• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.143-149
• /
• 2009

Recently, according to the tendency to the more comfortable automobile, the improvement of performance of the cooling fan is required. The performance of cooling fan is affected by many peripheral parts, such as radiator, condenser, engine block and etc. Therefore, it is important to consider the effect of peripheral components on the fan performance in design and analysis stages. In this paper, the performance of automobile cooling fan is investigated experimentally by using the large capacity fan tester based on the ASHRAE and the AMCA standards. In particular, the various spacing between cooling fan and engine block are considered to obtain the effect of engine block. An empirical relation between the fan flow rate and the spacing was proposed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.4
• /
• pp.1491-1500
• /
• 1996

Unstable performance deterioration was found on the performance curve of a small propeller fan with a back plate. To investigate this phenomenon and the effects of the back-plate on the performance of the fan, performance tests and flow measurement using 3-hole pitot tube were carried out. Measurements showed that when the flow rate is small, the radial flow dominates, and when the flow rate is large, the axial flow dominates. Performance characteristic of the propeller fan changes from radial to axial type as the flow rate increases. Unstable performance changes are the result of type change of the flow through the fan.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.6-6
• /
• 1998

중형항공기용 터보팬 엔진의 정상상태 및 천이상태 성능을 해석하고 제어기 설계를 위한 선형모델을 구하였다. 정상상태 성능해석은 설계점으로 선정한 지상정지조건과 최대상승조건(Mach=0.78, 고도=36000ft) 및 순항조건(Mach=0.78, 고도=39000ft)을 고려하였으며, 저압압축기의 공회전 상태에서 최대 회전속도까지의 부분부하성능해석을 수행하였다. 부분부하 성능해석 결과 90% RPM 조건에서 가장 연료소모율이 적어 경제적임을 알 수 있다. 동적 성능모사는 각각의 대기조건에서 연료가 Step 증가, Ramp 증가 및 감소, Step 증가 후 Ramp 감소하는 경우에 대해 수행하였다. 모사결과 고려된 모든 조건에서 연료의 Step 증가시 고압압축기의 터빈입구온도가 제한온도를 초과하여, 보다 빠른 가속과 최적의 성능을 위해서는 적절한 제어가 필요함을 알 수 있었다. 또한 최대상승조건에서 연료를 Step 증가시킬 경우 고압압축기에서 실속이 발생하여 이에 대한 대책도 필요함을 알 수 있었다.

• Journal of KIISE
• /
• v.43 no.7
• /
• pp.820-826
• /
• 2016

There is a growing requirement for big data processing which extracts valuable information from a large amount of data. The Hadoop system employs the MapReduce framework to process big data. However, MapReduce has limitations such as inflexible and slow data processing. To overcome these drawbacks, SQL query processing techniques known as SQL-on-Hadoop were developed. Apache Tajo, one of the SQL-on-Hadoop techniques, was developed by a Korean development group. External merge sort is one of the heavily used algorithms in Tajo for query processing. The performance of external merge sort in Tajo is influenced by two parameters, sort buffer size and fanout. In this paper, we analyzed the performance of external merge sort in Tajo with various sort buffer sizes and fanouts. In addition, we figured out that there are two major causes of differences in the performance of external merge sort: CPU cache misses which increase as the sort buffer size grows; and the number of merge passes determined by fanout.

• Journal of Aerospace System Engineering
• /
• v.13 no.1
• /
• pp.38-46
• /
• 2019

There is a growing interest in engine diagnostic technology for gas turbine engines. An engine simulation program, precisely simulating the engine performance, is required in order to apply it to the engine diagnosis technology for engine health monitoring. In particular, the simulation program can predict not only design point performance but also off-design point and partial load performance in accurate. So the engine simulation program for the 2-spool separate flow type turbofan engine was developed and the JT9D-7R4G engine of PW(Pratt & Whitney) was analyzed. The steady-sate performance analysis is conducted at both design and off-design points in flight path and the differences between analysis results of takeoff and cruise conditions are compared. The effect of Reynold's correction method was analyzed as a scaling method of the engine component performance. The simulation results was compared with NPSS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.593-601
• /
• 2021

The axial fan is an element of a blower used for ventilation in various industrial fields. Many studies on aerodynamic performance have been conducted to assess axial fans using fluid dynamics. The subject was a large axial fan size, 1800 mm in diameter with 100 horsepower. The blower's axial fan consisted of blades, hubs, hub caps, and bosses are important components. The blade design has a great influence on the aerodynamic performance. 3D point data is extracted using an aerodynamic performance prediction program, and a 3D modeling shape is generated. The blades and hubs, which are important components, can be easily modified if processed by cutting owing to the environment in which blades and hubs are manufactured through die casting or gravity casting. In this study, the structural safety of components and the analysis results of weak areas at the rated operating speed of the axial fan were verified using the maximum stress and safety factor. The tip clearance reflected in the design was the rotation of the blade. To check whether there is interference with other components, the displacement result was derived to verify the structural safety of the axial fan.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.313-318
• /
• 2011

도로터널은 반지하 공간으로서 환기에 많은 설비와 구조에 대한 연구가 진행되고 있으며 특히 제트팬의 경우 평상시에는 환기를 담당하고 있다. 또한 화재시에는 화재연기의 유독가스를 효과적으로 차단하는 제연역할을 함으로서 피난에 대한 중요한 역할을 담당한다. 이러한 제트팬의 특성을 정량적으로 유추하고 공학적인 QRA의 수행을 위한 기초적 연구로서 터널내부의 제트팬의 환기특성을 알아보기 위하여 모형실험체의 내부측정을 2/3까지한 전보에 이어 이번 연구에서는 터널내부전체를 측정하여 제트팬이 모형터널내에 미치는 영향을 CFD와 비교한 연구이다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.34-36
• /
• 2017

축류 팬(axial fan)은 팬이 회전하면서 다량의 공기를 불어주는 유체 기계로써 최근 저소음에 대해 중요하게 인식되고 있다. 본 연구는 팬 주위의 소음을 해석하는 MPI 병렬프로그램에 대한 최적화 기법에 대해 다룬다. 이때 수억 개 이상의 격자에서 수만 포인트의 소음을 해석하기 위해서 MPI 프로세스 간 통신이 많이 발생하여 성능이 심각하게 느려지는 현상이 발생한다. 이를 극복하기 위해 MPI 일방향통신을 적용하였다. 뿐만 아니라 통신 및 메모리 최적화 방법을 통해 최대 2.97배 향상시켰다.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.103-111
• /
• 2024

Axial-flow fans are used to transport fluids in relatively low-pressure flow regimes, and a variety of design variables are employed. The tip geometry of an axial fan plays a dominant role in its flow and noise performance, and two of the most prominent flow phenomena are the tip vortex and the tip leakage vortex that occur at the tip of the blade. Various studies have been conducted to control these three-dimensional flow structures, and winglet geometries have been developed in the aircraft field to suppress wingtip vortices and increase efficiency. In this study, a numerical and experimental study was conducted to analyze the effect of winglet geometry applied to an axial fan blade for an air conditioner outdoor unit. The unsteady Reynolds-Averaged Navier-Stokes (RANS) equation and the FfocwsWilliams and Hawkings (FW-H) equation were numerically solved based on computational fluid dynamics techniques to analyze the three-dimensional flow structure and flow noise numerically, and the validity of the numerical method was verified by comparison with experimental results. The differences in the formation of tip vortex and tip leakage vortex depending on the winglet geometry were compared through a three-dimensional flow field, and the resulting aerodynamic performance was quantitatively compared. In addition, the effect of winglet geometry on flow noise was evaluated by numerically simulating noise based on the predicted flow field. A prototype of the target fan model was built, and flow and noise experiments were conducted to evaluate the actual performance quantitatively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.27-32
• /
• 2012

Since LED lights have advantages of long life, low-carbon and high efficiency, they have been widely used as household lamps, automotive lighting, traffic lights etc. In this study, MCPCB LED lamps for automotive LED headlights were manufactured and the performance of heat release was optimized. The developed LED headlight satisfied the target thermal performance with heat pipes and fans, and it was also shown that fan life can be prolonged three times by fan on-off control.