease of the temperature in the stairway due to the cold outside air injection reduced the required flow rates of the fan and significantly changed the distribution of pressure differences.

Analysis of Smoke Spread Effect Due to The Fire Location in Underground Subway-Station (대심도 역사의 화재위치에 따른 연기확산 영향 분석)

  • Jang, Yong-Jun;Koo, In-Hyuk;Kim, Jin-Ho;Nam, Seong-Won
    • Proceedings of the KSR Conference
    • /
    • 2011.10a
    • /
    • pp.2885-2890
    • /
    • 2011
  • Simulation study were performed for fire location effect on the smoke spread in the deeply-underground subway station(DUSS). In this research, Shingumho station (The line # 5, Depth: 46m) has been selected as case-study for the analysis of smoke-spread effect with the different fire location. Field test data measured for actual fan in DUSS was applied as a condition of a simulation. The whole station was covered in this analysis and 4 million grids were generated for this simulation. The fire driven flow was analyzed case by case to compare the smoke-spread effect according to the fire location. In order to enhance the efficiency of calculation, parallel processing by MPI was employed and LES(large eddy simulation) method in FDS code was adopted.

  • PDF

Reduced-Scale Tests of A Intelligent Tunnel Smoke-Control System (지능형 터널 배연시스템 축소모형 실험)

  • Son, Yun-Suk;Park, Won-Hee;Kim, Chi-Hun;Jung, Woo-Sung
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2011.04a
    • /
    • pp.378-383
    • /
    • 2011
  • 지능형 터널 배연시스템은 터널상부의 온도를 감지하는 온도감지부에서 들어오는 신호를 해독하여 화재위치 및 화재크기를 선정하고 제연설비의 운전방향 및 배연량을 조절함으로써 연기를 효율적으로 제어할 수 있는 시스템이다. 지능형 터널 배연시스템의 성능을 검증하기 위하여 실물터널의 크기를 1/60로 축소한 모델에서 두가지의 화원위치에 따라 실험을 수행하였다. 화재 발생 후 초기에는 온도가 상승하다가 제연팬이 작동하면 온도가 급격히 낮아진 후 일정하게 유지되면서 서서히 증가한다. 터널화재시 승객의 피난 장애를 주는 연기의 제어를 통해 터널의 안전성을 향상시킬 수 있는 것을 확인하였다.

  • PDF

Robust Contour Tracking for Deformable Objects (객체 변형에 강건한 칸투어 추적)

  • 임성훈;박상철;이성환
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2002.10d
    • /
    • pp.610-612
    • /
    • 2002
  • 본 논문에서는 복잡 배경을 포함한 비디오 영상에서 객체 변형 및 겹침에 강건한 칸투어 추적 방법을 제안한다. 복잡 배경에서의 칸투어 추출 문제를 해결하기 위해 텍스처 분석과 노이즈 필터링 과정을 거치며, 보다 객체 원형에 가까운 칸투어 추출을 위해 각 칸투어 포인터 간 최소 경로 측정 알고리즘을 적용한다. 객체 추적 방법에 있어서 추출된 칸투어 정보는 연속된 프레임 상에서 객체 움직임이 발생했을 때 추적 위치를 판별하기 위한 모션 벡터로 사용되며, 시점에 따라 형태가 변하는 상황을 포함한 팬, 틸트, 줌에도 안정적 추적이 가능하게 하기 위해, 폐곡선을 이루는 각 칸투어 포인터들의 움직임 벡터와 칸투어내 면적의 변화에서 측정되는 이동도 측정을 통하여 객체 위치 추적을 가능하게 하였다. 또한 매 추적 과정을 진행함에 있어서 다른 객체의 겹침 및 모양변형 발생여부 검사과정을 통하여, 안정적인 추적이 가능하게 하였다. 본 논문에서 제안한 방법의 성능을 검증하기 위해 다양한 배경을 갖는 복잡 배경에 존재하는 비정형 객체를 대상으로 실험하였고, 제안된 방법이 효율적임을 확인할 수 있었다.

  • PDF

An Index Structure for Updating Continuously Moving Objects Efficiently (연속적인 이동 객체의 효과적인 갱신을 위한 색인 구조)

  • Bok Kyoung-Soo;Yoon Ho-Won;Kim Myoung-Ho;Cho Ki-Hyung;Yoo Jae-Soo
    • The KIPS Transactions:PartD
    • /
    • v.13D no.4 s.107
    • /
    • pp.477-490
    • /
    • 2006
  • Existing index structures need very much update cost because they repeat delete and insert operations in order to update continuously moving objects. In this paper, we propose a new index structure which reduces the update cost of continuously moving objects. The proposed index structure consists of a space partitioning index structure that stores the location of the moving objects and an auxiliary index structure that directly accesses to their current positions. In order to increase the fanout of the node, it stores not the real partitioning area but kd-tree as the information about the child node of the node. In addition, we don't traverse a whole index structure, but access the leaf nodes directly and accomplish a bottom-up update strategy for efficiently updating the positions of moving objects. We show through the various experiments that our index structure outperforms the existing index structures in terms of insertion, update and retrieval.

Virtual Cell based $B^+$-tree Index Structure of Moving Objects for Location Based Services (위치 기반 서비스를 위한 가상 셀 기반 $B^+$-tree 이동객체 색인 기법)

  • Park, Yong-Hun;Seo, Dong-Min;Song, Seok-Il;Yoo, Jae-Soo
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2010.06c
    • /
    • pp.185-190
    • /
    • 2010
  • 최근 위치 인식 기술과 휴대 장치의 발달로 인해 이동하는 객체를 기반으로 하는 위치 기반 서비스(Location Based Service, LBS)의 관심이 점점 증가하고 있고 그에 관련된 연구들이 활발하게 진행되고 있다. 이동 객체의 응용은 빈번하게 변경되는 이동객체의 위치정보를 효과적으로 처리할 수 있는 색인구조를 필요로 한다. 위치정보를 색인하기 위해 R-tree 기반의 색인들이 제안되었다. 하지만 R-tree는 변경보다는 검색 연산에 초점이 맞추어진 색인구조이기 때문에 잦은 변경을 다루어야 하는 이동객체 환경에 적합하지 못하다. 최근 이러한 객체의 빠른 위치 변경을 지원하는 그리드 기반의 색인 구조가 제안되었다. 하지만 셀의 객체 점유율에 따라 검색 속도가 저하되는 단점은 여전히 해결되지 못하고 있다. 이러한 단점은 객체들이 특정 영역에 몰리는 경우 또는 그리드의 해상도를 잘못 지정한 경우 더욱 부각된다. 본 논문에서는 이러한 단점을 해결하기 위해 가상 셀 기반의 색인 구조를 제안한다. 데이터 페이지에 객체의 점유율을 보장하기 위해 여러 개의 인접한 셀들의 데이터를 한 데이터 페이지에 함께 저장한다. 공간 채움 곡선을 기반으로 순서화된 셀들로 셀의 인접성을 결정한다. 또한 공간 채움 곡선의 차수를 동적으로 지정하여 객체가 집중된 셀에 대해서는 셀의 단위 크기를 작게 지정한다. 뿐만 아니라 셀을 표현하기 위한 식별자를 위해 비트를 이용한 표현식을 제안하였다. 이로 인해 노드의 팬아웃을 증가시켰고, 저장공간을 절약하였다. 실험을 통해서 제안하는 색인 기법의 우수성을 증명하였다.

  • PDF