• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.287-290
• /
• 2002

'Backhole' is an extra empty volume where is located behind the tangential entries at the rear par of the vortex chamber in the swirl coaxial injector. With the backhole, there are three major hydraulic characteristics. First, mass flow rate is increased about $15{\%}$ compared with the case without the backhole. Second, with the backhole, the center region of the injected flow has more large volume than that of without the backhole. The last, some range of the cone angle can be controlled by the backhole Experiments are conducted by using a PDPA apparatus, a mechanical patternator, stroboscopic photography and etc. With the backhole, based on cold-flow tests, the model swirl injector has some Improvement in its performance.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.93-101
• /
• 2000

The characteristics of spray nozzle have been quantified with the measurement of fluorescence and Mie scattering images. To correct the attenuation of the incident light sheet, a sequential double-pass light sheet system and the geometrical averaging of two images was implemented. Quantitative mass flux distribution of spray was obtained from fluorescence image. 3-D image is reconstructed using 2-D radial images. Sauter mean diameter (SMD) distribution was determined using the ratio of fluorescence signal intensity and Mie scattering signal intensity and the values were quantified with PDP A data. The measurement of mass flux and SMD using planar imaging technique agee with PDP A data fairly well in the low density region. However, in dense region， there are significant errors caused by secondary scattering. It was found that the planar imaging technique provides many advantages over the point measurement technique, such as PDP A, and can be implemented for quantitative measurement, especially in low density region.

• 한국추진공학회지
• /
• 제7권2호
• /
• pp.23-35
• /
• 2003

백홀은 스월 인젝터의 새로운 기하학적인 설계요소로서 스월 인젝터 내부에 있는 와류실의 연직 주입구후방에 위치하는 추가적인 빈 공간을 총칭한다. 이 백홀은 분무각이나 평균액적지름(SMD), 혼합 특성과 같은 스월 인젝터의 분무 특성을 변화시키게 된다. 이러한 백홀의 특성을 알아보기 위하여 직$.$간접 촬영 기법 및 PDPA와 기계적 유량 포집기 등을 사용하여 수류실험을 수행하였다. 백홀이 스월 인젝터 내에 존재하게 되면 단위시간당 유량이 증가하게 되어 분무되는 유동의 중심부가 강화된다. 또한 백홀은 스월 인젝터의 유동 분무각을 조절할 수 있게 하고 그로 인하여 혼합 효율을 변화시킨다.