Kim, Ho-Jung;Choe, Hu-Mi;Yun, Deok-Ju;Lee, Jong-U;Gang, Bong-Gyun;Kim, Min-Su;Park, Jin-Gu;Kim, Tae-Seong
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.40-40
/
2011
반도체 소자의 미세화와 더불어 세정공정의 중요성이 차지하는 비중이 점점 커지고, 이에 따라 세정 기술 개발에 대한 요구가 증대되고 있다. 기존 세정 기술은 화학약품 위주의 습식 세정 방식으로 패턴 손상 및 대구경화에 따른 어려움이 있다. 따라서 건식세정 방식이 활발하게 도입되고 있으며 대표적인 것이 에어로졸 세정이다. 에어로졸 세정은 기체상의 작동기체를 이용하여 에어로졸을 형성하고 표면 오염물질과 직접 물리적 충돌을 함으로써 세정한다. 하지만 이 또한 생성되는 에어로졸 내 발생 입자로 인해 패턴 손상이 발생하며 이러한 문제점을 극복하기 위하여 대두되는 것이 가스클러스터 세정이다. 가스 클러스터란 작동기체의 분자가 수십에서 수백 개 뭉쳐 있는 형태를 뜻하며 이렇게 형성된 클러스터는 수 nm 크기를 형성하게 된다. 그리고 짧은 시간의 응축에 의해 수십 nm 크기까지 성장하게 된다. 에어로졸 세정과 다르게 클러스터가 성장할 환경과 시간을 형성하지 않음으로써 작은 클러스터를 형성하게 되며 이로 인해 패턴 손상 없이 오염입자를 제거하게 된다. 이러한 가스 클러스터 세정을 최적화하기 위해서는 설계 단계부터 노즐 내부 유동의 수치해석에 기반한 입자 크기 분포를 계산하여 반영하는 것이 필요하다. 따라서 본 연구에서는 상용 수치해석 프로그램을 이용하여 세정 환경을 조성하는 조건에서의 노즐 내부 유동을 해석하고, 이를 통해 얻어진 수치를 이용하여 aerosol general dynamic equation (GDE)를 계산하여 발생하는 클러스터의 크기 분포를 예측하였다. GDE 계산 시 입자의 크기 분포를 나타내기 위해서는 여러 가지 방법이 존재하나 본 연구에서는 각 입자 크기 노드별 개수 농도를 계산하였다. 노즐 출구에서의 가스 클러스터 크기를 예측하기 위하여 먼저, 노즐 내부 유속 및 온도 분포 변화를 해석하였다. 이를 통하여 온도가 급격하게 낮아져 생성된 클러스터의 효과적 가속 및 에너지 전달이 가능함을 확인할수 있었다. 이에 기반하여 GDE를 이용한 입자 크기를 예측한 결과 수 나노 크기의 초기 클러스터가 형성되어 온도가 낮아짐에 따라 성장하는 것을 확인할 수 있었으며, 최빈값의 분포가 실험적 측정값과 일치하는 경향을 가지는 것을 볼 수 있었다. 이는 향후 확장된 영역에서의 유동 해석과 증발 등 세부 요소를 고려한 계산을 통해 가스 클러스터 세정 공정의 최적화된 설계에 도움이 될 것이다.
We fabricated a-Si:H thin-film solar cell using the two-dimensional (2D) periodic patterned glass substrate. The use of a 3D periodic texture rather than a randomly texture at surface of TCO can result in higher short circuit current densities ($J_{sc}$). In order to analyze the optical effect of patterning glasses, ray-tracing simulations were performed. Also, p-i-n cells were deposited on patterned glasses as substrate by PECVD. UV-Vis spectroscopy, light I-V measurement were carried out for the optoelectronic characterization. The anti-reflective and light-trapping performance of patterning glass substrate was investigated by a comparison of experimental results with numerical simulations.
This study examined the growth characteristics and carbonization pattern when a fire occurs due to a flammable liquid sprinkled on a vinyl floor. When acetone was sprinkled on a floor, the flame reached its peak in approximately 0.2 s after it was ignited. The lower part of the flame showed a laminar pattern while the upper part showed a turbulent pattern. The pattern showed a turbulent pattern and generated white smoke. The combustion completed floor surface showed carbonization of a dim pore pattern. In the case of benzene, an intense flame was formed in approximately 0.6 s after ignition. The flame length was measured to be approximately 50 mm. When the flame became weak, a significant amount of black smoke was generated due to incomplete combustion. The combustion completed floor surface showed carbonization of a pour pattern and splash pattern. In the case of alcohol, an intense flame was formed in approximately 1.1 s after ignition. In addition, the depth of carbonization was significant where the flammable liquid was collected and a trace of carbonization was observed at the boundary of the flow path of the flammable liquid.
The Journal of Korean Institute of Electromagnetic Engineering and Science
/
v.18
no.11
/
pp.1279-1290
/
2007
In this paper, a cylindrical hybrid antenna which is spatially fed by an off-set linear feed array is described to form complex beam patterns. The linear feed array consists of twelve micro-strip patch elements and forms a flat-topped beam pattern with a beam-width of $90^{\circ}$ in the horizontal plane. The vertical curve on the cylindrical reflector with the linear feed array is shaped in order to form a cosecant beam pattern within the range of $-5^{\circ}$ to $-25^{\circ}$ in the vertical plane. To form complex beam patterns, the hybrid antenna with cylindrical reflector aperture of $140{\times}50\;cm$ was designed and fabricated to be operated within the IMT 2000 service band, and also electrical performances of the antenna were measured and analyzed.
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.472.2-472.2
/
2014
현재 결정질 실리콘 태양전지의 전 후면 전극의 형성은 스크린 프린팅 방법이 주를 이루고 있다. 스크린 프린팅 방법은 쉽고 빠르게 인쇄가 가능한 반면 단가가 높고 금속 페이스트에 첨가된 여러 혼합물에 의해서 전극과 기판 사이의 저항이 크다는 단점이 있다. 본 논문에서는 도금을 이용하여 태양전지의 전극을 형성한 후 태양전지의 전기적 특성을 비교하였다. 또한 단일반사방지막($SiN_x$) 증착 후 도금을 이용한 전극 형성 시 반사방지막의 pin-hole에 의해 전극 이외의 표면에 도금이 되는 ghost plating 현상이 발생하게 되는데, 이를 방지하기 위해 thermal oxidation을 이용하여 SiO2/SiNx 이중반사 방지막을 증착함으로써 ghost plating을 최소화 시켰다. Ni을 이용하여 전극과 기판 사이의 저항을 낮추었으며, 주요 전극은 Cu 도금을 사용함으로써 단가를 낮추었으며 마지막으로 Cu전극의 산화를 방지하기 위해 Ag을 이용하여 얇게 도금하였다. 실험에 사용된 Si 웨이퍼 특성은 p-형, $156{\times}156mm2$, $200{\mu}m$, $0.5{\sim}3.0{\Omega}{\cdot}cm$ 이다. 웨이퍼는 표면조직화, p-n접합 형성, 반사방지막 코팅을 하였으며 스크린 프린팅 방법을 이용해 후면 전극을 인쇄하고 열처리 과정을 통해 전극을 형성하였다. 이 후 전면에 레이저를 이용해 전극 패턴을 형성한 후 도금을 실행하여 태양전지를 완성하였다. 완성된 태양전지는 솔라 시뮬레이터, QE 및 TLM패턴을 이용하여 전기적 특성을 분석하였으며, SEM과 linescan, 광학현미경 등을 이용하여 전극을 분석하였다.
Kim, Jeong-Hye;Kim, Jun-U;Lee, Gwang-Jun;Jeong, Seung-Jun;Jeong, Jae-Uk;Choe, Byeong-Dae
Proceedings of the Korean Vacuum Society Conference
/
2013.02a
/
pp.427-427
/
2013
잉크젯 프린팅 방법은 전도성 고분자 물질을 잉크 재료로 사용하여 전자 소자의 전극 패턴을 형성할 수 있으며 비접촉, drop-on-demand 공정으로 현재 많은 관심을 받고 있는 연구 분야이다. Ag는 $1.59{\mu}m{\cdot}cm$의 저항을 나타내는 가장 낮은 저항을 가지고 있는 물질 중의 하나이며, Ag 전도성 잉크는 고전도 패턴의 형성을 위해 현재 많이 사용되고 있는 물질이다. 본 연구에서는 a-IGZO 박막을 채널층으로 사용하여 Ag S/D 전극을 잉크젯 프린팅 방법으로 형성하여 산화물 트랜지스터를 제작하였다. a-IGZO 채널층은 $SiO_2$가 증착된 Si 기판위에 스퍼터링 방식으로 80 nm의 두께로 형성하였다. Ag S/D 전극은 10 pl의 카트리지가 장착된 Fujifilm Dimatix DMP 2800 장비를 사용하여 형성하였으며, 프린팅 후 $130^{\circ}C$로 20분간 열처리를 하였다. Fig. 1은 잉크젯 프린팅된 Ag S/D을 가진 a-IGZO의 트랜지스터 특성을 보여준다. 채널 W/L가 90/$50{\mu}m$ 구간에서 드레인 전압이 50 V 일때, 전계효과이동도 $0.27cm^2$/Vs, 문턱전압 6.03 V, 문턱전압 아래의 기울기 값은 2.06 V/dec를 얻었다. 이와 같은 특성은 잉크젯 프린팅 방법으로 Ag S/D 전극을 형성함으로써 산화물 TFT에서 잉크젯 프린팅 방식의 다양한 응용 가능성을 확인할 수 있었다.
Oh Se Young;Choi Hyung Seok;Kim Hee Jeong;Park Je Kyun
Polymer(Korea)
/
v.29
no.4
/
pp.331-337
/
2005
In general, alkanethiolates having carboxylic acid in the tail group have been used as biorecepton. In this study, we have immobilized a cytochrome c protein using conjugated aromaticthiolates in order to improve the electrical property and physical stability of alkanethilolates. The pattern formation of self-assembled aromaticthiolate monolayers was as follow. Aromatic thiolates bound on the gold surface by the adsorption of 4'-mercapto-biphenyl-4-carboxylic acid and 4-mercapto-[1,1';4',1']terphenyl-4'-carboxylic acid were oxidized by the irradiation of deep UV light through a negative mask. The negative type pattern of the self-assembled monolayer (SAM) was obtained by developing with a deionized water. The pattern formation and electrical conductivity of aromaticthiolate SAMs was investigated by the measurements of STM and AFM. In addition, cytochrome c or ferrocene amide was immobilized onto the patterned substrate. We also studied on the effect of conjugated aromatic thiolates on the electrical activity of cytochrome c or ferrocene amide by cyclic voltammetry.
An integrated light guide plate (LGP) was designed for liquid crystal displays (LCD) without using prism and diffuser sheets. The integrated LGP is textured with micro-patterns on both the top and bottom surfaces. The textures effectively substitute for a single prism-sheet and a diffuser sheet in LCD displays without decreasing the brightness and uniformity. A LCD display with our integrated light guide is simulated to give average luminance of 4560 cd/$m^2$, luminance uniformity of 83% horizontal viewing angle $60^{\circ}$ and vertical viewing angle $56^{\circ}$. Therefore an ultra thin (slim) back light unit can be constructed with fewer optical sheets, which reduces the manufacturing cost and so improves price competitiveness.
Jo, Han-Byeol;Byeon, Gyeong-Jae;O, Sang-Cheol;Lee, -Heon
Proceedings of the Materials Research Society of Korea Conference
/
2011.05a
/
pp.31.1-31.1
/
2011
현재 발광 소자, 태양전지, 디스플레이 등의 산업 분야에서는 저반사 나노 패턴, 광결정 패턴, 초소수성 나노 구조 등을 적용하여 소자의 효율을 향상시키기 위한 연구가 진행되고 있다. 하지만 이러한 기능성 패턴 제작을 위해서는 기능성 소재의 증착, 노광 공정, 식각 등의 복잡하고 고가인 공정이 필요하기 때문에 실제 적용이 어려운 한계가 있다. 이에 본 연구에서는 나노 입자가 분산된 레진을 직접 임프린팅하는 저비용의 간단한 공정으로 나노 크기에서 마이크론 크기에 이르는 다양한 기능성 패턴을 제작하였다. 구체적으로, ZnO 나노 입자를 PMMA 레진에 분산하여 나노 입자 솔루션을 제작하였고 열경화 임프린트 공정을 통해서 Si 및 글래스 기판 위에 micron 및 sub-micron 급의 격자 패턴을 형성하였다. 이후 레진에 포함되는 ZnO 나노 입자 함량비에 따른 굴절률 및 투과도와 표면 거칠기에 따른 접촉각 측정을 통해서 기능성 패턴의 광학특성 및 표면특성을 분석하였다.
Sin, Du-Sik;Lee, Jun-Ho;Lee, Chi-Won;Jang, Won-Seok;Yu, Yeong-Eun;Choe, Du-Seon
Proceedings of the Optical Society of Korea Conference
/
2008.02a
/
pp.265-266
/
2008
본 논문은 기존 도광판에 복합화된 마이크로 패턴을 이용하여 휴대폰용 LCD Backlight Unit의 설계 및 해석에 대한 연구이다. 현재 상용 시제품의 도광판 패턴에 복합된 마이크로 패턴을 이용하여 광학시트를 줄이는 것을 목표로 진행 하였다. 도광판의 윗면에 프리즘형상을 설계 하였고, 아랫면은 기존의 패턴에 마이크로 패턴을 형성하였다. 마이크로 패턴의 형상은 구면, 프리즘, 실린더로 각 형상에 대해 변수를 바꾸어 가며 최적의 설계 값을 찾아보았다. 설계된 복합패턴으로 기존 Backlight Unit의 구성품인 반사판, 도광판, 확산판, BEF를 반사판과 도광판 만으로도 대체 할 수 있음을 시뮬레이션을 통해 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.