• The Korean Journal of Applied Statistics
• /
• v.24 no.1
• /
• pp.25-34
• /
• 2011

The transition probability can be used for the estimation of subpopulation total in panel data analysis. In this paper a real data analysis is performed and the sensitivity of the sample size allocated in the subpopulation is examined by small simulation studies.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1121-1126
• /
• 1998

For vacuum seated panel, stresses and displacements in the glass plate were calculated. The geometric variables for our experiment were the thickness of glass plate, the size of panel and the width of sealing line. The fracture behaviors and displacements of its under the vacuum were measured. From the measurement of strains and fracture, it was considered that the maximum stress acted at the middle of the sides of the panel. The stresses and displacement distribution of manufactured panels were greatly dependent on the width of the sealing line in the panel. The measured values are more similar to the values which were calculated from the condition of built-in edge as the width of the sealing line is larger. The measured displacement of the panel, made of 3mm thick glass plate, with size of $80\Times120\textrm{mm}^2$ and 20mm sealing line was $57\mu\textrm{m}$. This value is similar to calculated value, $54\mu\textrm{m}$, from built- in edge condition in the finite element method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.929-935
• /
• 2013

This paper presents the results of sizing optimization of ahat-shaped stiffener on a rectangular stiffened panel. The stiffened panel is subjected to impact loading by a projectile with a velocity of 1500-2500 m/s. To determine the size of the hat-shaped stiffener, sizing optimization was performed. The sizing optimization consists of three functions: objective, constraint, and design functions. The objective function is used to maximize the fundamental frequency of the stiffened panel. The constraint function is that the stiffener volume is less than 10% of the plate volume. The design function is the dimensions of the hat-shaped stiffener. By using the stiffened panel with the optimized hat-shaped stiffener, a hypervelocity impact was simulated, and the velocity and kinetic energy on the optimized stiffener was obtained. To evaluate the impact reduction on the stiffened panel, the velocity and kinetic energy of the projectile was normalized and compared.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.62-69
• /
• 2010

LCD panel need BLU(Back Light Unit) that is outside source of light because can not emit light voluntarily. BLU is used in LCD module and is used in tester that examine LCD panel's badness. Lately, BLU had changed from CCFL(Cold Cathode Fluorescent Lamp) to LED(Light-Emitting Diode) fast. CCFL need extra-high tension power and produce much heat and is difficult to keep fixed brightness. LED is few electric power wastage and keeps fixed brightness. But, BLU that is used to detector that examine the LCD module is using CCFL until recently. This paper develops LED BLU that can examine LCD panel's badness. Also, this manufactures LED BLU to 24 inch size to examine all LCD panels(12~24 inch), and develops so that LED BLU may operate according to LCD panel's size.

• Journal of the Korean Vacuum Society
• /
• v.4 no.3
• /
• pp.247-252
• /
• 1995

진공측정용 센서의 크기보다 더 작은 미세소자 내부의 진공도를 계산에 의해 간접적으로 구하는 방법을 제시하였다. 평판디스플레이용 진공판넬의 설계에 본 연구의 결과를 적용하는 방법에 대해 연구하였으며, 패널의 진공도는 패널과 배기장치의 형상에 강하게 의존하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.144-145
• /
• 2014

In the cement,that is the main materials of the panel, as to the cofired process, more than 1,300 enormous energies is consumed, in addition the greenhouse gas generated in the process of producing the cement occupies 6.3% of the country whole emission quantity. And the carbon dioxide of about 0.8 ton is the cement ejected in 1 production. Accordingly, the panel utilizing the industrial byproduct is developed. Accordingly, this research is the experiment which makes the individual size into the environment-friendly inorganic binder panel and by using the blast furnace slag, which is the industrial byproduct with the cement substitute material red mud, silica fume, and etc. looks at the dry shrinkage. The length variation in which the panel which is 450 with the dry shrinkage result of measurement, thickness 12mm, and size 450mm is the smallest was shown.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.249-256
• /
• 2007

AIn this paper, a new desist of LDI controller IC for general purpose is proposed for driving the LDI(LCD Driver Interface) controller in $4{\sim}9$ inches sized portable small-medium TFT-LCD(Thin Film Transistor addressed -Liquid Crystal Display) panel module. The designed LDI controller was verified on the FPGA(Reld Programmable Gate Array) test board, and was made the interactive operation with the commercial TFT-LCD panel successfully. The purpose of design is that it is standardized the LDI controller's operation by one LDI controller for driving all TFT-LCD panel without classifying the panel vendor, and size. The main advantage for new general-purpose LDI controller is the usage for the desist of all panel's SoG(System on a Glass) module because of the design for the standard operation. And in the previous method, it used each LDI controller for every LCD vendor, and panel size, but because a new one can drive all portable small-medium sized panel, it results in reduction of LDI controller supply price, and manufacturing cost of AV(Audio Video) board and panel. In the near future, the development of SoG IC(Integrated Circuit) for manufacturing more excellent functional TFT-LCD panel module is necessary. As a result of this research, the TFT-LCD panel can make more small size, and light weight, and it results in an upturn of domestic company's share in the world market. With the suggested theory in this paper, it expects to be made use of a basic data for developing and manufacturing for the SoG chip of TFT-LCD panel module.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.8
• /
• pp.603-609
• /
• 2017

In the deployable solid surface antennas, the effects on the performances of antenna due to the structural errors that occur during the deployment are analyzed. The deployable solid surface antennas employed in a satellite are launched in folded configuration and those are deployed in the space environment, and the effects on the antenna performance are calculated depending on the type of surface errors. When the deviation error occurs in one panel, the degradation of performance appears in the side where the incomplete deployment of panel occurs. By assuming that the panel error distribution is in cosine function, the effect of errors are calculated and analyzed with regard to the types and the magnitude of the error. If the antena panel error is uniform, the gain is reduced and pattern is symmetric. For the panel error of cosine 1 or 3 cycle, the main lobe tilts while the pattern is symmetric and the gain reduces for 2 or 4 cycle error.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.57-60
• /
• 2011

EPS패널의 열방출율과 가스유해성에 대한 연구는 꾸준히 진행되어왔다. 그러나 그 동안의 시험 결과는 KSF ISO 5660-1(콘칼로리미터) 시험규정에 의한 소형시편을 이용한 것으로 난연제의 과다투입 또는 심재의 변형이 쉬워 결과를 신뢰하기 힘들고 실제 생산되는 크기의 샌드위치패널의 난연성능을 판단하기 힘들다. 따라서, 보다 정확한 실물화재시험의 필요성이 요구되고 있다. 난연 EPS샌드위치패널과 일반EPS샌드위치패널의 실물화재 실험결과 난연EPS샌드위치패널은 기타재료의 샌드위치패널과 열방출율, 연기발생율, 부분별 온도분포, 플래시오버등과 같은 난연성능이 EPS샌드위치패널과 우레탄폼패널보다 우수하며, 글라스울과 비슷한 성능을 나태내는 것을 확인 할 수 있다. 그래서 시공성, 경제성 등의 EPS샌드위치패널의 장점을 그대로 유지하며 난연제의 코팅법을 통해 우수한 난연성능을 확보하였다.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2006

This paper presents test results on reduced beam section (RBS)program addressed panel zone (PZ) strength as the key variables. PZ strength has been much debated issue for several decades. A desirable range of PZ strength has not yet been proposed despite the fact that a significant amount of RBS test data is available. Test results from this study and by others showed that panel zones could easily develop a plastic rotation of 0.01 radian without causing distress to the beam flange groove welds. At this deformation level, the amount of beam distortion (i.e., buckling) was about one half that developed in strong PZ specimens. A criterion for a balanced PZ strength that improves the plastic rotation capacity while reducing the amount of beam buckling is proposed.