• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.72-73
• /
• 2016

In this paper, we studied a method for miniaturizing a broadband stacked patch antenna structure which is widely used for bandwidth improvement. Main patch is a rectangular microstrip patch antenna fed by a 50-ohm microstrip line, and a parasitic patch is laid above the main patch. The size of the main patch is designed to be resonated near the center frequency of the desired frequency band. Then parasitic patch longer than main patch is placed above the main patch. The distance between two patches might be adjusted so as to achieve impedance matching using a shunt open stub. The shunt matching stub is inserted underneath the parasitic patch and so it does not require additional space, which enables the proposed antenna structure to be advantageous in miniaturizing antenna. The effects of the various parameters on the antenna performance are examined, and we introduced the design procedure for the proposed antenna to operate in the frequency range of 2.3-2.7 GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.874-879
• /
• 2016

A wideband stacked patch antenna with parasitic elements, rectangular and triangle shaped patches, is proposed. Two different shaped parasitic elements are placed in the above of main rectangular microstrip patch antenna in order to achieve wide bandwidth for 860 MHz band. Coupling between the main patch and parasitic patches is realized by thick air gap. The gap and locations of parasitic patches are found to be the main factor of the wideband impedance matching. The proposed antenna is designed and fabricated on a ground plane with small size of $119mm{\times}109mm$ for application of compact transceivers. The fabricated antenna on an FR4 substrate shows that the minimum measured return loss is below -11.68dB at 824 MHz and an impedance band of 818~919 MHz(11.7%) at 10dB return loss level. The measured radiation patterns are similar to those of a conventional patch antenna with maximum gain of 2.11 dBi at 824 MHz.

• Journal of the Korea Convergence Society
• /
• v.9 no.6
• /
• pp.45-52
• /
• 2018

In this paper, we propose a linear interpolation method based on patch information generated from a low - resolution image for generating a super resolution image in a single image. Using the regression model of the global space, which is a conventional super resolution generation method, results in poor quality in general because of lack of information to be referred to a specific region. In order to compensate for these results, we propose a method to extract meaningful information by dividing the region into patches in the process of super resolution image generation, analyze the constituents of the image matrix region extended for super resolution image generation, We propose a method of linear interpolation based on optimal patch information that is searched by correlating patch information based on the information gathered before the interpolation process. For the experiment, the original image was compared with the reconstructed image with PSNR and SSIM.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.83-84
• /
• 2016

A wideband stacked patch antenna with parasitic elements, rectangular and triangle shaped patches, is proposed. Two different shaped parasitic elements are placed in the above of main rectangular microstrip patch antenna in order to achieve wide bandwidth for 860 MHz band. Coupling between the main patch and parasitic patches is realized by thick air gap. The gap and locations of parasitic patches are found to be the main factor of the wideband impedance matching. The proposed antenna is designed on a ground plane with small size of $119mm{\times}109mm$ for application of compact transceivers. And the impedance bandwidth of the antenna should satisfied CDMA band to the 780MHz~890MHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.599-602
• /
• 2004

In this paper, an automatic setting method of control parameters for robot scorer is proposed. First we acquisited some local image lesions including robots and ball patch, and sampled the regions to RCB value. Edge operator is applied to get magnitude of gradient at each pixel. Some effective patch regions can be detected by magnitude of gradient, and YUV value at each pixel in patch lesions can be obtained. We can determine control parameters of robot soccer using luminance component of YUV. The proposed method is applied to robot soccer image to detect initial patch value and get control parameters adaptively in light variation.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.22-25
• /
• 2015

This paper performs Color Code Control Connected with Sound Source and Sensitivity of PA Speaker facility attachable LED patch. PA speaker delivers the technology to control the color code of LED patch along the present PA speakers for the facility-attached, LED the development of the patch. PA speakers facility attachable color code control technology of LED patch detects the sound from the PA speaker using a check, and if the analog signal source is detected (sound source)by converting the digital signal passes to the main controller can control the color and pattern of LED patches. In this paper, based on the PA speakers LED color control system, sound emotional linkage-type, and follow the lead of the PA speakers through the feelings can effectively channel LED linked to the source type and proceed to experiment with color and emotion control, whether or not they offer via the color control technology LED patch availability. PA speaker facility attachble color code control technology of LED patch connected with the source and future research directions in the field, and as the application is expected to be able to be widely utilized.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06a
• /
• pp.343-344
• /
• 2008

최근 시스템의 복잡도가 증자함에 따라 보안 취약점 문제가 더욱 많이 발생하고 있다. 이를 해결하기 위해 보안 패치가 배포되고 있지만, 시스템 서비스의 중단이 필요하고 패치 자체의 안정성이 검증되지 못해 패치의 적용이 늦어지는 문제가 발생한다. 우리는 이러한 문제를 해결하기 위해 업데이트성이 없는 커널을 위한 함수 단위 동적 업데이트 시스템인 DUNK를 설계 하였다. DUNK는 서비스 중단 없는 업데이트를 가능케 하고, 보안 기법인 MAFIA를 이용해 안전한 업데이트를 수행한다. MAFIA는 바이너리 패치 코드의 접근 행위를 분석함으로써 패치된 함수가 기존 함수의 접근 권한을 상속받도록 하고, 이를 검증하는 기술을 제공한다. 본 논문에서는 DUNK의 설계와 MAFIA의 알고리즘 및 수행에 대해 기술한다.

• Review of KIISC
• /
• v.30 no.5
• /
• pp.71-77
• /
• 2020

딥러닝 기술은 이미지 분류 문제에 뛰어난 성능을 보여주지만, 공격자가 입력 데이터를 조작하여 의도적으로 오작동을 일으키는 적대적 공격(adversarial attack)에 취약하다. 최근 이미지에 직접 스티커를 부착하는 형태로 딥러닝 모델의 오작동을 일으키는 적대적 패치(adversarial patch)에 관한 연구가 활발히 진행되고 있다. 하지만 기존의 적대적 패치는 대부분 눈에 잘 띄기 때문에 실제 공격을 받은 상황에서 쉽게 식별하여 대응할 수 있다는 단점이 있다. 본 연구에서는 GAN(Generative Adversarial Networks)을 이용하여 식별하기 어려운 적대적 패치를 생성하는 기법을 제안한다. 실험을 통해 제안하는 방법으로 생성한 적대적 패치를 이미지에 부착하여 기존 이미지와의 구조적 유사도를 확인하고 이미지 분류모델에 대한 공격 성능을 분석한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.108-111
• /
• 2007

네트워크가 광범위하게 발달함에 따라 악의적인 공격도 늘어나고 있다. 악의적인 공격을 막는 방법으로 침입을 차단하는 프로그램을 설치하는 것 외에도 시스템을 패치하는 것은 중요한 부분을 차지한다. 패치 분배 시스템은 대규모 네트워크 상의 시스템에 패치를 분배할 때 부하 분산을 하기 위하여 계층적 구조로 설계된다. 본 논문에서는 계층적 패치 분배 구조에서 상위 계승이 하위 계층을 효과적으로 인증하기 위한 방법을 제안한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.469-470
• /
• 2015

General microstrip patch antenna has small bandwidth. Also this patch antenna is strongly influenced by the thickness of dielectric substrate and its relative permittivity. In this paper, wideband microstrip patch antenna operating in 2.4GHz ISM band is studied. Input impedance and return loss for designed microstrip patch antenna by using MoM method and is estimated.